• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[solved] Suse 11.3 installiert und kaffeine zeigt nichts

Valsi

Hacker
Hallo,

ich habe heute Suse 11.3 installiert da meine 11.1 ja bald (ober bereits) nicht mehr unterstützt wird. Soweit so gut nur Kaffeine zeigt bei den mp4 Dateien eine schwarzes Fenster und gibt keinen Ton von sich.

Was tun ist hier die Frage.

Bez. der Installation sehe ich keine Probleme:

Code:
rudolf@linux-7ewy:~> rpm -qa | grep kaffeine
kaffeine-1.1-1.pm.1.1.i586
kaffeine-lang-1.1-1.pm.1.1.noarch
rudolf@linux-7ewy:~> rpm -qu | grep xine
-qu: Unbekannte Option
rudolf@linux-7ewy:~> rpm -qa | grep xine
libxine1-codecs-1.1.19-2.pm.48.13.i586
libxine1-pulse-1.1.19-2.pm.48.13.i586
phonon-backend-xine-4.4.2-1.6.i586
libxine1-1.1.19-2.pm.48.13.i586
libxine1-gnome-vfs-1.1.19-2.pm.48.13.i586
xinetd-2.3.14-149.1.i586
kdebase4-runtime-xine-4.4.4-3.1.2.i586

Bevor ich den Nvidia Treiber (habe so eine Graka) installiere, möchte ich Euren geschätzten Rat in Erfahrung bringen, ob es denn eine andere Lösung gäbe....

lg

Rudi

Link zu Nividia Treiber:

http://www.linux-club.de/viewtopic.php?f=18&t=111304&p=693659&hilit=kaffeine#p693659
 
OP
V

Valsi

Hacker
Hallo,

ja war es. Interessant ist dabei dass es manchmal funktioniert, wenn ich kaffeine zuerst starte und aus kaffeine die Datei öffne. die Datei anklicken hat noch nie funktioniert.

Nachtrag: gxine geht auch nicht.....

Nachtrag 2: Mplayer geht.... :irre:

lg

Rudi
 
Was ist daran so ungewöhnlich? MPlayer ist ein völlig anderes Paket als Xine.

Starte Kaffeine doch mal aus einer Konsole

Code:
kaffeine /pfad/zu/einer/videodatei.mp4
 
OP
V

Valsi

Hacker
Hallo,

hier der Start aus der Konsole:

Code:
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/Maria LINNEMANN - Sempre Solo.mp4
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden
rudolf@linux-7ewy:~>

Was sucht er/sie/es denn da? Das Verzeichnis gibt es nicht.

lg

Rudi
 
Kapiere ich jetzt auch nicht so ganz, aber die Leerzeichen im Dateinamen musst Du ohnehin in der Konsole escapen, am besten mit der Tab-taste, etwa so:

Code:
kaffeine /home/rudolf/Desktop/Maria[*tab*]

/.smb/smb.conf.append klingt nach Samba (*totalunsichersei*), läuft in der Richtung was bei Dir? Bei mir gibt's das Verzeichnis ebenfalls nicht.
 

Tooltime

Advanced Hacker
Oder den Dateinamen mit Anführungszeichen angeben bzw. den ganzen Pfad:
  • kaffeine "/home/rudolf/Desktop/Maria LINNEMANN - Sempre Solo.mp4"
 
OP
V

Valsi

Hacker
Hallo,


Samba habe ich nicht am Laufen under Tip mit dem Anführungszeichen hatte keinen Erfolg gebracht

lg

Rudi
 

tomm.fa

Administrator
Teammitglied
Was mit mit den Vorschlag von gropiuskalle? Wort anfangen zu, bzw. Wortanfang schreiben und dann TAB drücken, dass Ergebnis müsste ja dann ungefähr so aussehen:
Code:
kaffeine /home/rudolf/Desktop/Maria\LINNEMANN\-\Sempre\Solo.mp4
Leerzeichen werden meistens mit \ ersetzt.
 
OP
V

Valsi

Hacker
Hallo,

da meckert er wie oben gezeigt:

Code:
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/Maria\LINNEMANN\-\Sempre\Solo.mp4
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden
rudolf@linux-7ewy:~>

lg

Rudi
 
Ich blicke da jetzt auch nicht durch, zumal ich nicht weiß, was '.smb' für ein config-Verzeichnis sein könnte. Sind da vielleicht irgendwelche Einstellungen von Kaffeine am sabotieren? Beende Kaffeine und verschiebe doch mal die Konfigurationen von Kaffeine (~/.kde4/share/apps/kaffeine, ~/.kde4/share/config/kaffeinerc, ~/.kde4/share/config/kaffeine4rc) und versuche es erneut.
 
