[gelöst] Kein Sound nach Update auf 11.3

Grasshopper · 20 Juli 2010

Hallo, nach Update von 11.2 auf 11.3 via Zypper hat sich die Soundkarte verabschiedet. Folgende Meldung kommt bei dem Versuch, die Karte per Yast einzurichten:
"Das Kernelmodul snd-hda-intel für die soundunterstützung konnte nicht geladen werden. Ein möglicher Grund dafür können falsche Modulparamater sein, sowie ungültige IO- oder IRQ Parameter.
Die Suche über Google brachte keine Ergebnisse."
Hat da jemand ne Idee?

Suse 11.3 Linux 2.6.34-12-desktop; KDE 4.4.93
welche Angaben werden evtl. noch gebraucht.

Vielen Dank im Voraus.

Frank

Rainer Juhser · 20 Juli 2010

Zeig mal die Ausgabe von

Code:

/usr/sbin/hwinfo --sound

Grasshopper · 20 Juli 2010

Hallo,
das sieht dann so aus:

Code:

frank@linux-zur0:~>     /usr/sbin/hwinfo --sound
14: PCI 1b.0: 0403 Audio device                                 
  [Created at pci.318]
  Unique ID: u1Nb.NtSFsKFmVj3
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel 82801I (ICH9 Family) HD Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller"
  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
  SubDevice: pci 0x7502 
  Revision: 0x02
  Memory Range: 0xfdff4000-0xfdff7fff (rw,non-prefetchable)
  IRQ: 22 (no events)
  Module Alias: "pci:v00008086d0000293Esv00001462sd00007502bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
frank@linux-zur0:~>

lOtz1009 · 20 Juli 2010

Füge da bitte noch http://www.cogitavi.de/?p=288 hinzu.

Grasshopper · 20 Juli 2010

Hallo,
hier die benötigten Infos:

Code:

linux-zur0:/home/frank # cat /etc/*release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
openSUSE 11.3 (x86_64)
VERSION = 11.3
linux-zur0:/home/frank #

Code:

linux-zur0:/home/frank # kwin --version
Qt: 4.7.0
KDE: 4.4.93 (KDE 4.4.93 (KDE 4.5 >= 20100713))
KWin: 4.4.93 (KDE 4.4.93 (KDE 4.5 >= 20100713))
linux-zur0:/home/frank #

Code:

inux-zur0:/home/frank # uname -a
Linux linux-zur0 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux
linux-zur0:/home/frank #

Code:

linux-zur0:/home/frank # /sbin/lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
linux-zur0:/home/frank #

Code:

linux-zur0:/home/frank # usr/sbin/hwinfo --sound
bash: usr/sbin/hwinfo: Datei oder Verzeichnis nicht gefunden
linux-zur0:/home/frank

Code:

linux-zur0:/home/frank # head -1 /proc/asound/card0/codec*
head: „/proc/asound/card0/codec*“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden
linux-zur0:/home/frank #

Code:

linux-zur0:/home/frank # lsmod | grep -i snd
snd_pcm_oss            50414  0 
snd_mixer_oss          16959  1 snd_pcm_oss
snd_seq                66291  0 
snd_hda_intel          27527  0 
snd_hda_codec         110948  1 snd_hda_intel
snd_usb_audio         112428  2 
snd_usbmidi_lib        22771  1 snd_usb_audio
snd_hwdep               7676  2 snd_hda_codec,snd_usb_audio
snd_rawmidi            25714  1 snd_usbmidi_lib
snd_seq_device          7706  2 snd_seq,snd_rawmidi
snd_pcm               102078  4 snd_pcm_oss,snd_hda_intel,snd_hda_codec,snd_usb_audio
snd_timer              24882  2 snd_seq,snd_pcm
snd                    85063  16 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_usbmidi_lib,snd_hwdep,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
soundcore               9003  1 snd
snd_page_alloc          9524  2 snd_hda_intel,snd_pcm
linux-zur0:/home/frank #

Code:

linux-zur0:/home/frank # zypper se -si alsa
Daten des Repositorys laden ...
Installierte Pakete lesen ...

S | Name                     | Typ   | Version                          | Arch   | Repository                                                                          
--+--------------------------+-------+----------------------------------+--------+-------------------------------------------------------------------------------------
i | alsa                     | Paket | 1.0.23-62.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-devel               | Paket | 1.0.23-62.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-docs                | Paket | 1.0.23-62.1                      | noarch | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-driver-kmp-default  | Paket | 1.0.23.20100720_k2.6.34.0_12-2.1 | x86_64 | http://download.opensuse.org/repositories/multimedia:/audio:/KMP/openSUSE_11.3/     
i | alsa-driver-kmp-desktop  | Paket | 1.0.23.20100720_k2.6.34.0_12-2.1 | x86_64 | http://download.opensuse.org/repositories/multimedia:/audio:/KMP/openSUSE_11.3/     
i | alsa-firmware            | Paket | 1.0.23-8.1                       | noarch | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-oss                 | Paket | 1.0.17.git20080715-2.1           | x86_64 | http://download.opensuse.org/repositories/multimedia:/audio:/snapshot/openSUSE_11.3/
i | alsa-oss-32bit           | Paket | 1.0.17.git20080715-2.1           | x86_64 | http://download.opensuse.org/repositories/multimedia:/audio:/snapshot/openSUSE_11.3/
i | alsa-plugins             | Paket | 1.0.23-28.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-plugins-32bit       | Paket | 1.0.23-28.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-plugins-pulse       | Paket | 1.0.23-28.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-plugins-pulse-32bit | Paket | 1.0.23-28.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-tools               | Paket | 1.0.23-9.1                       | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-tools-gui           | Paket | 1.0.23-9.1                       | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsa-utils               | Paket | 1.0.23-20.1                      | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | alsamixergui             | Paket | 0.9.0rc1-746.1                   | x86_64 | Haupt-Repository (OSS)                                                              
i | pyalsa                   | Paket | 1.0.22-4.1                       | x86_64 | http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3/           
i | python-alsaaudio         | Paket | 0.5-0.pm.2.1                     | x86_64 | (Systempakete)

Code:

linux-zur0:/home/frank # cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23-git20100720.
Compiled on Jul 19 2010 for kernel 2.6.34-12-desktop (SMP).
linux-zur0:/home/frank #

Code:

inux-zur0:/home/frank # cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23-git20100720.
Compiled on Jul 19 2010 for kernel 2.6.34-12-desktop (SMP).
linux-zur0:/home/frank # cat /etc/modprobe.d/*sound*


options snd slots=snd-hda-intel
# u1Nb.NtSFsKFmVj3:82801I (ICH9 Family) HD Audio Controller
alias snd-card-0 snd-hda-intel
linux-zur0:/home/frank #

lOtz1009 · 20 Juli 2010

Sieht soweit eigentlich ok aus.
Probier mal /etc/init.d/alsasound restart (als User in einem Terminal).

