• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Atheros 5213 SUSE 11.0

F

fhihu

Member
Guten Tag

Ich beziehe mich in meinem Posting auf diese zwei anderen Threads

http://www.linux-club.de/viewtopic.php?f=19&t=94923
Leider keine richtig gut verwertbare Information.

http://www.linux-club.de/viewtopic.php?f=19&t=94825
Hab ich gemacht, funktioniert aber nicht erwartungsgemäß.

Hab die Zeile unten eingefügt, aber anstelle dass es geht wird der Adapter nicht mehr erkannt.

Hier hab ich alle Angaben

Code: 
collectNWData.sh V0.5.2.14
--- Welche Netzwerktopologie liegt vor?
--- (2) DSL HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient

!!! CND0230W: IPV6 ist eingeschaltet. Details auf http://www.linux-tips-and-tricks.de/CND0230W
==================================================================================================
==================================================================================================
*** uname -a 
Linux linux-7397 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 athlon i386 GNU/Linux
==================================================================================================
*** cat /etc/SuSE-release 
openSUSE 11.0 (i586)
VERSION = 11.0
==================================================================================================
*** cat /etc/resolv.conf | grep -v "^#" | grep -v "^$" 
nameserver 192.168.0.1
==================================================================================================
*** cat /etc/hosts | grep -v "^#" | grep -v "^$" | grep -v "::" 
127.0.0.1       localhost
127.0.0.2       linux-7397.site linux-7397
==================================================================================================
*** cat /proc/sys/net/ipv4/ip_forward 
0
==================================================================================================
*** /usr/sbin/iptables -t nat -L 
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
==================================================================================================
*** /sbin/route -n 
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 eth0
==================================================================================================
*** /sbin/arp -n 
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.0.1              ether   00:13:46:05:72:97   C                     eth0
==================================================================================================
*** /sbin/ifconfig 
eth0      Link encap:Ethernet  Hardware Adresse 00:1F:C6:A3:0D:AB  
          inet Adresse:192.168.0.101  Bcast:192.168.0.255  Maske:255.255.255.0
          inet6 Adresse: fe80::21f:c6ff:fea3:dab/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3036 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2231 errors:0 dropped:0 overruns:0 carrier:2
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:3834396 (3.6 Mb)  TX bytes:229242 (223.8 Kb)

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:118 errors:0 dropped:0 overruns:0 frame:0
          TX packets:118 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:7132 (6.9 Kb)  TX bytes:7132 (6.9 Kb)

wlan0     Link encap:Ethernet  Hardware Adresse 00:0F:B5:87:0D:70  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wmaster0  Link encap:UNSPEC  Hardware Adresse 00-0F-B5-87-0D-70-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

