k3b Fehler

Hallo, wollte grad eine 900mb DAten Cd Brennen, aber dann bricht k3b ijmmer mit folgendem Fehler ab:


Senden der cue Datei nicht möglich



System
-----------------------
K3b Version: 0.12

KDE Version: 3.5.0 Level "a"
QT Version: 3.3.5
Kernel: 2.6.13-15-default
Devices
-----------------------
YAMAHA CRW-F1E 1.0c (/dev/hdc, ) at /media/cdrecorder [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R]

LITE-ON DVDRW LDW-411S FS02 (/dev/hdd, ) at /media/cdrecorder2 [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]
K3b
-----------------------
Size of filesystem calculated: 459989

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW-F1E '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED DISKTATTOO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 7469952 = 7294 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
/usr/bin/cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
/usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.
Track 01: data 898 MB
Total size: 1031 MB (102:13.18) = 459989 sectors
Lout start: 1032 MB (102:15/14) = 459989 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -100140
Forcespeed is OFF.
Starting to write CD/DVD at speed 44 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
/usr/bin/cdrecord: Success. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 1D 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 29 (not valid)
resid: 32
cmd finished after 0.004s timeout 200s
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 17.790s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=44 -dao driveropts=burnfree -eject -overburn -data -tsize=459989s -

mkisofs
-----------------------
459989
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
0.11% done, estimate finish Tue Nov 29 13:03:03 2005
0.22% done, estimate finish Tue Nov 29 12:33:03 2005
0.33% done, estimate finish Tue Nov 29 12:22:42 2005
0.44% done, estimate finish Tue Nov 29 12:17:45 2005
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-Coolzero/k3by4WEra.tmp -rational-rock -hide-list /tmp/kde-Coolzero/k3bj2yPrc.tmp -joliet -hide-joliet-list /tmp/kde-Coolzero/k3bIXtOma.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-Coolzero/k3beVVW3b.tmp

Und wie gedenkst Du 900 MB auf eine CD zu bekommen?

Versteh die Frage nicht ganz!
Meinst du die Rohling größe?
Also das ist en 900Mb Rohling!!!!!!Auserdem hat das doch nichts mit der cue zu tun Oder!?

/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.

/usr/bin/cdrecord: CUE sheet still not accepted
Wieso das?

Im Raw Modus funzt es anscheinend , aber wieso nicht normal?

Muss mich korigieren, das brennen im raw modus hat bis zu 98% funktioniert, und dann kamm mkisoft wurde nicht sauber beendet und das:

System
-----------------------
K3b Version: 0.12

KDE Version: 3.5.0 Level "a"
QT Version: 3.3.5
Kernel: 2.6.13-15-default
Devices
-----------------------
YAMAHA CRW-F1E 1.0c (/dev/hdc, ) at /media/cdrecorder [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R]

LITE-ON DVDRW LDW-411S FS02 (/dev/hdd, ) at /media/cdrecorder2 [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]
K3b
-----------------------
Size of filesystem calculated: 459989

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW-F1E '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED DISKTATTOO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 7469952 = 7294 KB
FIFO size : 4194304 = 4096 KB
Encoding speed : 218x (16348 sectors/s) for libedc from Heiko Eißfeldt
/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
/usr/bin/cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
/usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.
Track 01: data 898 MB
Total size: 1031 MB (102:13.18) = 459989 sectors
Lout start: 1032 MB (102:15/14) = 459989 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -100140
Forcespeed is OFF.
Starting to write CD/DVD at speed 44 in real RAW/RAW96R mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (-149) using -11607 from ATIP
Writing lead-in at sector -11607
Lead-in write time: 22.286s
Writing pregap for track 1 at -150
Starting new track at sector: 0

Kannst du das mal editieren? Mein Mausrad quietscht schon. Also die 1000 unteressanten Zeilen mal rausnehmen... Und das Doppelposting eindampfen... :evil:

Ok, demnächst nur noch die letzten Zeilen!
Aber was meinst du mit doppelposting?

Du hast den ganzen, ellenlangen Senf nicht nur einmal sondern gleich zweimal gepostet. Bitte editier deine Postings. Das geht mit dem Edit-Button... Nimm halt alle unnötigen Zeilen wie

Track 01: 57 of 1073 MB written (fifo 92%) [buf 96%] 51.0x.
Track 01: 58 of 1073 MB written (fifo 100%) [buf 97%] 17.7x.
Track 01: 59 of 1073 MB written (fifo 100%) [buf 99%] 19.0x.
Track 01: 60 of 1073 MB written (fifo 96%) [buf 89%] 9.9x.

Zum Vergrößern anklicken....

raus. Dann liest das vielleicht auch einer... Ich hab jedenfalls keinen Bock das in hunderten von Zeilen zu lesen...

Moin Coolzero,

das Doppelposting hab ich jetzt gen /dev/null geschickt! Beim nächsten mal bitte selber machen.