Ansonsten leg mal einen neuen User an und logg dich mit dem ein.

Grasshopper · 20 Juli 2010

Hallo,
neuer User bringt leider nix. Auch als root lässt sich die Karte nicht konfigurieren.

Das bringt /etc/init.d/alsasound restart

Code:

shutting down sound driver
FATAL: Error removing snd (/lib/modules/2.6.34-12-desktop/updates/alsa/acore/snd.ko): Operation not permitted

Die Ausgabe des Befehls ist übrigens ziemlich lang. Sehr lang. Es wird immer der gleiche Kram ausgeworfen, aber unendlich oft.

Grasshopper · 20 Juli 2010

Ach ja. Ich weiß nicht, ob das relevant ist.
Nicht nur unter KDE, auch unter LXDE das gleiche Spielchen. Soundkarte wird grundsätzlich irgendwie erkannt, aber nicht konfiguriert.
Gruß Frank

lOtz1009 · 20 Juli 2010

Hast du's mal ohne die extra Multimedia-Pakete probiert?

Grasshopper · 20 Juli 2010

Hallo,

welche hast Du da konkret im Sinn.
Wenn ich bei den Systemeinstellungen umstelle auf "Signalton statt Systemeinstellungen" verwende, kommt wenigstens ein zartes Pieps.
Frank

lOtz1009 · 20 Juli 2010

http://download.opensuse.org/repositories/multimedia:/libs/openSUSE_11.3
http://download.opensuse.org/repositories/multimedia:/audio:/KMP/openSUSE_11.3/

Die beiden Repos mal deaktivieren und die Pakete daraus wieder umstellen.
ODer hast du die beiden Repos aus einem besonderen Grund aufgenommen?

Grasshopper · 20 Juli 2010

Hallo, hab die beiden Repos mal rausgenommen und per zypper das System aktualisiert. Alles unverändert.
Die Repos sind noch aus Suse 11.2. Da hat der Sound mal gehakt (das problem war aber ein anderes - damals wurde die Karte erkannt und eingerichtet, gab aber keinen Mucks, jetzt wird sie nicht einmal eingerichtet) und mithilfe dieser beiden Repos kam ich seinerzeit weiter.
Aber, wie gesagt, auch nach Deaktivierung und Aktualisierung des Systems keine Änderung.

lOtz1009 · 20 Juli 2010

Hast du danach neu gestartet?

Grasshopper · 20 Juli 2010

Leider brachte auch ein Neustart nicht den gewünschten Erfolg. Gibt es eine Möglichkeit, die Karte komplett aus Yast zu entfernen um sie dann neu einlesen zu lassen?

lOtz1009 · 20 Juli 2010

Probier ersatzweise mal alsaconf in einem Root-Terminal.

Grasshopper · 20 Juli 2010

Das Ergebnis: no legacy driver available.
Yast lässt sich auch nach init 3 nicht überreden, an der karte rumzuschrauben.

Anonymous · 20 Juli 2010

Zeil doch mal bitte /var/log/boot.msg

Grasshopper · 20 Juli 2010

Hi, hier die gewünschte Info:

Code:

klogd 1.4.1, log source = ksyslog started.
<5>[    0.000000] Linux version 2.6.34-12-desktop (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP PREEMPT 2010-06-29 02:39:08 +0200
<6>[    0.000000] Command line: root=/dev/disk/by-id/ata-ST3500320NS_9QM02SXG-part2 resume=/dev/disk/by-id/ata-ST3500320NS_9QM02SXG-part7 splash=silent quiet vga=0x31a
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
<6>[    0.000000]  BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
<6>[    0.000000]  BIOS-e820: 000000007fe90000 - 000000007fee3000 (ACPI NVS)
<6>[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
<6>[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] DMI 2.5 present.
<5>[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
<7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] last_pfn = 0x7fe90 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-CCFFF write-protect
<7>[    0.000000]   CD000-FFFFF write-through
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000 mask F80000000 write-back
<7>[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
<7>[    0.000000]   2 disabled
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>[    0.000000] Scanning 0 areas for low memory corruption
<6>[    0.000000] modified physical RAM map:
<6>[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
<6>[    0.000000]  modified: 0000000000010000 - 000000000009e400 (usable)
<6>[    0.000000]  modified: 000000000009e400 - 00000000000a0000 (reserved)
<6>[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
<6>[    0.000000]  modified: 0000000000100000 - 000000007fe90000 (usable)
<6>[    0.000000]  modified: 000000007fe90000 - 000000007fee3000 (ACPI NVS)
<6>[    0.000000]  modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
<6>[    0.000000]  modified: 000000007fef0000 - 000000007ff00000 (reserved)
<6>[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
<7>[    0.000000] initial memory mapped : 0 - 20000000
<6>[    0.000000] found SMP MP-table at [ffff8800000f3ce0] f3ce0
<6>[    0.000000] init_memory_mapping: 0000000000000000-000000007fe90000
<7>[    0.000000]  0000000000 - 007fe00000 page 2M
<7>[    0.000000]  007fe00000 - 007fe90000 page 4k
<7>[    0.000000] kernel direct mapping tables up to 7fe90000 @ 16000-1a000
<6>[    0.000000] RAMDISK: 3760e000 - 37ff0000
<4>[    0.000000] ACPI: RSDP 00000000000f7f50 00014 (v00 MEDION)
<4>[    0.000000] ACPI: RSDT 000000007fee3000 0003C (v01 MEDION MEDIONAG 42302E31 AWRD 00000000)
<4>[    0.000000] ACPI: FACP 000000007fee3080 00074 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000)
<4>[    0.000000] ACPI: DSDT 000000007fee3100 0490A (v01 MEDION AWRDACPI 00001000 MSFT 03000000)
<4>[    0.000000] ACPI: FACS 000000007fe90000 00040
<4>[    0.000000] ACPI: HPET 000000007fee7c80 00038 (v01 MEDION MEDIONAG 42302E31 AWRD 00000098)
<4>[    0.000000] ACPI: MCFG 000000007fee7cc0 0003C (v01 MEDION MEDIONAG 42302E31 AWRD 00000000)
<4>[    0.000000] ACPI: SLIC 000000007fee7a40 00176 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000)
<4>[    0.000000] ACPI: APIC 000000007fee7bc0 00084 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000)
<4>[    0.000000] ACPI: SSDT 000000007fee8360 00380 (v01  PmRef    CpuPm 00003000 INTL 20041203)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] No NUMA configuration found
<6>[    0.000000] Faking a node at 0000000000000000-000000007fe90000
<6>[    0.000000] Initmem setup node 0 0000000000000000-000000007fe90000
<6>[    0.000000]   NODE_DATA [0000000001d96100 - 0000000001daa0ff]
<7>[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   DMA      0x00000010 -> 0x00001000
<4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
<4>[    0.000000]   Normal   empty
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] early_node_map[2] active PFN ranges
<4>[    0.000000]     0: 0x00000010 -> 0x0000009e
<4>[    0.000000]     0: 0x00000100 -> 0x0007fe90
<7>[    0.000000] On node 0 totalpages: 523806
<7>[    0.000000]   DMA zone: 56 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 3926 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 7107 pages used for memmap
<7>[    0.000000]   DMA32 zone: 512717 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
<6>[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ2 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
<7>[    0.000000] nr_irqs_gsi: 24
<7>[    0.000000] early_res array is doubled to 64 at [18180 - 1897f]
<6>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
<6>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>[    0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
<6>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001e00000 s84136 r8192 d22360 u524288
<6>[    0.000000] pcpu-alloc: s84136 r8192 d22360 u524288 alloc=1*2097152
<6>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
<4>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516643
<4>[    0.000000] Policy zone: DMA32
<5>[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST3500320NS_9QM02SXG-part2 resume=/dev/disk/by-id/ata-ST3500320NS_9QM02SXG-part7 splash=silent quiet vga=0x31a
<6>[    0.000000] bootsplash: silent mode.
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.000000] Checking aperture...
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] Subtract (48 early reservations)
<6>[    0.000000]   #1 [0001000000 - 0001d95fb8]   TEXT DATA BSS
<6>[    0.000000]   #2 [003760e000 - 0037ff0000]         RAMDISK
<6>[    0.000000]   #3 [0001d96000 - 0001d960ca]             BRK
<6>[    0.000000]   #4 [00000f3cf0 - 0000100000]   BIOS reserved
<6>[    0.000000]   #5 [00000f3ce0 - 00000f3cf0]    MP-table mpf
<6>[    0.000000]   #6 [000009e400 - 00000f20d4]   BIOS reserved
<6>[    0.000000]   #7 [00000f2240 - 00000f3ce0]   BIOS reserved
<6>[    0.000000]   #8 [00000f20d4 - 00000f2240]    MP-table mpc
<6>[    0.000000]   #9 [0000010000 - 0000012000]      TRAMPOLINE
<6>[    0.000000]   #10 [0000012000 - 0000016000]     ACPI WAKEUP
<6>[    0.000000]   #11 [0000016000 - 0000018000]         PGTABLE
<6>[    0.000000]   #12 [0001d96100 - 0001daa100]       NODE_DATA
<6>[    0.000000]   #13 [0001daa100 - 0001dab100]         BOOTMEM
<6>[    0.000000]   #14 [0000018000 - 0000018180]         BOOTMEM
<6>[    0.000000]   #15 [00025ac000 - 00025ad000]         BOOTMEM
<6>[    0.000000]   #16 [00025ad000 - 00025ae000]         BOOTMEM
<6>[    0.000000]   #17 [0002600000 - 0004200000]        MEMMAP 0
<6>[    0.000000]   #18 [0001dab100 - 0001dc3100]         BOOTMEM
<6>[    0.000000]   #19 [0001dc3100 - 0001ddb100]         BOOTMEM
<6>[    0.000000]   #20 [0001ddc000 - 0001ddd000]         BOOTMEM
<6>[    0.000000]   #21 [0001ddb100 - 0001ddb141]         BOOTMEM
<6>[    0.000000]   #22 [0001ddb180 - 0001ddb1c3]         BOOTMEM
<6>[    0.000000]   #23 [0001ddb200 - 0001ddb430]         BOOTMEM
<6>[    0.000000]   #24 [0001ddb440 - 0001ddb4a8]         BOOTMEM
<6>[    0.000000]   #25 [0001ddb4c0 - 0001ddb528]         BOOTMEM
<6>[    0.000000]   #26 [0001ddb540 - 0001ddb5a8]         BOOTMEM
<6>[    0.000000]   #27 [0001ddb5c0 - 0001ddb628]         BOOTMEM
<6>[    0.000000]   #28 [0001ddb640 - 0001ddb6a8]         BOOTMEM
<6>[    0.000000]   #29 [0001ddb6c0 - 0001ddb728]         BOOTMEM
<6>[    0.000000]   #30 [0001ddb740 - 0001ddb7a8]         BOOTMEM
<6>[    0.000000]   #31 [0001ddb7c0 - 0001ddb828]         BOOTMEM
<6>[    0.000000]   #32 [0001ddb840 - 0001ddb8a8]         BOOTMEM
<6>[    0.000000]   #33 [0001d95fc0 - 0001d95fe0]         BOOTMEM
<6>[    0.000000]   #34 [0001ddb8c0 - 0001ddb948]         BOOTMEM
<6>[    0.000000]   #35 [0001ddb980 - 0001ddba08]         BOOTMEM
<6>[    0.000000]   #36 [0001e00000 - 0001e1c000]         BOOTMEM
<6>[    0.000000]   #37 [0001e80000 - 0001e9c000]         BOOTMEM
<6>[    0.000000]   #38 [0001f00000 - 0001f1c000]         BOOTMEM
<6>[    0.000000]   #39 [0001f80000 - 0001f9c000]         BOOTMEM
<6>[    0.000000]   #40 [0001ddba40 - 0001ddba48]         BOOTMEM
<6>[    0.000000]   #41 [0001ddba80 - 0001ddba88]         BOOTMEM
<6>[    0.000000]   #42 [0001ddbac0 - 0001ddbad0]         BOOTMEM
<6>[    0.000000]   #43 [0001ddbb00 - 0001ddbb20]         BOOTMEM
<6>[    0.000000]   #44 [0001ddbb40 - 0001ddbc70]         BOOTMEM
