[solved] Konfiguration von Nouveau Treiber

Heinz-Peter · 3 Dez. 2013

Ich habe hier nach der Installation von Suse 13.1 den Nouveau Treiber und finde aber unter /etc/X11/ keine Datei mit dem Namen xorg.conf. Muss ich die Datei selber erstellen. Hier auf der Seite steht

Damit der neue Treiber genutzt werden kann, muss zunächst die X.Org-Einrichtungsdatei /etc/X11/xorg.conf angepasst werden (root-Rechte werden benötigt).

In "Infozentrum" > "Grafische Informationen" > OpenGL steht der nouveau Treiber.
Warum fehlt die xorg.conf bei mir? Habe nur die xorg.conf.install, siehe unten

Code:

Section "Device"
  Identifier "vboxvideo"
  Driver  "vboxvideo"
EndSection

Section "Screen"
  Identifier "vboxvideo"
  Device "vboxvideo"
EndSection


Section "Device"
  Identifier "vmware"
  Driver  "vmware"
EndSection

Section "Screen"
  Identifier "vmware"
  Device "vmware"
EndSection


Section "Device"
  Identifier "modesetting"
  Driver  "modesetting"
EndSection
Section "Screen"
  Identifier "modesetting"
  Device "modesetting"
EndSection


Section "Device"
  Identifier "fbdev"
  Driver  "fbdev"
EndSection
Section "Screen"
  Identifier "fbdev"
  Device "fbdev"
EndSection


Section "Device"
  Identifier "vesa"
  Driver  "vesa"
EndSection

Section "Screen"
  Identifier "vesa"
  Device "vesa"
EndSection


Section "ServerLayout"
  Identifier "Layout"
  Screen  "vboxvideo"
  Screen  "vmware"
  Screen  "modesetting"
  Screen  "fbdev"
  Screen  "vesa"
EndSection

Was ist bei der Installation schief gelaufen?

tomm.fa · 3 Dez. 2013

Heinz-Peter schrieb:
Was ist bei der Installation schief gelaufen?

Nichts, die xorg.conf wurde schon vor längerer Zeit entfernt, dafür ist jetzt alles einzeln unter /etc/X11/xorg.conf.d/ zu finden.

Du suchst:
/etc/X11/xorg.conf.d/05-glamor.conf
und:
/etc/X11/xorg.conf.d/50-device.conf
, wozu auch immer, da eigentlich unnötig.

Möchtest du dennoch lieber die xorg.conf verwenden, dann musst du diese erst erstellen.

towo · 3 Dez. 2013

Für nouveau brauchts keine xorg.conf.

Heinz-Peter · 3 Dez. 2013

Danke für Eure Hilfe!
OK die xorg.conf wird nicht mehr benötigt, aber wo kann ich die Auflösung von meinem Monitor einstellen.
Gehe ich zu ´Systemeinstellungen´ > ´Anzeige und Monitor` dann finde ich keine Möglichkeit was zu ändern.

tomm.fa · 3 Dez. 2013

Heinz-Peter schrieb:
OK die xorg.conf wird nicht mehr benötigt, aber wo kann ich die Auflösung von meinem Monitor einstellen.
Gehe ich zu ´Systemeinstellungen´ > ´Anzeige und Monitor` dann finde ich keine Möglichkeit was zu ändern.

tomm.fa schrieb:

[…] dafür ist jetzt alles einzeln unter /etc/X11/xorg.conf.d/ zu finden.

Zum Vergrößern anklicken....
nouveau wird auch wirklich verwendet? Ausgabe von:
Code:
```
/sbin/lspci -nnk | grep -i -A3 vga
```
präsentieren.
Der Befehl xrandr gibt was aus?
In /var/log/Xorg.0.log irgendwelche unerwünschten Hinweise?