OP
V

Valsi

Hacker
Hallo,

habe heute Deine Idee ausprobiert:

Code:
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/DScarlatti\ Sonate\ L23-Sven\ Lundestad\ guitar.mp4 
rudolf@linux-7ewy:~> params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden
received X error event: BadMatch (invalid parameter attributes)
X Error: BadMatch (invalid parameter attributes) 8
  Extension:    132 (Uknown extension)
  Minor opcode: 17 (Unknown request)
  Resource id:  0x3f
KCrash: Application 'kaffeine-xbu' crashing...
sock_file=/home/rudolf/.kde4/socket-linux-7ewy/kdeinit4__0
abort: audio_alsa_out.c:853: ao_alsa_write: Aborting.
Unable to start Dr. Konqi

Allerdings habe ich die letzte der drei zu verschiebenden Dateien nicht gefunden...

Ich denke aber nicht dass es an Kaffeine liegt sonder an libxine o.ä. da dieses Programm ja auch nicht will

lg

Rudi
 
OP
V

Valsi

Hacker
Hallo,

hier der gxine start azs de Konsole:

Code:
rudolf@linux-7ewy:~> gxine
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden

(gxine_bin:28560): Gtk-CRITICAL **: gtk_style_detach: assertion `style->attach_count > 0' failed
Warnung: Konfigurationseintrag media.capture.save_dir verweist auf die nicht-existente Stelle 
Warnung: Konfigurationseintrag media.dvb.channels_conf verweist auf die nicht-existente Stelle /home/rudolf/.xine/channels.conf
Warnung: Konfigurationseintrag media.video4linux.radio_device verweist auf die nicht-existente Stelle /dev/radio0
Warnung: Konfigurationseintrag media.video4linux.video_device verweist auf die nicht-existente Stelle /dev/video0
Warnung: Konfigurationseintrag media.wintv_pvr.device verweist auf die nicht-existente Stelle /dev/video0
Warnung: Konfigurationseintrag decoder.external.real_codecs_path verweist auf die nicht-existente Stelle 
Warnung: Konfigurationseintrag subtitles.separate.font_freetype verweist auf die nicht-existente Stelle 
libgnomeui-2.so.0: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden.
lirc: Kann nicht initialisieren - Fernbedienung deaktiviert
lirc: Evtl. läuft lircd nicht oder der Socket kann nicht verbunden werden?
In gxine ist ein fataler interner Fehler aufgetreten.
Um einen 'backtrace' zu bekommen, starten sie gxine in einem Debugger wie gdb.
Dann, wenn der Fehler auftritt:
  (gdb) thread apply all bt
gxine: Fehler: Fataler Fehler: Speicherzugriffsfehler
rudolf@linux-7ewy:~>

lg

Rudi
 

wirrwarr

Hacker
Hallo Valsi,
ich habe gerade
Code:
xine --verbose 5
ausgeführt. Bei mir sucht xine ebenfalls in meinenm home-verzeichnis nach der
Datei ~/.smb/smb.conf, sowie ~/.smb/smb.conf.append die nicht vorhanden sind. Aber das hat bei mir keinen Hänger zufolge.
Xine läuft sauber durch.

Gruß wirrwarr
 
xine stellt ein sehr nützliches Skript zur Verfügung, starte das mal und gehe es Punkt für Punkt durch, vielleicht kommen wir dann dem eigentlichen Problem näher (welche wohl nicht dieses fehlende Verzeichnis zu sein scheint).

Code:
xine-check
 
OP
V

Valsi

Hacker
Hallo,

das kennt er nicht!?

Code:
rudolf@linux-7ewy:~> xine-check
If 'xine-check' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf xine-check

lg

Rudi
 
OP
V

Valsi

Hacker
Hallo,

ja wer lesen kann ist im Vorteil. Ich habe das fehlende Paket installiert und nun ist xine gesprächig:

Code:
rudolf@linux-7ewy:~> xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.6.34.7-0.7-default)
[ good ] intel compatible processor, checking MTRR support
[ good ] you have MTRR support and there are some ranges set.
[ good ] found the player at /usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[OUCH!!] no libxine.pc on this machine.
         This means that xine-lib is either not installed
         or it is installed in a very unusual place.
         So you should probably install xine-lib before running xine-check...
         press <enter> to continue...