<6>[    0.000000]   #45 [0001ddbc80 - 0001ddbcd0]         BOOTMEM
<6>[    0.000000]   #46 [0001ddbd00 - 0001ddbd50]         BOOTMEM
<6>[    0.000000]   #47 [0001ddd000 - 0001de5000]         BOOTMEM
<6>[    0.000000] Memory: 2041712k/2095680k available (4775k kernel code, 456k absent, 53512k reserved, 6607k data, 896k init)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:33024 nr_irqs:440
<4>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<7>[    0.000000] hpet clockevent registered
<4>[    0.000000] Fast TSC calibration using PIT
<4>[    0.000000] Detected 2660.233 MHz processor.
<6>[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.46 BogoMIPS (lpj=2660233)
<4>[    0.001092] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>[    0.002085] Security Framework initialized
<6>[    0.002106] AppArmor: AppArmor initialized
<6>[    0.002258] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[    0.003330] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>[    0.003837] Mount-cache hash table entries: 256
<6>[    0.003981] CPU: Physical Processor ID: 0
<6>[    0.003982] CPU: Processor Core ID: 0
<6>[    0.003985] mce: CPU supports 6 MCE banks
<6>[    0.004006] CPU0: Thermal monitoring enabled (TM2)
<6>[    0.004010] using mwait in idle threads.
<6>[    0.004012] Performance Events: Core2 events, Intel PMU driver.
<6>[    0.004016] ... version:                2
<6>[    0.004017] ... bit width:              40
<6>[    0.004018] ... generic registers:      2
<6>[    0.004020] ... value mask:             000000ffffffffff
<6>[    0.004021] ... max period:             000000007fffffff
<6>[    0.004022] ... fixed-purpose events:   3
<6>[    0.004023] ... event mask:             0000000700000003
<6>[    0.004097] Unpacking initramfs...
<6>[    0.152324] Freeing initrd memory: 10120k freed
<6>[    0.155579] ACPI: Core revision 20100121
<6>[    0.165007] Setting APIC routing to flat
<6>[    0.165314] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.175322] CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
<6>[    0.181029] Booting Node   0, Processors  #1
<6>[    0.253019] Brought up 2 CPUs
<6>[    0.253019] Total of 2 processors activated (10640.45 BogoMIPS).
<6>[    0.255048] devtmpfs: initialized
<6>[    0.256399] regulator: core version 0.5
<6>[    0.256399] regulator: dummy: 
<4>[    0.256399] Time: 20:06:34  Date: 07/20/10
<6>[    0.256399] NET: Registered protocol family 16
<6>[    0.256399] ACPI: bus type pci registered
<6>[    0.256399] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
<6>[    0.256399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
<6>[    0.286682] PCI: Using configuration type 1 for base access
<4>[    0.288095] bio: create slab <bio-0> at 0
<7>[    0.291027] ACPI: EC: Look up EC in DSDT
<4>[    0.296048] ACPI: SSDT 000000007fee7d40 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
<4>[    0.296494] ACPI: SSDT 000000007fee8200 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
<6>[    0.296769] ACPI: Interpreter enabled
<6>[    0.296773] ACPI: (supports S0 S3 S4 S5)
<6>[    0.296792] ACPI: Using IOAPIC for interrupt routing
<6>[    0.302251] ACPI: No dock devices found.
<6>[    0.302253] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
<6>[    0.302347] ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>[    0.302530] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
<7>[    0.302532] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
<7>[    0.302534] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
<7>[    0.302536] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
<7>[    0.302538] pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
<7>[    0.302594] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<7>[    0.302597] pci 0000:00:01.0: PME# disabled
<7>[    0.302641] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
<7>[    0.302646] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
<7>[    0.302650] pci 0000:00:19.0: reg 18: [io  0xff00-0xff1f]
<7>[    0.302681] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
<7>[    0.302684] pci 0000:00:19.0: PME# disabled
<7>[    0.302723] pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
<7>[    0.302776] pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
<7>[    0.302829] pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
<7>[    0.302881] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
<7>[    0.302926] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
<7>[    0.302929] pci 0000:00:1a.7: PME# disabled
<7>[    0.302957] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
<7>[    0.302991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<7>[    0.302994] pci 0000:00:1b.0: PME# disabled
<7>[    0.303038] pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
<7>[    0.303091] pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
<7>[    0.303144] pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
<7>[    0.303197] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
<7>[    0.303242] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<7>[    0.303245] pci 0000:00:1d.7: PME# disabled
<6>[    0.303341] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
<6>[    0.303344] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
<6>[    0.303347] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
<6>[    0.303350] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f)
<7>[    0.303395] pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
<7>[    0.303400] pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
<7>[    0.303404] pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
<7>[    0.303408] pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
<7>[    0.303413] pci 0000:00:1f.2: reg 20: [io  0xf400-0xf41f]
<7>[    0.303417] pci 0000:00:1f.2: reg 24: [mem 0xfdffc000-0xfdffc7ff]
<7>[    0.303441] pci 0000:00:1f.2: PME# supported from D3hot
<7>[    0.303444] pci 0000:00:1f.2: PME# disabled
<7>[    0.303466] pci 0000:00:1f.3: reg 10: [mem 0xfdffb000-0xfdffb0ff 64bit]
<7>[    0.303477] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
<7>[    0.303525] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
<7>[    0.303532] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
<7>[    0.303539] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
<7>[    0.303543] pci 0000:01:00.0: reg 24: [io  0xdf00-0xdf7f]
<7>[    0.303548] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<6>[    0.303584] pci 0000:00:01.0: PCI bridge to [bus 01-01]
<7>[    0.303586] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
<7>[    0.303588] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
<7>[    0.303592] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
<7>[    0.303629] pci 0000:02:01.0: reg 10: [mem 0xfddff000-0xfddff7ff]
<7>[    0.303668] pci 0000:02:01.0: supports D1 D2
<7>[    0.303693] pci 0000:02:02.0: reg 10: [mem 0xfddfe000-0xfddfe7ff]
<7>[    0.303699] pci 0000:02:02.0: reg 14: [io  0xcf00-0xcf7f]
<7>[    0.303736] pci 0000:02:02.0: supports D2
<7>[    0.303737] pci 0000:02:02.0: PME# supported from D2 D3hot D3cold
<7>[    0.303740] pci 0000:02:02.0: PME# disabled
<6>[    0.303777] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
<7>[    0.303780] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
<7>[    0.303783] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
<7>[    0.303787] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
<7>[    0.303789] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
<7>[    0.303791] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
<7>[    0.303801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[    0.303952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<6>[    0.318899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<6>[    0.318995] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<6>[    0.319094] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>[    0.319187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>[    0.319281] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<6>[    0.319374] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<6>[    0.319468] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