Heinz-Peter · 3 Dez. 2013

Ich werde verrückt noch hier. Nach dem Versuch NVIDIA Treiber zu installieren und nach dem Abbruch wegen der Meldung: "The Nouveau kernel driver carrente in user... und dann The device is incompatible witth the NVIDIA driver...." habe ich jetzt unter KDE Infozentrum das hier: VMware.
Die Monitor Auflösung hat sich auch automatisch geändert, ich schätze so auf 1024x768.
Die Einstellmöglichkeit ist aber unter Systemeinstellungen > Anzeige und Monitor immer noch nicht vorhanden.
# lspci -nnk | grep -i -A3 vga

Code:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 6610 XL] [10de:0145] (rev a2)
        Subsystem: Micro-Star International Co., Ltd. Device [1462:9790]
        Kernel modules: nvidiafb, nouveau
03:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)

# xrandr

Code:

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
   1024x768       76.0*

Die Ausgabe von /var/log/Xorg.0.log

Code:

[    16.930] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    16.930] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[    16.930] X Protocol Version 11, Revision 0
[    16.930] Build Operating System: openSUSE SUSE LINUX
[    16.930] Current Operating System: Linux linux-9fdt 3.11.6-4-default #1 SMP Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) i686
[    16.930] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part8 resume=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part7 splash=verbose vga=0x317
[    16.930] Build Date: 06 November 2013  10:10:43AM
[    16.930]  
[    16.930] Current version of pixman: 0.30.2
[    16.930] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    16.930] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.931] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  3 22:12:10 2013
[    16.931] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.931] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.932] (==) No Layout section.  Using the first Screen section.
[    16.932] (==) No screen section available. Using defaults.
[    16.932] (**) |-->Screen "Default Screen Section" (0)
[    16.932] (**) |   |-->Monitor "<default monitor>"
[    16.933] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.933] (==) Automatically adding devices
[    16.933] (==) Automatically enabling devices
[    16.933] (==) Automatically adding GPU devices
[    16.933] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    16.933] 	Entry deleted from font path.
[    16.933] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[    16.933] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    16.933] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.933] (II) Loader magic: 0x8260620
[    16.933] (II) Module ABI versions:
[    16.933] 	X.Org ANSI C Emulation: 0.4
[    16.933] 	X.Org Video Driver: 14.1
[    16.933] 	X.Org XInput driver : 19.1
[    16.933] 	X.Org Server Extension : 7.0
[    16.936] (--) PCI:*(0:1:0:0) 10de:0145:1462:9790 rev 162, Mem @ 0xd0000000/67108864, 0xc8000000/134217728, 0xd4000000/16777216, BIOS @ 0x????????/131072
[    16.936] Initializing built-in extension Generic Event Extension
[    16.936] Initializing built-in extension SHAPE
[    16.936] Initializing built-in extension MIT-SHM
[    16.936] Initializing built-in extension XInputExtension
[    16.936] Initializing built-in extension XTEST
[    16.936] Initializing built-in extension BIG-REQUESTS
[    16.936] Initializing built-in extension SYNC
[    16.936] Initializing built-in extension XKEYBOARD
[    16.936] Initializing built-in extension XC-MISC
[    16.936] Initializing built-in extension SECURITY
[    16.936] Initializing built-in extension XINERAMA
[    16.936] Initializing built-in extension XFIXES
[    16.936] Initializing built-in extension RENDER
[    16.936] Initializing built-in extension RANDR
[    16.936] Initializing built-in extension COMPOSITE
[    16.936] Initializing built-in extension DAMAGE
[    16.936] Initializing built-in extension MIT-SCREEN-SAVER
[    16.936] Initializing built-in extension DOUBLE-BUFFER
[    16.936] Initializing built-in extension RECORD
[    16.936] Initializing built-in extension DPMS
[    16.936] Initializing built-in extension X-Resource
[    16.936] Initializing built-in extension XVideo