==================================================================================================
*** pingTests 
192.168.0.101 : Ping OK
127.0.0.1 : Ping OK
195.135.220.3 : Ping OK
www.suse.de : Ping OK
==================================================================================================
*** /sbin/lspci -nn 
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204]
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8500 GT [10de:0421] (rev a1)
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0)
03:05.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
03:07.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
==================================================================================================
*** /usr/bin/lsusb 
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==================================================================================================
*** /sbin/lsmod | /usr/bin/sort 
af_packet              38656  4 
agpgart                50868  1 ati_agp
ahci                   45960  3 
arc4                   18432  2 
ath5k                 109572  0 
ati_agp                25484  0 
atl1                   50316  0 
binfmt_misc            28040  1 
button                 25360  0 
cdrom                  50588  2 sr_mod,ide_cd_mod
cfg80211               35592  1 mac80211
crypto_blkcipher       36356  1 ecb
dm_mod                 78676  0 
dock                   27536  1 libata
ecb                    20096  2 
edd                    26440  0 
ehci_hcd               52492  0 
ext3                  155784  2 
fan                    22660  0 
fuse                   66332  1 
gameport               31500  1 snd_cmipci
i2c_core               41108  1 i2c_piix4
i2c_piix4              25484  0 
ide_cd_mod             51460  0 
ide_core              131104  2 ide_disk,ide_cd_mod
ide_disk               31616  0 
ip6table_filter        19712  0 
ip6_tables             31376  1 ip6table_filter
iptable_filter         19840  0 
iptable_nat            23688  0 
ip_tables              30224  2 iptable_nat,iptable_filter
ipv6                  281064  18 
jbd                    73376  1 ext3
joydev                 28224  0 
libata                176220  2 ahci,pata_atiixp
loop                   35332  0 
mac80211              190484  1 ath5k
mbcache                25348  1 ext3
mii                    21888  1 atl1
Module                  Size  Used by
nf_conntrack           79188  3 iptable_nat,nf_nat,nf_conntrack_ipv4
nf_conntrack_ipv4      27652  3 iptable_nat,nf_nat
nf_nat                 35736  1 iptable_nat
ohci_hcd               39940  0 
pata_atiixp            24320  0 
processor              67504  1 thermal
rtc_cmos               27168  0 
rtc_core               37148  1 rtc_cmos
rtc_lib                19328  1 rtc_core
scsi_mod              168308  5 st,sr_mod,sg,sd_mod,libata
sd_mod                 45208  4 
sg                     52020  0 
snd                    79544  16 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_opl3_synth,snd_seq_midi_emul,snd_seq,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
snd_cmipci             54660  1 
snd_hwdep              26372  1 snd_opl3_lib
snd_mixer_oss          33408  1 snd_pcm_oss
snd_mpu401_uart        25472  1 snd_cmipci
snd_opl3_lib           28672  2 snd_opl3_synth,snd_cmipci
snd_opl3_synth         30852  0 
snd_page_alloc         27400  1 snd_pcm
snd_pcm               100100  2 snd_pcm_oss,snd_cmipci
snd_pcm_oss            64256  0 
snd_rawmidi            42496  2 snd_seq_midi,snd_mpu401_uart
snd_seq                73664  4 snd_seq_midi,snd_seq_midi_event,snd_opl3_synth,snd_seq_midi_emul
snd_seq_device         25100  5 snd_seq_midi,snd_opl3_synth,snd_seq,snd_opl3_lib,snd_rawmidi
snd_seq_midi           26112  0 
snd_seq_midi_emul      22784  1 snd_opl3_synth
snd_seq_midi_event     23936  1 snd_seq_midi
snd_timer              40712  3 snd_seq,snd_pcm,snd_opl3_lib
soundcore              24264  1 snd
sr_mod                 33320  0 
st                     53660  0 
thermal                39452  0 
usbcore               164684  3 ehci_hcd,ohci_hcd
x_tables               33668  3 iptable_nat,ip_tables,ip6_tables
==================================================================================================
*** /usr/sbin/iptables -L -vn 
Chain INPUT (policy ACCEPT 3099 packets, 3799K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 2251 packets, 195K bytes)
 pkts bytes target     prot opt in     out     source               destination         
==================================================================================================
*** cat /etc/sysconfig/SuSEfirewall2 | grep -v "^#" | grep -v "^$" 
FW_DEV_EXT="any"
FW_DEV_INT=""
FW_DEV_DMZ=""
FW_ROUTE="no"
FW_MASQUERADE="no"
FW_MASQ_DEV="zone:ext"
FW_MASQ_NETS="0/0"
FW_NOMASQ_NETS=""
FW_PROTECT_FROM_INT="no"
FW_SERVICES_EXT_TCP=""
FW_SERVICES_EXT_UDP=""
FW_SERVICES_EXT_IP=""
FW_SERVICES_EXT_RPC=""
FW_CONFIGURATIONS_EXT=""
FW_SERVICES_DMZ_TCP=""
FW_SERVICES_DMZ_UDP=""
FW_SERVICES_DMZ_IP=""
FW_SERVICES_DMZ_RPC=""
FW_CONFIGURATIONS_DMZ=""
FW_SERVICES_INT_TCP=""
FW_SERVICES_INT_UDP=""
FW_SERVICES_INT_IP=""
FW_SERVICES_INT_RPC=""
FW_CONFIGURATIONS_INT=""
FW_SERVICES_DROP_EXT=""
