Atheros WLAN Problem

oliefert · 10 Juli 2008

[Edit Moderator:]
Abgetrennt von hier:
http://www.linux-club.de/viewtopic.php?f=19&t=95442

Hallo,
ich hab dieses rpm mal runtergeladen und mit yast installiert,

Grothesk schrieb:
Und was willst du mit einem 32bit-Modul bei einem 64bit-Kernel erreichen?
Versuch das mal:
http://www.pc-forum24.de/downloads.php?do=file&id=1325

jedoch kann ich meine Karte über yast nicht konfigurieren,
ich bekomm immer noch dieselbe Meldung wie der Kollege vor mir.

Warum geht das bei mir nicht ?

Grothesk · 10 Juli 2008

Weiß ich auch nicht. Mal in die beiden Links geschaut?

mc_guinness · 11 Juli 2008

Hast du du die anderen Schritte die ich oben beschrieben habe ausgeführt?
Poste doch auch deine Angaben wie ich es oben gemacht habe! Nur mit diesem einzelnen Paket ist ja nicht getan.

Bei mit hat sich gestern aber noch eine weitere Eigentümlich herausgestellt.
Ich hatte ja geschrieben, dass die Karte läuft und ich konnnte auch ohne weiteres in Internet. Als ich nach einer Weile dann den Rechner runterfahren wollte, habe ich gesehen, dass ich erneut keine Verbindung habe.
Beim WLAN Router wird mir zwar innernoch unter ath0 angezeigt mit Schloss und Signalstärke, aber das Häckchen davor ist verschwunden und ich habe keine Verbindung.

Die scheint irgendiwe verloren gegangen zu sein. Werde das mal beobachten. Hatte noch jemand dieses Verhalten.

oliefert · 11 Juli 2008

Ja, ich denke ich hab soweit auch alles so gemacht wie du.
Folgende Packete über den smart installiert:
- madwifi 0.9.4-1@x86_64
- madwifi-kmp-default 0.9.4_2.6.25.5_2-1@x86_64

Da ich nicht genau weiß, was alles in dmesg relevant ist post ich einfach mal alles,
sorry im Voraus, falls es zuviel ist :

Code:

Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE707G32552-part6 resume=/dev/sda5 splash=silent vga=0x314
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff50000 (usable)
 BIOS-e820: 000000007ff50000 - 000000007ff65000 (ACPI data)
 BIOS-e820: 000000007ff65000 - 000000007ff66000 (ACPI NVS)
 BIOS-e820: 000000007ff66000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 524112) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F7CA0, 0024 (r2 ACRSYS)
ACPI: XSDT 7FF5E2B5, 005C (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
ACPI: SLIC 7FF64A4A, 0176 (r1 ACRSYS ACRPRDCT  6040000 LOHR        0)
ACPI: FACP 7FF64BC0, 00F4 (r3 NVIDIA MCP67-M   6040000 PTL_    F4240)
ACPI: DSDT 7FF5E311, 66C5 (r1 NVIDIA    MCP67  6040000 MSFT  3000000)
ACPI: FACS 7FF65FC0, 0040
ACPI: SSDT 7FF64CB4, 0248 (r1 PTLTD  POWERNOW  6040000  LTP        1)
ACPI: MCFG 7FF64EFC, 003C (r1 Nvidia NVDAACPI  6040000 NVDA        0)
ACPI: HPET 7FF64F38, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
ACPI: APIC 7FF64F70, 0068 (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: BOOT 7FF64FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: DMI detected: Acer
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000007ff50000
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 524112) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007ff50000
  NODE_DATA [000000000000c000 - 0000000000013fff]
  bootmap [0000000000014000 -  0000000000023fef] pages 10
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b5bd7] TEXT DATA BSS
early res: 3 [37a87000-37fefdbb] RAMDISK
early res: 4 [9e000-9efff] EBDA
early res: 5 [8000-bfff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      158
    0:      256 ->   524112
On node 0 totalpages: 524014
  DMA zone: 56 pages used for memmap
  DMA zone: 1727 pages reserved
  DMA zone: 2215 pages, LIFO batch:0
  DMA32 zone: 7109 pages used for memmap
  DMA32 zone: 512907 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 47936 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515122
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE707G32552-part6 resume=/dev/sda5 splash=silent vga=0x314
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2200.284 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ 34000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
No AGP bridge found
Memory: 2054640k/2096448k available (2365k kernel code, 41416k reserved, 1920k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 4404.99 BogoMIPS (lpj=8809988)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1037 Objects with 90 Devices 263 Methods 44 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12501624
Detected 12.501 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4400.66 BogoMIPS (lpj=8801320)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 01
AMD C1E detected late. Force timer broadcast.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 4 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.........................................................................................................................................................................
Initialized 44/44 Regions 42/42 Fields 53/54 Buffers 30/46 Packages (1054 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 97 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *10
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
system 00:01: ioport range 0x360-0x361 has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0a: ioport range 0x1000-0x107f has been reserved
system 00:0a: ioport range 0x1080-0x10ff has been reserved
system 00:0a: ioport range 0x1400-0x147f has been reserved
system 00:0a: ioport range 0x1480-0x14ff has been reserved
system 00:0a: ioport range 0x1800-0x187f has been reserved
system 00:0a: ioport range 0x1880-0x18ff has been reserved
system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
system 00:0c: iomem range 0x0-0x0 could not be reserved
system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved
PCI: Bridge: 0000:00:08.0
  IO window: disabled.
  MEM window: 0xf0500000-0xf05fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: 4000-4fff
  MEM window: 0xcc000000-0xceffffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:0c.0
  IO window: 5000-5fff
  MEM window: 0xf0200000-0xf03fffff
  PREFETCH window: 0x00000000f0000000-0x00000000f01fffff
PCI: Bridge: 0000:00:0d.0
  IO window: disabled.
  MEM window: 0xf0400000-0xf04fffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5539k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1215789526.820:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:07.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010980000, using 3750k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 95134 bytes
bootsplash: ...found (800x600, 132866 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1680k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (44 C)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 4348
ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 4348
ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 4348
ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 4348
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
ata5.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33
ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
ata5.00: configured for UDMA/33
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf0886000
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
 sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0887000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xf0889000
usb 1-3: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
usb usb3: SerialNumber: 0000:00:02.1
ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z00O] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889400
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:04.1
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-3: new high speed USB device using ehci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: New USB device found, idVendor=064e, idProduct=a101
usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 3-3: Product: Acer CrystalEye webcam
usb 3-3: Manufacturer: SuYin
usb 3-3: SerialNumber: CN0314-OV03-VA-R02.00.00
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=046d, idProduct=c521
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Receiver
usb 2-1: Manufacturer: Logitech
Linux video capture interface: v2.00
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
ACPI: Power Button (CM) [PWRB]
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usbcore: registered new interface driver hiddev
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input8
input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.1/usb3/3-3/3-3:1.0/input/input9
wlan: 0.9.4
ACPI: Battery Slot [BAT1] (battery present)
ACPI: WMI: Mapper loaded
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input10
input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-1
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r200)
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ath_pci: 0.9.4
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:52:1d:eb
forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:00.0 to 64
wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
ACPI: PCI interrupt for device 0000:05:00.0 disabled
sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xf0500800 irq 11 DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[f0500000-f05007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:00.0 to 64
ath5k_pci 0000:05:00.0: registered as 'phy0'
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f78c5011255]
ath5k phy0: failed to wakeup the MAC Chip
ACPI: PCI interrupt for device 0000:05:00.0 disabled
ath5k_pci: probe of 0000:05:00.0 failed with error -5
Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1215782343.383:2): operation="profile_load" name="/bin/ping" name2="default" pid=1610
type=1505 audit(1215782343.447:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1611
type=1505 audit(1215782343.495:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1619
type=1505 audit(1215782343.527:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1625
type=1505 audit(1215782343.587:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1627
type=1505 audit(1215782343.651:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1639
type=1505 audit(1215782343.703:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1664
type=1505 audit(1215782343.807:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1667
type=1505 audit(1215782343.907:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1676
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x12
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x13
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x14
powernow-k8:    3 : fid 0x8 (1600 MHz), vid 0x15
powernow-k8:    4 : fid 0x0 (800 MHz), vid 0x1e
Clocksource tsc unstable (delta = -167843947 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
printk: 3 messages suppressed.
martian source 255.255.255.255 from 192.168.178.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:15:0c:e8:7e:d2:08:00
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=503 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=483
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=269 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=249
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=503 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=483
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=503 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=483
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=467 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=447
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=29031 DF OPT (94040000) PROTO=2
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9795 PROTO=UDP SPT=1900 DPT=2226 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9796 PROTO=UDP SPT=1900 DPT=18047 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9803 PROTO=UDP SPT=1900 DPT=19987 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9804 PROTO=UDP SPT=1900 DPT=10889 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=29032 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9890 PROTO=UDP SPT=1900 DPT=11428 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1b:38:52:1d:eb:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=192.168.178.23 LEN=349 TOS=0x00 PREC=0x00 TTL=64 ID=9891 PROTO=UDP SPT=1900 DPT=4086 LEN=329
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=29033 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.23 DST=217.72.202.83 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=24552 DF PROTO=TCP SPT=2816 DPT=443 WINDOW=207 RES=0x00 ACK RST URGP=0 OPT (0101080A00004E88DAF46996)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=29034 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.178.23 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:e8:7e:d2:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=29035 DF OPT (94040000) PROTO=2