Hallo, hab grad k3b 0.12.16 zu instalieren, hab es aus den sourcen compiliert , hat auch ohne Probleme geklappt, aber wenn ich es starten will kommt folgender Fehler:

k3b: error while loading shared libraries: libexpat.so.0: cannot open shared object file: No such file or directory



Hab schon überall nach der libexpat.so.0 gesucht, aber leider nix gefunden

Warum kompilierst du sowas selber?
Gibt es doch fertig bei Packman...

http://packman.links2linux.de/?action=219

Hab das rpm gezogen, aber immer noch der gleiche Fehler!

Muss also doch die Lib irgendwo her bekommen

Es gibt ein Paket 'expat' (Jedenfalls kommt expat im Namen vor). Such doch mal in deiner Paketverwaltung danach.
Wobei das rpm das dann auch als Abhängigkeit haben müsste.

Hast du Packman als Installationsquelle in yast hinzugefügt? Oder nutzt du smart?

hab packmann in yast, hab aber den eindruck alsob das nicht richtig funktionieren würde, denn er findet k3b in yast nicht

Da hast du einen richtigen Eindruck. Hast du die Quelle auf 'Aktiviert' und 'Aktualisieren' gesetzt?

so hab packmann jetzt am laufen und expat ist auhc instaliert, aber immer noch der fehler

Hallo, ich habe ein neues k3b Problem,
wollte grad verschiedene Daten auf ein Rohling brennen, die Rohlinge haben 900 Mb!
Hab versucht Daten mit ca 750 bis 810 Mb auf die Rohlinge zu brennen, aber immer bei 92% bricht er ab mit der Meldung:

Mkisofs wurde nicht sauber beendet
und in der Fehlerausgabe stehst folgendes:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.4 Level "a"
QT Version: 3.3.6
Kernel: 2.6.13-15.11-default
Devices
-----------------------
LITE-ON DVDRW LDW-411S FS02 (/dev/hdd, ) at /media/cdrecorder2 [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]

YAMAHA CRW-F1E 1.0c (/dev/hdc, ) at /media/cdrecorder2 [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R]
K3b
-----------------------
Size of filesystem calculated: 407298

Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW-F1E '
Revision : '1.0c'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED DISKTATTOO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 7469952 = 7294 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
/usr/bin/cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
/usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.
Track 01: data 795 MB
Total size: 913 MB (90:30.64) = 407298 sectors
Lout start: 913 MB (90:32/48) = 407298 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: -47452
Forcespeed is OFF.
Starting to write CD/DVD at speed 44 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 795 MB written.
Track 01: 1 of 795 MB written (fifo 81%) [buf 21%] 172.3x.
...
Track 01: 739 of 795 MB written (fifo 100%) [buf 99%] 39.2x.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 05 C7 86 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 E7 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk -419430400 (not valid)
resid: 63488
cmd finished after 0.049s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 775696384 bytes
Writing time: 225.978s
Average write speed 26.4x.
Min drive buffer fill was 1%
Total of 3 possible drive buffer underruns predicted.
Fixating...
Fixating time: 0.002s
/usr/bin/cdrecord: fifo had 12282 puts and 12219 gets.
/usr/bin/cdrecord: fifo was 268 times empty and 2891 times full, min fill was 0%.
BURN-Free was 7 times used.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=44 -dao driveropts=burnfree -eject -overburn -data -tsize=407298s -

mkisofs
-----------------------
407298
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
0.13% done, estimate finish Thu Aug 31 12:02:57 2006
...
93.42% done, estimate finish Thu Aug 31 11:40:23 2006

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-Coolzero/k3bSYxtSa.tmp -rational-rock -hide-list /tmp/kde-Coolzero/k3bH24F8a.tmp -joliet -hide-joliet-list /tmp/kde-Coolzero/k3bbIl28b.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-Coolzero/k3baSZFMb.tmp


Das seltsame ist das der Fehler nicht immer auftritt, nach einigen versuchen(und zerstörten Rohlingen)klappts dann, aber beim nächsten Versuch dann wieder nicht!

Hallo,

wenn ich dein Log-File richtig interpretiere, brennst du mit einem Yamaha CD-RW Brenner. Wie alt ist das Gerät und wie neu sind die Rohlinge, die du verwendest?
Hast du schon mal andere Rohlinge verwendet oder mal ein Firmware-Update des Rekorders gemacht? Ansonsten finde ich diese Info auch sehr interessant:

/usr/bin/cdrecord: WARNING: Data may not fit on current disk.
/usr/bin/cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
/usr/bin/cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
/usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity.

Zum Vergrößern anklicken....

Warum nimmst du eigentlich kein DVD-Rohling?

Viele Grüße

Alexander

Klar das wäre ne möglichkeit mit dem Dvd Rohling, aber dann hätte ich ca 3Gb verschwendet!

Das seltsame ist ja das ist ab und an geht und das andere mal nicht!

Klar der Brenner ist schon was älter, aber er unterstützt das über Brennen und ich habe diese Rohlinge auch schon normal bespielt!