FW_SERVICES_DROP_DMZ=""
FW_SERVICES_DROP_INT=""
FW_SERVICES_REJECT_EXT=""
FW_SERVICES_REJECT_DMZ=""
FW_SERVICES_REJECT_INT=""
FW_SERVICES_ACCEPT_EXT=""
FW_SERVICES_ACCEPT_DMZ=""
FW_SERVICES_ACCEPT_INT=""
FW_SERVICES_ACCEPT_RELATED_EXT=""
FW_SERVICES_ACCEPT_RELATED_DMZ=""
FW_SERVICES_ACCEPT_RELATED_INT=""
FW_TRUSTED_NETS=""
FW_ALLOW_INCOMING_HIGHPORTS_TCP=""
FW_ALLOW_INCOMING_HIGHPORTS_UDP=""
FW_FORWARD=""
FW_FORWARD_REJECT=""
FW_FORWARD_DROP=""
FW_FORWARD_MASQ=""
FW_REDIRECT=""
FW_LOG_DROP_CRIT="yes"
FW_LOG_DROP_ALL="no"
FW_LOG_ACCEPT_CRIT="yes"
FW_LOG_ACCEPT_ALL="no"
FW_LOG_LIMIT=""
FW_LOG=""
FW_KERNEL_SECURITY="yes"
FW_STOP_KEEP_ROUTING_STATE="no"
FW_ALLOW_PING_FW="yes"
FW_ALLOW_PING_DMZ="no"
FW_ALLOW_PING_EXT="no"
FW_ALLOW_FW_SOURCEQUENCH=""
FW_ALLOW_FW_BROADCAST_EXT="no"
FW_ALLOW_FW_BROADCAST_INT="no"
FW_ALLOW_FW_BROADCAST_DMZ="no"
FW_IGNORE_FW_BROADCAST_EXT="yes"
FW_IGNORE_FW_BROADCAST_INT="no"
FW_IGNORE_FW_BROADCAST_DMZ="no"
FW_ALLOW_CLASS_ROUTING=""
FW_CUSTOMRULES=""
FW_REJECT=""
FW_REJECT_INT="yes"
FW_HTB_TUNE_DEV=""
FW_IPv6=""
FW_IPv6_REJECT_OUTGOING=""
FW_IPSEC_TRUST="no"
FW_ZONES=""
FW_USE_IPTABLES_BATCH=""
FW_LOAD_MODULES="nf_conntrack_netbios_ns"
FW_FORWARD_ALWAYS_INOUT_DEV=""
FW_FORWARD_ALLOW_BRIDGING=""
==================================================================================================
*** cat /etc/sysconfig/network/config | grep -v "^#" | grep -v "^$" 
DEFAULT_BROADCAST="+"
GLOBAL_POST_UP_EXEC="yes"
GLOBAL_PRE_DOWN_EXEC="yes"
CHECK_DUPLICATE_IP="no"
DEBUG="no"
USE_SYSLOG="yes"
MODIFY_RESOLV_CONF_DYNAMICALLY="yes"
MODIFY_NAMED_CONF_DYNAMICALLY="no"
MODIFY_RESOLV_CONF_STATIC_DNS=""
CONNECTION_SHOW_WHEN_IFSTATUS="no"
CONNECTION_CHECK_BEFORE_IFDOWN="no"
CONNECTION_CLOSE_BEFORE_IFDOWN="no"
CONNECTION_UMOUNT_NFS_BEFORE_IFDOWN="no"
CONNECTION_SEND_KILL_SIGNAL="no"
MANDATORY_DEVICES=""
WAIT_FOR_INTERFACES="20"
FIREWALL="yes"
LINKLOCAL_INTERFACES="eth*[0-9]|tr*[0-9]|wlan[0-9]|ath[0-9]"
IFPLUGD_OPTIONS="-f -I -b"
NETWORKMANAGER="yes"
NM_ONLINE_TIMEOUT="0"
==================================================================================================
*** cat /etc/sysconfig/sysctl | grep -v "^#" | grep -v "^$" 
IP_DYNIP="no"
IP_TCP_SYNCOOKIES="yes"
IP_FORWARD="no"
IPV6_FORWARD="no"
IPV6_PRIVACY=no
IPV6_MLD_VERSION=""
DISABLE_ECN="yes"
DMAPI_PROBE="no"
ENABLE_SYSRQ="176"
==================================================================================================
*** cat /etc/sysconfig/network/dhcp | grep -v "^#" | grep -v "^$" 
DHCLIENT_BIN=""
DHCLIENT_DEBUG="no"
DHCLIENT_SET_HOSTNAME="yes"
DHCLIENT_MODIFY_RESOLV_CONF="yes"
DHCLIENT_SET_DEFAULT_ROUTE="yes"
DHCLIENT_MODIFY_NTP_CONF="no"
DHCLIENT_MODIFY_NIS_CONF="yes"
DHCLIENT_SET_DOMAINNAME="yes"
DHCLIENT_KEEP_SEARCHLIST="yes"
DHCLIENT_LEASE_TIME=""
DHCLIENT_TIMEOUT="999999"
DHCLIENT_HOSTNAME_OPTION="AUTO"
DHCLIENT_CLIENT_ID=""
DHCLIENT_VENDOR_CLASS_ID=""
DHCLIENT_RELEASE_BEFORE_QUIT="no"
DHCLIENT_SCRIPT_EXE=""
DHCLIENT_ADDITIONAL_OPTIONS=""
DHCLIENT_SLEEP="0"
DHCLIENT_WAIT_AT_BOOT="15"
WRITE_HOSTNAME_TO_HOSTS="yes"
DHCLIENT_MODIFY_SMB_CONF="yes"
==================================================================================================
*** cat /etc/sysconfig/proxy | grep -v "^#" | grep -v "^$" 
PROXY_ENABLED="no"
HTTP_PROXY=""
HTTPS_PROXY=""
FTP_PROXY=""
GOPHER_PROXY=""
NO_PROXY="localhost, 127.0.0.1"
==================================================================================================
*** cat /etc/sysconfig/ssh | grep -v "^#" | grep -v "^$" 
SSHD_OPTS=""
==================================================================================================
*** catMyConfig 
==================================================================================================
*** cat /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='L1 Gigabit Ethernet Adapter'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='yes'
==================================================================================================
*** cat /etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
IPADDR_2=127.0.0.2/8
STARTMODE=onboot
USERCONTROL=no
FIREWALL=no
==================================================================================================
*** cat /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='AR5212/AR5213 Multiprotocol MAC/baseband processor'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP=''
WIRELESS_AUTH_MODE='open'
WIRELESS_BITRATE='auto'
WIRELESS_CA_CERT=''
WIRELESS_CHANNEL=''
WIRELESS_CLIENT_CERT=''
WIRELESS_CLIENT_KEY=''
WIRELESS_CLIENT_KEY_PASSWORD=''
WIRELESS_DEFAULT_KEY='0'
WIRELESS_EAP_AUTH=''
WIRELESS_EAP_MODE=''
WIRELESS_ESSID=''
WIRELESS_FREQUENCY=''
WIRELESS_KEY=''
WIRELESS_KEY_0=''
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_PEAP_VERSION=''
WIRELESS_POWER='yes'
WIRELESS_WPA_ANONID=''
WIRELESS_WPA_IDENTITY=''
WIRELESS_WPA_PASSWORD=''
WIRELESS_WPA_PSK=''
==================================================================================================
*** /usr/sbin/iwconfig | /usr/bin/sed "s/\(Encryption key:\)\([^o][^f][^f][^ ]*\)\(.*\)/\1@@ @@@-@@@@-@@@@-@@@@-@@@@-@@@@@@@\3/" 
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11g  ESSID:""  
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