[ hint ] unable to determine plugin directory
         I could not determine your plugin directory. That would be much easier
         if you had libxine.pc installed (see message above)...
         Note that I could not check your xine plugins.
         press <enter> to continue...                                                                                         
                                                                                                                              
[ good ] /dev/cdrom points to /dev/sr1                                                                                        
[ good ] /dev/dvd points to /dev/sr1                                                                                          
[ hint ] Your DVD drive seems not to be attached via ATAPI.                                                                   
         This might be due to the use of an ide-scsi emulation.                                                               
         If you really have a SCSI DVD drive, your SCSI controller is likely                                                  
         to do perfect DMA, so there's no reason to worry about this.                                                         
         However, if you're using ide-scsi, there is a chance that DMA is                                                     
         disabled for the DVD drive. Moreover, I don't know how to enable                                                     
         DMA in that case, so you probably have to live with some performance                                                 
         loss. (FIXME: check for /proc/ide, provide solution)                                                                 
         press <enter> to continue...                                                                                         
                                                                                                                              
[ good ] found xvinfo: X-Video Extension version 2.2                                                                          
[ good ] your Xv extension supports YV12 overlays (improves MPEG performance)                                                 
[ good ] your Xv extension supports YUY2 overlays
[ good ] Xv ports:  YV12 I420 YV12 I420 YUY2 YV12 UYVY I42

Was aber ist libxine.pc?

per YAST kann ich es nicht finden?

lg

Rudi
 
OP
V

Valsi

Hacker
Hallo,

nach Google Recherche habe ich das dev Paket von xine installiert und die Fehlermeldung bei xine-check ist nun weg:

Code:
rudolf@linux-7ewy:~> xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.6.34.7-0.7-default)
[ good ] intel compatible processor, checking MTRR support
[ good ] you have MTRR support and there are some ranges set.
[ good ] found the player at /usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[ good ] plugin directory /usr/lib/xine/plugins/1.29 exists.
[ good ] found unknown plugin: xineplug_flac.so
[ good ] found unknown plugin: xineplug_vdr.so
[ good ] found input plugins
[ good ] found demux plugins
[ good ] found decoder plugins
[ good ] found video_out plugins
[ good ] found audio_out plugins
[ good ] skin directory /usr/share/xine/skins exists.
[ good ] found logo in /usr/share/xine/skins
[ good ] I even found some skins.
[ good ] /dev/cdrom points to /dev/sr1
[ good ] /dev/dvd points to /dev/sr1
[ hint ] Your DVD drive seems not to be attached via ATAPI.
         This might be due to the use of an ide-scsi emulation.
         If you really have a SCSI DVD drive, your SCSI controller is likely
         to do perfect DMA, so there's no reason to worry about this.
         However, if you're using ide-scsi, there is a chance that DMA is
         disabled for the DVD drive. Moreover, I don't know how to enable
         DMA in that case, so you probably have to live with some performance
         loss. (FIXME: check for /proc/ide, provide solution)
         press <enter> to continue...

[ good ] found xvinfo: X-Video Extension version 2.2
[ good ] your Xv extension supports YV12 overlays (improves MPEG performance)
[ good ] your Xv extension supports YUY2 overlays
[ good ] Xv ports:  YV12 I420 YV12 I420 YUY2 YV12 UYVY I420

Auch habe ich unter .kde4/share jeweils unter Config und Apps die Daten von Kaffeine entfernt.

Geändert hat sich aber im Verhalten nichts.

Code:
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/Diana Krall - Narrow Daylight.mp4
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/Diana Krall-Narrow Daylight.mp4
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf":
        Datei oder Verzeichnis nicht gefunden
params.c:OpenConfFile() - Unable to open configuration file "/home/rudolf/.smb/smb.conf.append":
        Datei oder Verzeichnis nicht gefunden
rudolf@linux-7ewy:~> kaffeine /home/rudolf/Desktop/Diana Krall-Narrow Daylight.mp4
rudolf@linux-7ewy:~> received X error event: BadMatch (invalid parameter attributes)
X Error: BadMatch (invalid parameter attributes) 8
  Extension:    132 (Uknown extension)
  Minor opcode: 17 (Unknown request)
  Resource id:  0x3f
KCrash: Application 'kaffeine-xbu' crashing...
sock_file=/home/rudolf/.kde4/socket-linux-7ewy/kdeinit4__0
abort: audio_alsa_out.c:853: ao_alsa_write: Aborting.
Unable to start Dr. Konqi

Ich bin doch etwas ratlos...

lg

Rudi
 

wirrwarr

Hacker
Hallo Valsi
Code:
Warnung: Konfigurationseintrag media.capture.save_dir verweist auf die nicht-existente Stelle
Warnung: Konfigurationseintrag media.dvb.channels_conf verweist auf die nicht-existente Stelle /home/rudolf/.xine/channels.conf
Warnung: Konfigurationseintrag media.video4linux.radio_device verweist auf die nicht-existente Stelle /dev/radio0
Warnung: Konfigurationseintrag media.video4linux.video_device verweist auf die nicht-existente Stelle /dev/video0
Warnung: Konfigurationseintrag media.wintv_pvr.device verweist auf die nicht-existente Stelle /dev/video0
Kannst Du mal schauen ob die als fehlend bemängelten Dateien da sind oder nicht?

Gruß wirrwarr
 
Oben