[    16.936] Initializing built-in extension XVideo-MotionCompensation
[    16.936] Initializing built-in extension XFree86-VidModeExtension
[    16.936] Initializing built-in extension XFree86-DGA
[    16.936] Initializing built-in extension XFree86-DRI
[    16.936] Initializing built-in extension DRI2
[    16.937] (II) LoadModule: "glx"
[    17.007] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.007] (II) Module glx: vendor="X.Org Foundation"
[    17.007] 	compiled for 1.14.3.901, module version = 1.0.0
[    17.007] 	ABI class: X.Org Server Extension, version 7.0
[    17.007] (==) AIGLX enabled
[    17.007] Loading extension GLX
[    17.007] (==) Matched nvidia as autoconfigured driver 0
[    17.007] (==) Matched nouveau as autoconfigured driver 1
[    17.007] (==) Matched nv as autoconfigured driver 2
[    17.007] (==) Matched modesetting as autoconfigured driver 3
[    17.007] (==) Matched fbdev as autoconfigured driver 4
[    17.007] (==) Matched vesa as autoconfigured driver 5
[    17.007] (==) Assigned the driver to the xf86ConfigLayout
[    17.007] (II) LoadModule: "nvidia"
[    17.008] (WW) Warning, couldn't open module nvidia
[    17.008] (II) UnloadModule: "nvidia"
[    17.008] (II) Unloading nvidia
[    17.008] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    17.008] (II) LoadModule: "nouveau"
[    17.009] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.009] (II) Module nouveau: vendor="X.Org Foundation"
[    17.009] 	compiled for 1.14.3, module version = 1.0.9
[    17.009] 	Module class: X.Org Video Driver
[    17.009] 	ABI class: X.Org Video Driver, version 14.1
[    17.009] (II) LoadModule: "nv"
[    17.009] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[    17.332] (II) Module nv: vendor="X.Org Foundation"
[    17.332] 	compiled for 1.14.3, module version = 2.1.20
[    17.332] 	Module class: X.Org Video Driver
[    17.332] 	ABI class: X.Org Video Driver, version 14.1
[    17.332] (II) LoadModule: "modesetting"
[    17.332] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.332] (II) Module modesetting: vendor="X.Org Foundation"
[    17.332] 	compiled for 1.14.3, module version = 0.8.0
[    17.332] 	Module class: X.Org Video Driver
[    17.332] 	ABI class: X.Org Video Driver, version 14.1
[    17.332] (II) LoadModule: "fbdev"
[    17.332] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.333] (II) Module fbdev: vendor="X.Org Foundation"
[    17.333] 	compiled for 1.14.3, module version = 0.4.3
[    17.333] 	Module class: X.Org Video Driver
[    17.333] 	ABI class: X.Org Video Driver, version 14.1
[    17.333] (II) LoadModule: "vesa"
[    17.333] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.333] (II) Module vesa: vendor="X.Org Foundation"
[    17.333] 	compiled for 1.14.3, module version = 2.3.3
[    17.333] 	Module class: X.Org Video Driver
[    17.333] 	ABI class: X.Org Video Driver, version 14.1
[    17.333] (II) NOUVEAU driver 
[    17.333] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.333] 	RIVA TNT        (NV04)
[    17.333] 	RIVA TNT2       (NV05)
[    17.333] 	GeForce 256     (NV10)
[    17.333] 	GeForce 2       (NV11, NV15)
[    17.333] 	GeForce 4MX     (NV17, NV18)
[    17.333] 	GeForce 3       (NV20)
[    17.334] 	GeForce 4Ti     (NV25, NV28)
[    17.334] 	GeForce FX      (NV3x)
[    17.334] 	GeForce 6       (NV4x)
[    17.334] 	GeForce 7       (G7x)
[    17.334] 	GeForce 8       (G8x)
[    17.334] 	GeForce GTX 200 (NVA0)
[    17.334] 	GeForce GTX 400 (NVC0)
[    17.334] (II) NOUVEAU driver 
[    17.334] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.334] 	RIVA TNT        (NV04)
[    17.334] 	RIVA TNT2       (NV05)
[    17.334] 	GeForce 256     (NV10)
[    17.334] 	GeForce 2       (NV11, NV15)
[    17.334] 	GeForce 4MX     (NV17, NV18)
[    17.334] 	GeForce 3       (NV20)
[    17.334] 	GeForce 4Ti     (NV25, NV28)
[    17.334] 	GeForce FX      (NV3x)
[    17.334] 	GeForce 6       (NV4x)
[    17.334] 	GeForce 7       (G7x)
[    17.335] 	GeForce 8       (G8x)
[    17.335] 	GeForce GTX 200 (NVA0)
[    17.335] 	GeForce GTX 400 (NVC0)
[    17.335] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.335] (II) FBDEV: driver for framebuffer: fbdev
[    17.335] (II) VESA: driver for VESA chipsets: vesa
[    17.335] (++) using VT number 7