==================================================================================================
*** /usr/bin/grep -i radio /var/log/boot.msg | /usr/bin/tail -n 5 
==================================================================================================
*** /usr/bin/grep -i firmware /var/log/messages* | /usr/bin/tail -n 5 
==================================================================================================
*** ls -ls /lib/firmware 
insgesamt 0
==================================================================================================
*** ps aux | grep wpa_supplicant | grep -v grep 
root      2164  0.0  0.0   3856  1640 ?        S    10:54   0:00 /usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
==================================================================================================
*** /usr/bin/grep NETWORKMANAGER /etc/sysconfig/network/config | grep -v "^#" 
NETWORKMANAGER="yes"
==================================================================================================
*** /usr/bin/grep -i persistent /etc/sysconfig/network/config | grep -v "^#" | grep -v "^$" 
==================================================================================================
*** /usr/bin/egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* | grep -v ":#" | grep -v ":$" 
/usr/bin/egrep: /etc/udev/rules.d/*net_persistent*: Datei oder Verzeichnis nicht gefunden
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0f:b5:87:0d:70", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1f:c6:a3:0d:ab", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/75-persistent-net-generator.rules:ACTION!="add", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEM!="net", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:NAME=="?*", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:KERNEL!="eth*|ath*|wlan*[0-9]|ra*|sta*|ctc*|lcs*|hsi*", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="xen", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:DRIVERS=="ibmveth", ENV{MATCHADDR}="$attr{address}", ENV{COMMENT}="ibmveth device ($id)"
/etc/udev/rules.d/75-persistent-net-generator.rules:ENV{MATCHADDR}=="", ENV{MATCHID}=="", ENV{INTERFACE_NAME}=="", GOTO="persistent_net_generator_end"
/etc/udev/rules.d/75-persistent-net-generator.rules:DRIVERS=="?*", IMPORT{program}="write_net_rules"
/etc/udev/rules.d/75-persistent-net-generator.rules:LABEL="persistent_net_generator_end"
==================================================================================================
*** /usr/bin/egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|/usr/bin/egrep -v '#|blacklist' 
/etc/modprobe.conf:install eth0             /bin/true
/etc/modprobe.conf:install eth1             /bin/true
==================================================================================================
*** detectFirmwareMessages 
No firmware messages found