oliefert · 11 Juli 2008

Ich nochmal,
mir ist gerade aufgefallen, das ich das mit der Blacklist nicht gemacht hab.
Was hat es damit auf sich, und funktioniert das, könnte es daran liegen ?

Grothesk · 11 Juli 2008

Würde es etwas ausmachen die Ausgabe des skripte preiszugeben?
Vorzugsweise auf einem nopaste-Service wie http://phpfi.com

oliefert · 11 Juli 2008

Tut mir Leid, ich versteh nur Bahnhof!

Grothesk schrieb:
Würde es etwas ausmachen die Ausgabe des skripte preiszugeben?
Vorzugsweise auf einem nopaste-Service wie http://phpfi.com

Grothesk · 11 Juli 2008

http://www.linux-club.de/viewtopic.php?f=19&t=93338
http://www.linux-club.de/viewtopic.php?f=19&t=94810

oliefert · 11 Juli 2008

Code:

collectNWData.sh V0.6c
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (1) WLAN access point <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient

==================================================================================================
==================================================================================================
*** uname -a 
Linux olliseus-acer 2.6.25.5-1.1-default #1 SMP 2008-06-07 01:55:22 +0200 x86_64 x86_64 x86_64 GNU/Linux
==================================================================================================
*** cat /etc/SuSE-release 
openSUSE 11.0 (X86-64)
VERSION = 11.0
==================================================================================================
*** cat /etc/resolv.conf | /usr/bin/grep -v "^#" | /usr/bin/grep -v "^$" 
nameserver 192.168.178.1
==================================================================================================
*** cat /etc/hosts | grep -v "^#" | /usr/bin/grep -v "^$" | /usr/bin/grep -v "::" 
127.0.0.1       localhost
127.0.0.2       olliseus-acer.site olliseus-acer
==================================================================================================
*** cat /proc/sys/net/ipv4/ip_forward 
0
==================================================================================================
*** /usr/sbin/iptables -t nat -L 
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
==================================================================================================
*** /sbin/route -n 
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.178.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.178.1   0.0.0.0         UG    0      0        0 eth0
==================================================================================================
*** /sbin/arp -n 
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.178.1            ether   00:15:0C:E8:7E:D2   C                     eth0
==================================================================================================
*** /sbin/ifconfig 
eth0      Link encap:Ethernet  Hardware Adresse 00:1B:38:52:1D:EB  
          inet Adresse:192.168.178.23  Bcast:192.168.178.255  Maske:255.255.255.0
          inet6 Adresse: fe80::21b:38ff:fe52:1deb/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:11989 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7826 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:16097819 (15.3 Mb)  TX bytes:773541 (755.4 Kb)
          Interrupt:251 Basisadresse:0x6000 

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:742 errors:0 dropped:0 overruns:0 frame:0
          TX packets:742 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:114263 (111.5 Kb)  TX bytes:114263 (111.5 Kb)