[    17.335] (EE) [drm] KMS not enabled
[    17.335] (EE) [drm] KMS not enabled
[    17.335] (EE) open /dev/dri/card0: No such file or directory
[    17.335] (WW) Falling back to old probe method for modesetting
[    17.335] (EE) open /dev/dri/card0: No such file or directory
[    17.335] (II) Loading sub module "fbdevhw"
[    17.335] (II) LoadModule: "fbdevhw"
[    17.336] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.336] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.336] 	compiled for 1.14.3.901, module version = 0.0.2
[    17.336] 	ABI class: X.Org Video Driver, version 14.1
[    17.336] (**) FBDEV(1): claimed PCI slot 1@0:0:0
[    17.336] (II) FBDEV(1): using default device
[    17.336] (WW) Falling back to old probe method for vesa
[    17.336] (EE) Screen 0 deleted because of no matching config section.
[    17.336] (II) UnloadModule: "modesetting"
[    17.336] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 16/16
[    17.336] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    17.336] (==) FBDEV(0): RGB weight 565
[    17.336] (==) FBDEV(0): Default visual is TrueColor
[    17.336] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.336] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
[    17.336] (II) FBDEV(0): checking modes against framebuffer device...
[    17.336] (II) FBDEV(0): checking modes against monitor...
[    17.336] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[    17.336] (**) FBDEV(0):  Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[    17.336] (II) FBDEV(0): Modeline "current"x0.0   78.65  1024 1056 1184 1312  768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[    17.336] (==) FBDEV(0): DPI set to (96, 96)
[    17.336] (II) Loading sub module "fb"
[    17.336] (II) LoadModule: "fb"
[    17.337] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.337] (II) Module fb: vendor="X.Org Foundation"
[    17.337] 	compiled for 1.14.3.901, module version = 1.0.0
[    17.337] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.337] (**) FBDEV(0): using shadow framebuffer
[    17.337] (II) Loading sub module "shadow"
[    17.337] (II) LoadModule: "shadow"
[    17.337] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    17.587] (II) Module shadow: vendor="X.Org Foundation"
[    17.587] 	compiled for 1.14.3.901, module version = 1.1.0
[    17.587] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.587] (II) UnloadModule: "vesa"
[    17.587] (II) Unloading vesa
[    17.587] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    17.588] (==) FBDEV(0): Backing store disabled
[    17.588] (==) FBDEV(0): DPMS enabled
[    17.588] (==) RandR enabled
[    17.601] (II) AIGLX: Screen 0 is not DRI2 capable
[    17.601] (II) AIGLX: Screen 0 is not DRI capable
[    18.648] (II) AIGLX: Loaded and initialized swrast
[    18.648] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    19.639] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.639] (**) Power Button: Applying InputClass "LocalKeyboard"
[    19.639] (II) LoadModule: "evdev"
[    19.640] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.641] (II) Module evdev: vendor="X.Org Foundation"
[    19.641] 	compiled for 1.14.3, module version = 2.8.2
[    19.641] 	Module class: X.Org XInput Driver
[    19.641] 	ABI class: X.Org XInput driver, version 19.1
[    19.641] (II) Using input driver 'evdev' for 'Power Button'
[    19.641] (**) Power Button: always reports core events
[    19.641] (**) evdev: Power Button: Device: "/dev/input/event2"
[    19.641] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.641] (--) evdev: Power Button: Found keys
[    19.641] (II) evdev: Power Button: Configuring as keyboard
[    19.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[    19.641] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.641] (**) Option "xkb_rules" "evdev"
[    19.641] (**) Option "xkb_model" "pc104"
[    19.641] (**) Option "xkb_layout" "de"
[    19.641] (**) Option "xkb_variant" "nodeadkeys"
[    19.705] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    19.706] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.706] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.706] (**) Power Button: Applying InputClass "LocalKeyboard"
[    19.706] (II) Using input driver 'evdev' for 'Power Button'
[    19.706] (**) Power Button: always reports core events
[    19.706] (**) evdev: Power Button: Device: "/dev/input/event0"
[    19.706] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.706] (--) evdev: Power Button: Found keys
[    19.706] (II) evdev: Power Button: Configuring as keyboard
[    19.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    19.706] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    19.706] (**) Option "xkb_rules" "evdev"
[    19.706] (**) Option "xkb_model" "pc104"
[    19.706] (**) Option "xkb_layout" "de"
[    19.706] (**) Option "xkb_variant" "nodeadkeys"
[    19.707] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    19.707] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.707] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.707] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[    19.707] (II) Using input driver 'evdev' for 'Sleep Button'
[    19.707] (**) Sleep Button: always reports core events
[    19.707] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    19.708] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    19.708] (--) evdev: Sleep Button: Found keys
[    19.708] (II) evdev: Sleep Button: Configuring as keyboard
[    19.708] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    19.708] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    19.708] (**) Option "xkb_rules" "evdev"
[    19.708] (**) Option "xkb_model" "pc104"
[    19.708] (**) Option "xkb_layout" "de"
[    19.708] (**) Option "xkb_variant" "nodeadkeys"
[    19.709] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    19.709] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.709] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.709] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[    19.709] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.709] (**) Logitech USB Receiver: always reports core events
[    19.709] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    19.710] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    19.710] (--) evdev: Logitech USB Receiver: Found keys
[    19.710] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    19.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2/event3"