<6>[    0.319561] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<6>[    0.319671] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.319674] vgaarb: loaded
<6>[    0.319696] usbcore: registered new interface driver usbfs
<6>[    0.319709] usbcore: registered new interface driver hub
<6>[    0.319720] usbcore: registered new device driver usb
<6>[    0.319720] PCI: Using ACPI for IRQ routing
<7>[    0.319720] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.319720] reserve RAM buffer: 000000000009e400 - 000000000009ffff 
<7>[    0.319720] reserve RAM buffer: 000000007fe90000 - 000000007fffffff 
<6>[    0.319720] NetLabel: Initializing
<6>[    0.319720] NetLabel:  domain hash size = 128
<6>[    0.319720] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.319720] NetLabel:  unlabeled traffic allowed by default
<6>[    0.319720] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
<6>[    0.319720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
<6>[    0.319720] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
<6>[    0.323020] Switching to clocksource tsc
<6>[    0.326151] AppArmor: AppArmor Filesystem Enabled
<6>[    0.326159] pnp: PnP ACPI init
<6>[    0.326165] ACPI: bus type pnp registered
<6>[    0.328527] pnp: PnP ACPI: found 14 devices
<6>[    0.328529] ACPI: ACPI bus type pnp unregistered
<6>[    0.328536] system 00:01: [io  0x04d0-0x04d1] has been reserved
<6>[    0.328538] system 00:01: [io  0x0800-0x087f] has been reserved
<6>[    0.328541] system 00:01: [io  0x0880-0x088f] has been reserved
<6>[    0.328546] system 00:0a: [io  0x0400-0x04bf] could not be reserved
<6>[    0.328551] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
<6>[    0.328556] system 00:0d: [mem 0x000f0000-0x000fffff] could not be reserved
<6>[    0.328558] system 00:0d: [mem 0x7ff00000-0x7fffffff] could not be reserved
<6>[    0.328560] system 00:0d: [mem 0xfed00000-0xfed000ff] has been reserved
<6>[    0.328562] system 00:0d: [mem 0x7fe90000-0x7fefffff] could not be reserved
<6>[    0.328564] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
<6>[    0.328566] system 00:0d: [mem 0x00100000-0x7fe8ffff] could not be reserved
<6>[    0.328568] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[    0.328571] system 00:0d: [mem 0xfed14000-0xfed1dfff] has been reserved
<6>[    0.328573] system 00:0d: [mem 0xfed20000-0xfed9ffff] has been reserved
<6>[    0.328575] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
<6>[    0.328578] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
<6>[    0.328580] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
<6>[    0.328582] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
<6>[    0.334557] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
<6>[    0.334560] pci 0000:00:01.0: PCI bridge to [bus 01-01]
<6>[    0.334562] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
<6>[    0.334565] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
<6>[    0.334568] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
<6>[    0.334571] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
<6>[    0.334573] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
<6>[    0.334577] pci 0000:00:1e.0:   bridge window [mem 0xfdd00000-0xfddfffff]
<6>[    0.334580] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
<7>[    0.334588]   alloc irq_desc for 16 on node -1
<7>[    0.334590]   alloc kstat_irqs on node -1
<6>[    0.334594] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>[    0.334597] pci 0000:00:01.0: setting latency timer to 64
<7>[    0.334602] pci 0000:00:1e.0: setting latency timer to 64
<7>[    0.334605] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
<7>[    0.334607] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
<7>[    0.334609] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
<7>[    0.334610] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
<7>[    0.334612] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
<7>[    0.334614] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
<7>[    0.334616] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
<7>[    0.334617] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
<7>[    0.334619] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
<7>[    0.334621] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffffffffffff]
<6>[    0.334663] NET: Registered protocol family 2
<6>[    0.334751] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.335288] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
<6>[    0.336710] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[    0.337227] TCP: Hash tables configured (established 262144 bind 65536)
<6>[    0.337229] TCP reno registered
<6>[    0.337234] UDP hash table entries: 1024 (order: 3, 32768 bytes)
<6>[    0.337257] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
<6>[    0.337411] NET: Registered protocol family 1
<7>[    0.337553] pci 0000:01:00.0: Boot video device
<7>[    0.337560] PCI: CLS 64 bytes, default 64
<6>[    0.337845] Scanning for low memory corruption every 60 seconds
<6>[    0.337972] audit: initializing netlink socket (disabled)
<5>[    0.337982] type=2000 audit(1279656394.337:1): initialized
<6>[    0.347897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[    0.350135] VFS: Disk quotas dquot_6.5.2
<4>[    0.350157] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    0.350278] msgmni has been set to 1001
<6>[    0.352082] alg: No test for stdrng (krng)
<6>[    0.352110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    0.352113] io scheduler noop registered
<6>[    0.352115] io scheduler deadline registered
<6>[    0.352132] io scheduler cfq registered (default)
<7>[    0.352271] pcieport 0000:00:01.0: setting latency timer to 64
<7>[    0.352290]   alloc irq_desc for 24 on node -1
<7>[    0.352292]   alloc kstat_irqs on node -1
<7>[    0.352300] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
<6>[    0.352349] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
<6>[    0.352360] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
<4>[    0.352364] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
<4>[    0.352384] pci-stub: invalid id string ""
<6>[    0.353141] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010980000, using 5120k, total 14336k
<6>[    0.353143] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>[    0.353144] vesafb: scrolling: redraw
<6>[    0.353146] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[    0.353378] bootsplash 3.1.6-2004/03/31: looking for picture...
<6>[    0.353380] bootsplash: silentjpeg size 189087 bytes
<6>[    0.368304] bootsplash: ...found (1280x1024, 95355 bytes, v3).
<4>[    0.415961] Console: switching to colour frame buffer device 156x60
<6>[    0.463217] fb0: VESA VGA frame buffer device
<6>[    0.464412] Non-volatile memory driver v1.3
<6>[    0.464414] Linux agpgart interface v0.103
<6>[    0.464437] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[    0.464523] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    0.464605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    0.464895] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    0.465005] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    0.465127] Fixed MDIO Bus: probed
<6>[    0.465132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[    0.465153]   alloc irq_desc for 18 on node -1
<7>[    0.465155]   alloc kstat_irqs on node -1
<6>[    0.465163] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>[    0.465172] ehci_hcd 0000:00:1a.7: setting latency timer to 64
<6>[    0.465175] ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>[    0.465196] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>[    0.465221] ehci_hcd 0000:00:1a.7: debug port 1
<7>[    0.469112] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
<6>[    0.469129] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
<6>[    0.479106] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
<6>[    0.479140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.479142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.479145] usb usb1: Product: EHCI Host Controller
<6>[    0.479147] usb usb1: Manufacturer: Linux 2.6.34-12-desktop ehci_hcd
<6>[    0.479149] usb usb1: SerialNumber: 0000:00:1a.7
<6>[    0.479233] hub 1-0:1.0: USB hub found