==================================================================================================
*** /sbin/lspci -nn | /usr/bin/egrep '(Ethernet|Network).*controller' 
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2)
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
==================================================================================================
*** /usr/bin/lsusb 
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 064e:a101 Suyin Corp. HP Pavilion dv9640us WebCam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c521 Logitech, Inc. MX620 Laser Cordless Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==================================================================================================
*** /sbin/lsmod | /usr/bin/sort 
ac                     24328  0 
acer_wmi               30280  0 
af_packet              42624  2 
ahci                   50696  5 
ath5k                 119044  0 
ath_hal               235504  1 ath_pci
ath_pci               118960  0 
battery                33672  0 
binfmt_misc            30220  1 
button                 27040  0 
cdrom                  53416  1 sr_mod
cfg80211               39568  1 mac80211
compat_ioctl32         25984  1 uvcvideo
cpufreq_conservative    26248  0 
cpufreq_powersave      18816  0 
cpufreq_userspace      23556  0 
dm_mod                 88600  0 
dock                   29344  1 libata
edd                    28176  0 
ehci_hcd               56204  0 
ext3                  170768  2 
fan                    23944  0 
ff_memless             23176  1 usbhid
forcedeth              72588  0 
fuse                   72256  5 
hid                    59296  1 usbhid
i2c_core               45344  1 nvidia
ieee1394              122216  1 ohci1394
ip6table_filter        20608  1 
ip6table_mangle        20480  0 
ip6_tables             40720  3 ip6t_LOG,ip6table_mangle,ip6table_filter
ip6t_LOG               23940  7 
ip6t_REJECT            22272  3 
iptable_filter         20736  1 
iptable_mangle         20608  0 
iptable_nat            24976  0 
ip_tables              39056  3 iptable_mangle,iptable_nat,iptable_filter
ipt_LOG                23428  8 
ipt_REJECT             21120  3 
ipv6                  331544  19 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
jbd                    82240  1 ext3
joydev                 30848  0 
k8temp                 23040  0 
led_class              22920  1 acer_wmi
libata                194976  2 pata_amd,ahci
loop                   37508  0 
mac80211              220436  1 ath5k
mbcache                27396  1 ext3
mmc_core               74304  1 sdhci
Module                  Size  Used by
nf_conntrack           91536  6 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_conntrack_ipv4      29576  7 iptable_nat,nf_nat
nf_conntrack_ipv6      36168  4 
nf_conntrack_netbios_ns    19968  0 
nf_nat                 39576  1 iptable_nat
nvidia               8165472  26 
ohci1394               50868  0 
ohci_hcd               42500  0 
pata_amd               33284  0 
powernow_k8            32772  1 
processor              72668  3 powernow_k8,thermal
rtc_cmos               28728  0 
rtc_core               41012  1 rtc_cmos
rtc_lib                20224  1 rtc_core
scsi_mod              194904  4 sg,sr_mod,sd_mod,libata
sdhci                  35980  0 
sd_mod                 47280  6 
sg                     56912  0 
snd                    96248  10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
snd_hda_intel         497452  1 
snd_hwdep              28424  1 snd_hda_intel
snd_mixer_oss          35584  1 snd_pcm_oss
snd_page_alloc         28688  2 snd_hda_intel,snd_pcm
snd_pcm               115208  2 snd_pcm_oss,snd_hda_intel
snd_pcm_oss            68992  0 
snd_seq                83600  0 
snd_seq_device         26516  1 snd_seq
snd_timer              45072  2 snd_seq,snd_pcm
soundcore              26000  1 snd
sr_mod                 35636  0 
thermal                43040  0 
usbcore               188248  5 uvcvideo,usbhid,ehci_hcd,ohci_hcd
usbhid                 65488  0 
uvcvideo               75912  0 
v4l1_compat            29444  2 uvcvideo,videodev
videodev               52096  2 uvcvideo,compat_ioctl32
wlan                  235504  1 ath_pci
wmi                    26048  1 acer_wmi
x_tables               43144  11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
xt_limit               20356  15 
xt_pkttype             18944  3 
xt_state               19712  8 
xt_tcpudp              20480  2 
==================================================================================================
*** catMyConfig 
==================================================================================================
*** cat /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='MCP67 Ethernet'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
==================================================================================================
*** /usr/sbin/iwconfig | /usr/bin/sed "s/\(Encryption key:\)\([^o][^f][^f][^ ]*\)\(.*\)/\1@@ @@@-@@@@-@@@@-@@@@-@@@@-@@@@@@@\3/" 
lo        no wireless extensions.

eth0      no wireless extensions.