[    19.710] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    19.710] (**) Option "xkb_rules" "evdev"
[    19.710] (**) Option "xkb_model" "pc104"
[    19.710] (**) Option "xkb_layout" "de"
[    19.710] (**) Option "xkb_variant" "nodeadkeys"
[    19.712] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[    19.712] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    19.712] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.712] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    19.712] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.712] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[    19.712] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.712] (**) Logitech USB Receiver: always reports core events
[    19.712] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[    19.712] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    19.712] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    19.712] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    19.712] (--) evdev: Logitech USB Receiver: Found relative axes
[    19.712] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    19.712] (--) evdev: Logitech USB Receiver: Found absolute axes
[    19.712] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    19.712] (--) evdev: Logitech USB Receiver: Found keys
[    19.712] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    19.712] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    19.712] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    19.712] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    19.712] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input6/event6"
[    19.712] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    19.713] (**) Option "xkb_rules" "evdev"
[    19.713] (**) Option "xkb_model" "pc104"
[    19.713] (**) Option "xkb_layout" "de"
[    19.713] (**) Option "xkb_variant" "nodeadkeys"
[    19.713] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    19.713] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    19.714] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    19.714] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    19.714] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    19.714] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    19.714] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[    19.715] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[    19.715] (II) No input driver specified, ignoring this device.
[    19.715] (II) This device may have been added with another device file.
[    19.715] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver mouse (/dev/input/event5)
[    19.715] (**) X10 Wireless Technology Inc USB Receiver mouse: Applying InputClass "evdev pointer catchall"
[    19.715] (**) X10 Wireless Technology Inc USB Receiver mouse: Applying InputClass "evdev pointer catchall"
[    19.715] (II) Using input driver 'evdev' for 'X10 Wireless Technology Inc USB Receiver mouse'
[    19.715] (**) X10 Wireless Technology Inc USB Receiver mouse: always reports core events
[    19.716] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: Device: "/dev/input/event5"
[    19.716] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Vendor 0xbc7 Product 0x6
[    19.716] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found 9 mouse buttons
[    19.716] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found relative axes
[    19.716] (--) evdev: X10 Wireless Technology Inc USB Receiver mouse: Found x and y relative axes
[    19.716] (II) evdev: X10 Wireless Technology Inc USB Receiver mouse: Configuring as mouse
[    19.716] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: YAxisMapping: buttons 4 and 5
[    19.716] (**) evdev: X10 Wireless Technology Inc USB Receiver mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input5/event5"
[    19.716] (II) XINPUT: Adding extended input device "X10 Wireless Technology Inc USB Receiver mouse" (type: MOUSE, id 11)
[    19.716] (II) evdev: X10 Wireless Technology Inc USB Receiver mouse: initialized for relative axes.
[    19.716] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) keeping acceleration scheme 1
[    19.716] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration profile 0
[    19.717] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration factor: 2.000
[    19.717] (**) X10 Wireless Technology Inc USB Receiver mouse: (accel) acceleration threshold: 4
[    19.717] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver mouse (/dev/input/mouse0)
[    19.717] (II) No input driver specified, ignoring this device.
[    19.717] (II) This device may have been added with another device file.
[    19.718] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver (/dev/input/event4)
[    19.718] (**) X10 Wireless Technology Inc USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.718] (**) X10 Wireless Technology Inc USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.718] (**) X10 Wireless Technology Inc USB Receiver: Applying InputClass "LocalKeyboard"
[    19.718] (II) Using input driver 'evdev' for 'X10 Wireless Technology Inc USB Receiver'
[    19.718] (**) X10 Wireless Technology Inc USB Receiver: always reports core events
[    19.718] (**) evdev: X10 Wireless Technology Inc USB Receiver: Device: "/dev/input/event4"
[    19.718] (--) evdev: X10 Wireless Technology Inc USB Receiver: Vendor 0xbc7 Product 0x6
[    19.718] (--) evdev: X10 Wireless Technology Inc USB Receiver: Found keys
[    19.718] (II) evdev: X10 Wireless Technology Inc USB Receiver: Configuring as keyboard
[    19.718] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/rc/rc0/input4/event4"
[    19.718] (II) XINPUT: Adding extended input device "X10 Wireless Technology Inc USB Receiver" (type: KEYBOARD, id 12)
[    19.719] (**) Option "xkb_rules" "evdev"
[    19.719] (**) Option "xkb_model" "pc104"
[    19.719] (**) Option "xkb_layout" "de"
[    19.719] (**) Option "xkb_variant" "nodeadkeys"
[    19.720] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    19.720] (II) No input driver specified, ignoring this device.
[    19.720] (II) This device may have been added with another device file.
[    19.734] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    42.987] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    42.987] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    43.207] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)

