• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

OpenSuse 15.1. auch keinen Sound..

thio

Hacker
Hallo,

habe nach Update auf Opensuse 15.1 keinen Sound mehr...

Code:
@linux:~> sudo hwinfo --sound
13: PCI 1b.0: 0403 Audio device                                 
  [Created at pci.386]
  Unique ID: u1Nb.XqoQVSBad36
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel Wildcat Point-LP High Definition Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x9ca0 "Wildcat Point-LP High Definition Audio Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x2293 
  Revision: 0x03
  Driver: "snd_hda_intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xc3214000-0xc3217fff (rw,non-prefetchable)
  IRQ: 52 (386 events)
  Module Alias: "pci:v00008086d00009CA0sv0000103Csd00002293bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=yes, avail=yes, need=no, active=unknown

18: PCI 03.0: 0403 Audio device
  [Created at pci.386]
  Unique ID: 3hqH.TrKRuPZeHH3
  SysFS ID: /devices/pci0000:00/0000:00:03.0
  SysFS BusID: 0000:00:03.0
  Hardware Class: sound
  Model: "Intel Broadwell-U Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x160c "Broadwell-U Audio Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x2293 
  Revision: 0x09
  Driver: "snd_hda_intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xc3210000-0xc3213fff (rw,non-prefetchable)                                                                                                             
  IRQ: 51 (88 events)                                                                                                                                                   
  Module Alias: "pci:v00008086d0000160Csv0000103Csd00002293bc04sc03i00"                                                                                                 
  Driver Info #0:                                                                                                                                                       
    Driver Status: snd_hda_intel is active                                                                                                                              
    Driver Activation Cmd: "modprobe snd_hda_intel"                                                                                                                     
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
 

Uwe.Lü

Hacker
thio schrieb:
Kann ich "Pulseaudio" löschen?
- ich denke - Nein, denn Pulseaudio war in früheren Versionen verantwortlich für den Sound.
Mein Ausgabe von hwinfo --sound sieht aus wie Deine, nur das bei mir ein Intel-Chipsatz werkelt.
Unter Yast - Audio sind bei mir aber sowohl der
"Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller", als auch der
"8 Series/C220 Series Chipset High Definition Audio Controller"
Nicht konfiguriert sind. Das werde ich auch so lassen, denn mein Sound läuft.
 
Oben