==================================================================================================
*** /usr/bin/grep -i radio /var/log/boot.msg | /usr/bin/tail -n 5 
==================================================================================================
*** /usr/bin/grep -i firmware /var/log/messages* | /usr/bin/tail -n 5 
==================================================================================================
*** ls -ls /lib/firmware 
insgesamt 56
4 -rw-r--r-- 1 root root 137  6. Jun 23:59 3CCFEM556.cis
4 -rw-r--r-- 1 root root 134  6. Jun 23:59 3CXEM556.cis
4 -rw-r--r-- 1 root root 109  6. Jun 23:59 COMpad2.cis
4 -rw-r--r-- 1 root root  76  6. Jun 23:59 COMpad4.cis
4 -rw-r--r-- 1 root root 136  6. Jun 23:59 DP83903.cis
4 -rw-r--r-- 1 root root  53  6. Jun 23:59 E-CARD.cis
4 -rw-r--r-- 1 root root 253  6. Jun 23:59 LA-PCM.cis
4 -rw-r--r-- 1 root root 107  6. Jun 23:59 MT5634ZLX.cis
4 -rw-r--r-- 1 root root  54  6. Jun 23:59 NE2K.cis
4 -rw-r--r-- 1 root root 210  6. Jun 23:59 PCMLM28.cis
4 -rw-r--r-- 1 root root  68  6. Jun 23:59 PE-200.cis
4 -rw-r--r-- 1 root root  74  6. Jun 23:59 PE520.cis
4 -rw-r--r-- 1 root root  86  6. Jun 23:59 RS-COM-2P.cis
4 -rw-r--r-- 1 root root  85  6. Jun 23:59 tamarack.cis
==================================================================================================
*** ps aux | /usr/bin/grep wpa_supplicant | /usr/bin/grep -v grep 
root      2475  0.0  0.0  16600  1448 ?        S    16:02   0:00 /usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
==================================================================================================
*** /usr/bin/grep NETWORKMANAGER /etc/sysconfig/network/config | /usr/bin/grep -v "^#" 
NETWORKMANAGER="yes"
==================================================================================================
*** /usr/bin/grep -i persistent /etc/sysconfig/network/config | /usr/bin/grep -v "^#" | /usr/bin/grep -v "^$" 
==================================================================================================
*** /usr/bin/egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/70-persistent-net* | /usr/bin/grep -v ":#" | grep -v ":$" 
/usr/bin/egrep: /etc/udev/rules.d/*net_persistent*: Datei oder Verzeichnis nicht gefunden
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1b:38:52:1d:eb", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================
*** /usr/bin/egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|/usr/bin/egrep -v '#|blacklist' 
/etc/modprobe.conf:install eth0             /bin/true
/etc/modprobe.conf:install eth1             /bin/true
==================================================================================================
*** detectFirmwareMessages 
No firmware messages found
==================================================================================================
*** detectAPs

Grothesk · 11 Juli 2008

Sollte eigentlich genau nach diesm Thread funktionieren:
http://www.linux-club.de/viewtopic.php?f=19&t=94810
Neustart! nicht vergessen. Muss man mal machen nach der Aktion.

oliefert · 11 Juli 2008

Bei dem Kollege scheint es doch auch nicht zu funktionieren.

Ich hab jetzt mal den ndiswrapper ausprobiert. Jedoch bleibt bei mir das Modul in den Yasteinstellungen nicht stehn.
Er schmeißt jedes mal den Modulnamen "ndiswrapper" raus.

Grothesk · 11 Juli 2008

Bei dem 'Kollegen' funktioniert das doch.

oliefert · 11 Juli 2008

Sorry, hab die zweite Seite nicht gesehn.
Was für eine schwere Geburt, aber ich habs jetzt auch hinbekommen. Immer wieder ein Erlebnis.

Danke für deine Geduld, einen schönen Abend, wünsche ich.

Atheros WLAN Problem

oliefert

Member

Grothesk

Ultimate Guru

mc_guinness

Newbie

oliefert

Member

oliefert

Member

Grothesk

Ultimate Guru

oliefert

Member

Grothesk

Ultimate Guru

oliefert

Member

Grothesk

Ultimate Guru

oliefert

Member

Grothesk

Ultimate Guru

oliefert

Member