Edit: Habe das hier gelesen http://de.opensuse.org/VMware und überlege wie komm ich hier wieder raus? Mit VMware habe ich mich noch nicht beschäftigt.

josef-wien · 3 Dez. 2013

nouveau braucht kernel mode setting (KMS), diese Kombination funktioniert bei Dir offenbar nicht richtig
([ 17.336] (II) UnloadModule: "modesetting"), daher wird der frame buffer-Treiber verwendet, und der kann nicht mehr als 1024x768.

Heinz-Peter schrieb:
Nach dem Versuch NVIDIA Treiber zu installieren

Welche Version war das? Hast Du das System mit der Boot-Option nomodeset gestartet?

Heinz-Peter schrieb:
unter KDE Infozentrum das hier: VMware

Was hat eine virtuelle Maschine mit einem Grafiktreiber zu tun?

Heinz-Peter · 3 Dez. 2013

Welche Version war das?

Die Version 304.116 er

Hast Du das System mit der Boot-Option nomodeset gestartet?

Nein, ich bin in ´init 3´ gewechselt.

Was hat eine virtuelle Maschine mit einem Grafiktreiber zu tun?

Keine Ahnung wie das zu Stande kam. KDE Infozentrum zeigt als Treiber VMware.

In /etc/modprobe.d/ habe ich jetzt eine nvidia.conf Datei mit dem Text => blacklist nouveau

muck19 · 4 Dez. 2013

Heinz-Peter schrieb:
In /etc/modprobe.d/ habe ich jetzt eine nvidia.conf Datei mit dem Text => blacklist nouveau

Würde sagen - installiere jetzt auf init 3 den nvidia Treiber nochmals ....

Gruss
Michael

josef-wien · 4 Dez. 2013

Und was steckt in der initrd?

Code:

gzip -cd /boot/initrd | cpio -ivt | egrep "nvidia|nouveau"

Heinz-Peter · 4 Dez. 2013

muck19 schrieb:
Heinz-Peter schrieb:

In /etc/modprobe.d/ habe ich jetzt eine nvidia.conf Datei mit dem Text => blacklist nouveau

Zum Vergrößern anklicken....

Würde sagen - installiere jetzt auf init 3 den nvidia Treiber nochmals ....l

Eigentlich das wollte ich, aber im Moment hätte ich gerne gewusst wie komme ich zurück zu nouveau Treiber. Es wurden zwei Meldungen bei der nvidia-install ausgegeben und die letzte Meldung habe ich wahrscheinlich falsch quittiert.

josef-wien schrieb:
Und was steckt in der initrd?