<6>[    0.479237] hub 1-0:1.0: 6 ports detected
<7>[    0.479292]   alloc irq_desc for 23 on node -1
<7>[    0.479293]   alloc kstat_irqs on node -1
<6>[    0.479296] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>[    0.479304] ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>[    0.479306] ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>[    0.479312] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>[    0.479333] ehci_hcd 0000:00:1d.7: debug port 1
<7>[    0.483210] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
<6>[    0.483220] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
<6>[    0.493165] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[    0.493185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    0.493188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.493190] usb usb2: Product: EHCI Host Controller
<6>[    0.493192] usb usb2: Manufacturer: Linux 2.6.34-12-desktop ehci_hcd
<6>[    0.493194] usb usb2: SerialNumber: 0000:00:1d.7
<6>[    0.493270] hub 2-0:1.0: USB hub found
<6>[    0.493274] hub 2-0:1.0: 6 ports detected
<6>[    0.493325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    0.493335] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    0.493375] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>[    0.493380] uhci_hcd 0000:00:1a.0: setting latency timer to 64
<6>[    0.493382] uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>[    0.493388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>[    0.493414] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
<6>[    0.493439] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.493440] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.493442] usb usb3: Product: UHCI Host Controller
<6>[    0.493443] usb usb3: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.493445] usb usb3: SerialNumber: 0000:00:1a.0
<6>[    0.493505] hub 3-0:1.0: USB hub found
<6>[    0.493508] hub 3-0:1.0: 2 ports detected
<7>[    0.493551]   alloc irq_desc for 21 on node -1
<7>[    0.493552]   alloc kstat_irqs on node -1
<6>[    0.493555] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<7>[    0.493560] uhci_hcd 0000:00:1a.1: setting latency timer to 64
<6>[    0.493562] uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>[    0.493567] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>[    0.493593] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
<6>[    0.493619] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.493621] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.493623] usb usb4: Product: UHCI Host Controller
<6>[    0.493624] usb usb4: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.493625] usb usb4: SerialNumber: 0000:00:1a.1
<6>[    0.493684] hub 4-0:1.0: USB hub found
<6>[    0.493687] hub 4-0:1.0: 2 ports detected
<7>[    0.493730]   alloc irq_desc for 19 on node -1
<7>[    0.493731]   alloc kstat_irqs on node -1
<6>[    0.493734] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
<7>[    0.493739] uhci_hcd 0000:00:1a.2: setting latency timer to 64
<6>[    0.493741] uhci_hcd 0000:00:1a.2: UHCI Host Controller
<6>[    0.493746] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
<6>[    0.493772] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
<6>[    0.493799] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.493800] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.493802] usb usb5: Product: UHCI Host Controller
<6>[    0.493803] usb usb5: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.493805] usb usb5: SerialNumber: 0000:00:1a.2
<6>[    0.493862] hub 5-0:1.0: USB hub found
<6>[    0.493865] hub 5-0:1.0: 2 ports detected
<6>[    0.493907] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>[    0.493912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>[    0.493914] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[    0.493922] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
<6>[    0.493941] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
<6>[    0.493969] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.493970] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.493972] usb usb6: Product: UHCI Host Controller
<6>[    0.493973] usb usb6: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.493975] usb usb6: SerialNumber: 0000:00:1d.0
<6>[    0.494035] hub 6-0:1.0: USB hub found
<6>[    0.494038] hub 6-0:1.0: 2 ports detected
<6>[    0.494082] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>[    0.494087] uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>[    0.494089] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[    0.494095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
<6>[    0.494114] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
<6>[    0.494138] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.494140] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.494142] usb usb7: Product: UHCI Host Controller
<6>[    0.494143] usb usb7: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.494144] usb usb7: SerialNumber: 0000:00:1d.1
<6>[    0.494206] hub 7-0:1.0: USB hub found
<6>[    0.494209] hub 7-0:1.0: 2 ports detected
<6>[    0.494251] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>[    0.494255] uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>[    0.494257] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[    0.494262] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
<6>[    0.494282] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
<6>[    0.494306] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
<6>[    0.494308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.494310] usb usb8: Product: UHCI Host Controller
<6>[    0.494311] usb usb8: Manufacturer: Linux 2.6.34-12-desktop uhci_hcd
<6>[    0.494312] usb usb8: SerialNumber: 0000:00:1d.2
<6>[    0.494370] hub 8-0:1.0: USB hub found
<6>[    0.494373] hub 8-0:1.0: 2 ports detected
<6>[    0.494443] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[    0.494444] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[    0.495069] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    0.495115] mice: PS/2 mouse device common for all mice
<6>[    0.495195] rtc_cmos 00:04: RTC can wake from S4
<6>[    0.495223] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>[    0.495244] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
<6>[    0.495253] cpuidle: using governor ladder
<6>[    0.495254] cpuidle: using governor menu
<6>[    0.495443] usbcore: registered new interface driver hiddev
<6>[    0.495453] usbcore: registered new interface driver usbhid
<6>[    0.495454] usbhid: USB HID core driver
<6>[    0.514452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>[    0.557861] TCP cubic registered
<6>[    0.557903] NET: Registered protocol family 10
<6>[    0.558164] lo: Disabled Privacy Extensions
<6>[    0.558313] lib80211: common routines for IEEE802.11 drivers
<7>[    0.558315] lib80211_crypt: registered algorithm 'NULL'
<7>[    0.558375] PM: Checking image partition /dev/disk/by-id/ata-ST3500320NS_9QM02SXG-part7
<7>[    0.558378] PM: Resume from disk failed.
<4>[    0.558389] registered taskstats version 1
<4>[    0.558558]   Magic number: 2:695:144
<6>[    0.558584] acpi device:15: hash matches
<6>[    0.558615] rtc_cmos 00:04: setting system clock to 2010-07-20 20:06:34 UTC (1279656394)
<6>[    0.558689] Freeing unused kernel memory: 896k freed
<6>[    0.558897] Write protecting the kernel read-only data: 10240k
<6>[    0.559040] Freeing unused kernel memory: 1352k freed
<6>[    0.559422] Freeing unused kernel memory: 636k freed
<6>[    0.581168] thermal LNXTHERM:01: registered as thermal_zone0
<6>[    0.581175] ACPI: Thermal Zone [THRM] (22 C)
<6>[    0.586179] ACPI: Fan [FAN] (on)
<6>[    0.589608] udev: starting version 157
<5>[    0.661802] SCSI subsystem initialized
<7>[    0.673101] libata version 3.00 loaded.
<7>[    0.675710] ahci 0000:00:1f.2: version 3.0
<6>[    0.675725] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
<7>[    0.675754]   alloc irq_desc for 25 on node -1
<7>[    0.675755]   alloc kstat_irqs on node -1
<7>[    0.675765] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
<6>[    0.675793] ahci: SSS flag set, parallel bus scan disabled
<6>[    0.675820] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
<6>[    0.675822] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs 
<7>[    0.675826] ahci 0000:00:1f.2: setting latency timer to 64
<6>[    0.685213] scsi0 : ahci
<6>[    0.685315] scsi1 : ahci
<6>[    0.685368] scsi2 : ahci
<6>[    0.685406] scsi3 : ahci
<6>[    0.685446] scsi4 : ahci
<6>[    0.685484] scsi5 : ahci
<6>[    0.685637] ata1: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc100 irq 25
<6>[    0.685639] ata2: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc180 irq 25
<6>[    0.685641] ata3: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc200 irq 25
<6>[    0.685643] ata4: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc280 irq 25
<6>[    0.685645] ata5: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc300 irq 25
<6>[    0.685647] ata6: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc380 irq 25
<6>[    0.782241] usb 1-1: new high speed USB device using ehci_hcd and address 2
<6>[    0.986130] usb 1-1: New USB device found, idVendor=0424, idProduct=2228
<6>[    0.986133] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    0.986136] usb 1-1: Product: Flash Card Reader
<6>[    0.986138] usb 1-1: Manufacturer: Generic
<6>[    0.986140] usb 1-1: SerialNumber: 000022272228
<6>[    1.085076] usb 1-5: new high speed USB device using ehci_hcd and address 3
<6>[    1.143027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    1.144208] ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
<6>[    1.144211] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>[    1.145792] ata1.00: configured for UDMA/133
<5>[    1.156112] scsi 0:0:0:0: Direct-Access     ATA      ST3500320NS      SN04 PQ: 0 ANSI: 5
<6>[    1.218235] usb 1-5: New USB device found, idVendor=13d3, idProduct=3247
<6>[    1.218237] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    1.218240] usb 1-5: Product: 802.11 n WLAN
<6>[    1.218242] usb 1-5: Manufacturer: Ralink
<6>[    1.218243] usb 1-5: SerialNumber: 1.0
<6>[    1.372021] usb 2-2: new high speed USB device using ehci_hcd and address 2
<6>[    1.604924] usb 2-2: New USB device found, idVendor=046d, idProduct=09a1
<6>[    1.604927] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
<6>[    1.604929] usb 2-2: SerialNumber: 1190FA20
<6>[    1.862019] usb 5-2: new low speed USB device using uhci_hcd and address 2
<6>[    2.022669] usb 5-2: New USB device found, idVendor=0bc7, idProduct=0006
<6>[    2.022672] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[    2.022674] usb 5-2: Product: RF receiver
<6>[    2.022676] usb 5-2: Manufacturer: X10 WTI
<6>[    2.032149] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    2.035817] ata2.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20N, 1.01, max UDMA/133
<6>[    2.040791] ata2.00: configured for UDMA/133
<5>[    2.169682] scsi 1:0:0:0: CD-ROM            HL-DT-ST BDDVDRW GGC-H20N 1.01 PQ: 0 ANSI: 5
<6>[    2.231072] usb 8-1: new low speed USB device using uhci_hcd and address 2
<6>[    2.394142] usb 8-1: New USB device found, idVendor=045e, idProduct=0083
<6>[    2.394145] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[    2.394147] usb 8-1: Product: Basic Optical Mouse
<6>[    2.394149] usb 8-1: Manufacturer: Microsoft
<6>[    2.410367] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
<6>[    2.410432] generic-usb 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1/input0
<6>[    4.371022] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    4.371566] ata3.00: ATA-8: WDC WD10EACS-22D6B1, 01.01A01, max UDMA/133
<6>[    4.371569] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
<6>[    4.372930] ata3.00: configured for UDMA/133
<5>[    4.383095] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EACS-22D 01.0 PQ: 0 ANSI: 5
<6>[    4.688022] ata4: SATA link down (SStatus 0 SControl 300)
<6>[    5.004022] ata5: SATA link down (SStatus 0 SControl 300)
<6>[    5.320022] ata6: SATA link down (SStatus 0 SControl 300)
<5>[    5.335616] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    5.335654] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[    5.335658] sd 0:0:0:0: [sda] Write Protect is off
<7>[    5.335660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    5.335678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    5.335694] sd 2:0:0:0: [sdb] Write Protect is off
<7>[    5.335696] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    5.335713] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    5.335796]  sda:
<6>[    5.335843]  sdb: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
<5>[    5.407745] sd 0:0:0:0: [sda] Attached SCSI disk
<4>[    5.778107]  sdb1
<5>[    5.778296] sd 2:0:0:0: [sdb] Attached SCSI disk
<7>[    6.195078] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
<7>[    6.195082] PM: Basic memory bitmaps created
<7>[    6.200936] PM: Basic memory bitmaps freed
<6>[    6.307202] PM: Starting manual resume from disk
<7>[    6.307205] PM: Resume from partition 8:7
<7>[    6.307206] PM: Checking hibernation image.
<7>[    6.312150] PM: Error -22 checking image file
<7>[    6.312151] PM: Resume from disk failed.
<6>[    6.456783] EXT4-fs (sda2): mounted filesystem with ordered data mode
<7>[    7.828145] preloadtrace: systemtap: 1.1/0.147, base: ffffffffa018b000, memory: 37data/40text/25ctx/13net/417alloc kb, probes: 44
<6>[    8.897269] udev: starting version 157
<5>[    9.042025] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    9.042075] scsi 1:0:0:0: Attached scsi generic sg1 type 5
<5>[    9.042125] sd 2:0:0:0: Attached scsi generic sg2 type 0
<6>[    9.182473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[    9.182530] ACPI: Power Button [PWRB]
<6>[    9.182614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>[    9.182653] ACPI: Power Button [PWRF]
<4>[    9.198363] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    9.198366] Uniform CD-ROM driver Revision: 3.20
<7>[    9.198439] sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>[    9.364370] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
<6>[    9.364373] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
<7>[    9.364401]   alloc irq_desc for 20 on node -1
<7>[    9.364403]   alloc kstat_irqs on node -1
<6>[    9.364410] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<7>[    9.364431] e1000e 0000:00:19.0: setting latency timer to 64
<7>[    9.364513]   alloc irq_desc for 26 on node -1
<7>[    9.364515]   alloc kstat_irqs on node -1
<7>[    9.364524] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
<6>[    9.365948] input: PC Speaker as /devices/platform/pcspkr/input/input4
<6>[    9.384946] Initializing USB Mass Storage driver...
<6>[    9.385054] scsi6 : usb-storage 1-1:1.0
<6>[    9.385164] usbcore: registered new interface driver usb-storage
<6>[    9.385165] USB Mass Storage support registered.
<6>[    9.396264] cfg80211: Calling CRDA to update world regulatory domain
<6>[    9.398528] iTCO_vendor_support: vendor-support=0
<6>[    9.398648] Linux video capture interface: v2.00
<6>[    9.403108] cfg80211: World regulatory domain updated:
<6>[    9.403111]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    9.403113]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    9.403115]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[    9.403117]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[    9.403119]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    9.403120]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    9.410085] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/input/input5
<6>[    9.410160] usbcore: registered new interface driver ati_remote
<6>[    9.410162] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
<6>[    9.411339] lirc_dev: IR Remote Control driver registered, major 61 
<6>[    9.412153] 
<6>[    9.412154] lirc_atiusb: USB remote driver for LIRC $Revision: 1.86 $
<4>[    9.412155] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
<6>[    9.412180] usbcore: registered new interface driver lirc_atiusb
<4>[    9.418020] ati_remote 5-2:1.0: Unknown input from channel 0x00: data 08,20
<6>[    9.419221] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