Code:

gzip -cd /boot/initrd | cpio -ivt | egrep "nvidia|nouveau"

Das hier:

Code:

-rw-r--r--   1 root     root           18 Dec  3 20:00 etc/modprobe.d/nvidia.conf
80251 blocks

Ich muss schon sagen dass das KDE-Infozentrum hat mich angelogen mit der VMware.
An der stelle wo jetzt VMware steht hat vorher der nouveau Treiber gestanden, eigentlich sollte hier jetzt der framebuffer (oder fb) stehen. Hier zwei Bildschirmfotos zu dem KDE- Infozentrum:
http://www.bilder-hochladen.tv/pic/W3xWpvHQ/
http://www.bilder-hochladen.tv/pic/FpTXohgy/
Das die xorg.conf nicht mehr existiert bin ich momentan am suchen wo die alle Einträge zu GRAKA, Monitor usw. zu finden sind.

tomm.fa" am 03.12.13 um 22:30 schrieb:
Nichts, die xorg.conf wurde schon vor längerer Zeit entfernt, dafür ist jetzt alles einzeln unter /etc/X11/xorg.conf.d/ zu finden.

Du suchst:
/etc/X11/xorg.conf.d/05-glamor.conf
und:
/etc/X11/xorg.conf.d/50-device.conf
, wozu auch immer, da eigentlich unnötig.

Da steh ich nun, ich armer Tor! und bin so klug als wie zuvor.

Ich denke

Code:

man xorg.conf.d

sollte mich weiter bringen.

josef-wien · 4 Dez. 2013

Heinz-Peter schrieb:
wie komme ich zurück zu nouveau Treiber

Du mußt alle Dateien entfernen, die bei Deinem Nvidia-Installationsversuch erzeugt wurden, vielleicht kann Dir http://www.linux-club.de/viewtopic.php?f=92&t=118294#p749646 dabei helfen. Nach dem Entfernen von /etc/modprobe.d/nvidia.conf muß die initrd neu erstellt werden. Wenn Du das eventuell unterhalb von /lib/modules/$(uname -r) erzeugte nvidia-Modul entsorgst, mußt Du danach depmod -a ausführen.

Heinz-Peter schrieb:
bin ich momentan am suchen

Du wirst nichts finden, die freien Treiber kommen mittlerweile in fast allen Fällen ohne Konfigurationsdateien aus (daher enthalten 50-device.conf, 50-monitor.conf und 50-screen.conf in /etc/X11/xorg.conf.d standardmäßig nur Kommentare). Lediglich fglrx und nvidia erstellen üblicherweise noch eine xorg.conf.

P. S. VMware ist für Mesa und Gallium zuständig, daher scheint die Firma als Hersteller auf.

Heinz-Peter · 5 Dez. 2013

josef-wien schrieb:
Du mußt alle Dateien entfernen, die bei Deinem Nvidia-Installationsversuch erzeugt wurden, vielleicht kann Dir viewtopic.php?f=92&t=118294#p749646 dabei helfen. Nach dem Entfernen von /etc/modprobe.d/nvidia.conf muß die initrd neu erstellt werden. Wenn Du das eventuell unterhalb von /lib/modules/$(uname -r) erzeugte nvidia-Modul entsorgst, mußt Du danach depmod -a ausführen.

Das war mir doch zu viel Arbeit, bin mittlerweile in die Jahre gekommen

und habe den nvidia Treiber installiert. Hier für die Querleser => http://www.linux-club.de/viewtopic.php?f=87&t=118607

Danke an Alle die hier geholfen haben und vor allem an josef-wien für seine Aussagekräftige Kommentare.

Grüße Heinz-Peter

[solved] Konfiguration von Nouveau Treiber

Heinz-Peter

Guru

tomm.fa

Administrator

towo

Moderator

Heinz-Peter

Guru

tomm.fa

Administrator

Heinz-Peter

Guru

josef-wien

Ultimate Guru

Heinz-Peter

Guru

muck19

Hacker

josef-wien

Ultimate Guru

Heinz-Peter

Guru

josef-wien

Ultimate Guru

Heinz-Peter

Guru