<6>[    9.419289] iTCO_wdt: Found a ICH9DH TCO device (Version=2, TCOBASE=0x0460)
<6>[    9.419339] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>[    9.422613] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
<3>[    9.434078] Error: Driver 'pcspkr' is already registered, aborting...
<6>[    9.435941] ohci1394 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
<7>[    9.435947] ohci1394 0000:02:02.0: setting latency timer to 64
<6>[    9.440197] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/input/input6
<6>[    9.440243] usbcore: registered new interface driver uvcvideo
<6>[    9.440244] USB Video Class driver (v0.1.0)
<6>[    9.484457] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:92:2b:f0:f8
<6>[    9.484460] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
<6>[    9.484477] 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: ffffff-0ff
<6>[    9.484515] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
<7>[    9.484580]   alloc irq_desc for 22 on node -1
<7>[    9.484582]   alloc kstat_irqs on node -1
<6>[    9.484589] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
<7>[    9.484739]   alloc irq_desc for 27 on node -1
<7>[    9.484740]   alloc kstat_irqs on node -1
<7>[    9.484749] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X
<7>[    9.484771] HDA Intel 0000:00:1b.0: setting latency timer to 64
<6>[    9.490166] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fddfe000-fddfe7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
<6>[    9.492775] saa7130/34: v4l2 driver version 0.2.15 loaded
<3>[    9.493501] ALSA hda_intel.c:1451: no codecs initialized
<6>[    9.494821] HDA Intel 0000:00:1b.0: PCI INT A disabled
<7>[    9.496467]   alloc irq_desc for 17 on node -1
<7>[    9.496469]   alloc kstat_irqs on node -1
<6>[    9.496476] saa7134 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<6>[    9.496481] saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 17, latency: 84, mmio: 0xfddff000
<6>[    9.496486] saa7133[0]: subsystem: 16be:000d, board: Medion Md8800 Quadro [card=96,autodetected]
<6>[    9.496500] saa7133[0]: board init: gpio is 0
<4>[    9.496507] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[    9.575607] usbcore: registered new interface driver snd-usb-audio
<7>[    9.639212] phy0: Selected rate control algorithm 'minstrel'
<7>[    9.639596] Registered led device: rt2800usb-phy0::radio
<7>[    9.639612] Registered led device: rt2800usb-phy0::assoc
<7>[    9.639622] Registered led device: rt2800usb-phy0::quality
<6>[    9.639897] usbcore: registered new interface driver rt2800usb
<6>[    9.640145] saa7133[0]: i2c eeprom 00: be 16 0d 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
<6>[    9.640152] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
<6>[    9.640159] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 29 02 51 96 2b
<6>[    9.640165] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
<6>[    9.640171] saa7133[0]: i2c eeprom 40: ff 28 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
<6>[    9.640178] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640184] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640190] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640196] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640202] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640209] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640215] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640221] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640227] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640234] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<6>[    9.640240] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<4>[    9.640802] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    9.643762] rtusb init --->
<6>[    9.643804] usbcore: registered new interface driver rt2870
<6>[   10.356200] tuner 1-004b: chip found @ 0x96 (saa7133[0])
<6>[   10.392141] tda829x 1-004b: setting tuner address to 60
<5>[   10.396450] scsi 6:0:0:0: Direct-Access     Generic  Flash HS-CF      5.14 PQ: 0 ANSI: 0
<5>[   10.396587] sd 6:0:0:0: Attached scsi generic sg3 type 0
<5>[   10.399702] scsi 6:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   5.14 PQ: 0 ANSI: 0
<5>[   10.399797] sd 6:0:0:1: Attached scsi generic sg4 type 0
<5>[   10.406950] scsi 6:0:0:2: Direct-Access     Generic  Flash HS-SM      5.14 PQ: 0 ANSI: 0
<5>[   10.407058] sd 6:0:0:2: Attached scsi generic sg5 type 0
<5>[   10.411315] sd 6:0:0:0: [sdc] Attached SCSI removable disk
<5>[   10.473562] sd 6:0:0:2: [sde] Attached SCSI removable disk
<5>[   10.478058] sd 6:0:0:1: [sdd] Attached SCSI removable disk
<6>[   10.484144] tda829x 1-004b: type set to tda8290+75a
<7>[   10.754256] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00013aa872]
<6>[   13.500203] saa7133[0]: registered device video1 [v4l2]
<6>[   13.500224] saa7133[0]: registered device vbi0
<6>[   13.620331] dvb_init() allocating 1 frontend
<6>[   13.641205] DVB: registering new adapter (saa7133[0])
<4>[   13.641209] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
<6>[   13.667140] tda1004x: setting up plls for 48MHz sampling clock
<6>[   15.609019] tda1004x: found firmware revision 26 -- ok
<4>[   15.793142] saa7134_alsa: disagrees about version of symbol snd_ctl_add
<4>[   15.793145] saa7134_alsa: Unknown symbol snd_ctl_add
<4>[   15.793206] saa7134_alsa: disagrees about version of symbol snd_pcm_new
<4>[   15.793207] saa7134_alsa: Unknown symbol snd_pcm_new
<4>[   15.793307] saa7134_alsa: disagrees about version of symbol snd_card_register
<4>[   15.793308] saa7134_alsa: Unknown symbol snd_card_register
<4>[   15.793409] saa7134_alsa: disagrees about version of symbol snd_card_free
<4>[   15.793410] saa7134_alsa: Unknown symbol snd_card_free
<4>[   15.793507] saa7134_alsa: disagrees about version of symbol snd_pcm_stop
<4>[   15.793508] saa7134_alsa: Unknown symbol snd_pcm_stop
<4>[   15.793627] saa7134_alsa: disagrees about version of symbol snd_ctl_new1
<4>[   15.793628] saa7134_alsa: Unknown symbol snd_ctl_new1
<4>[   15.793907] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
<4>[   15.793909] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
<4>[   15.794065] saa7134_alsa: disagrees about version of symbol snd_ctl_notify
<4>[   15.794067] saa7134_alsa: Unknown symbol snd_ctl_notify
<4>[   15.794118] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
<4>[   15.794120] saa7134_alsa: Unknown symbol snd_pcm_set_ops
<4>[   15.794282] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
<4>[   15.794283] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
<4>[   15.794516] saa7134_alsa: disagrees about version of symbol snd_card_create
<4>[   15.794518] saa7134_alsa: Unknown symbol snd_card_create
<4>[   15.794568] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
<4>[   15.794570] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
<4>[   15.794627] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
<4>[   15.794628] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
<6>[   15.876978] Adding 2104476k swap on /dev/sda7.  Priority:-1 extents:1 across:2104476k 
<6>[   17.294907] device-mapper: uevent: version 1.0.3
<6>[   17.295010] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
<6>[   19.248504] loop: module loaded
<6>[   22.966306] EXT4-fs (sda8): mounted filesystem with ordered data mode
<6>[   23.384826] fuse init (API version 7.13)
<6>[   24.289074] kjournald starting.  Commit interval 15 seconds
<6>[   24.289370] EXT3-fs (sdb1): using internal journal
<6>[   24.289375] EXT3-fs (sdb1): mounted filesystem with ordered data mode
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Anonymous · 20 Juli 2010

Da ist das Problem:

Code:

ALSA hda_intel.c:1451: no codecs initialized

Du musst dem Soundtreiber noch den passenden Codec mitteilen...Ich helfe dir dan morgen, muss jetzt weg...

Grasshopper · 20 Juli 2010

Da kommen wir der Lösung ja tatsächlich näher. Dann bis morgen.
Gruß Frank

[gelöst] Kein Sound nach Update auf 11.3

Newbie

Moderator

Newbie

Moderator

Newbie

Moderator

Newbie

Newbie

Moderator

Newbie

Moderator

Newbie

Moderator

Newbie

Moderator

Newbie

Anonymous

Gast

Newbie

Anonymous

Gast

Newbie