Dann hier noch ein parr sonstige Angaben

Code: 
linux-7397:/home/mirta # lspci
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
03:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
03:07.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
linux-7397:/home/mirta # iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11g  ESSID:""
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated
          Tx-Power=27 dBm
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

linux-7397:/home/mirta # iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wmaster0  Interface doesn't support scanning.

wlan0     No scan results

linux-7397:/home/mirta #

und dann noch hier die Textzeile, die ich verändert habe

Code: 
#
# $Id: blacklist 1568 2007-07-12 13:57:29Z zoz $
#
# Listing a module here prevents modprobe from loading it via modalias (only
# aliases from /lib/modules/*/modules.alias). You may still load it explicitely.
# We blacklist some modules becaus they may harm on certain devices or they
# prevent other modules from grabbing the device.
#
# Syntax:  blacklist <driver name>
# See 'man modprobe'.
#

# uhci ... usb-uhci handles the same pci class
blacklist uhci
# usbcore ... module is loaded implicitly, ignore it otherwise
blacklist usbcore

# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
blacklist de4x5
# At least 2.4.3 and later xircom_tulip doesn't have that conflict
# xircom_tulip_cb
blacklist dmfe

# list all framebuffer drivers, some of them tend to crash during boot
# they are either compiled into the kernel, or vesafb is active
# X works fine without them, rcfbset can load them if really required
#  sed -e '/\/drivers\/video\/.*\.\(o\|ko\)$/{s@^.*/@@;s@\..*$@@;p};d'
blacklist aty128fb
blacklist atyfb
blacklist clgenfb
blacklist cyber2000fb
blacklist encode-big5
blacklist encode-gb
blacklist encode-gbk
blacklist encode-jis
blacklist encode-kscm
blacklist fbcon-afb
blacklist fbcon-cfb2
blacklist fbcon-cfb4
blacklist fbcon-hga
blacklist fbcon-ilbm
blacklist fbcon-iplan2p2
blacklist fbcon-iplan2p4
blacklist fbcon-iplan2p8
blacklist fbcon-mac
blacklist fbcon-mfb
blacklist fbcon-vga
blacklist fbcon-vga-planes
blacklist fbgen
blacklist g450_pll
blacklist hgafb
blacklist i2c-matroxfb
blacklist i810fb
blacklist intelfbdrv
blacklist intelfbhw
blacklist matroxfb_accel
blacklist matroxfb_base
blacklist matroxfb_crtc2
blacklist matroxfb_DAC1064
blacklist matroxfb_g450
blacklist matroxfb_maven
blacklist matroxfb_misc
blacklist matroxfb_proc
blacklist matroxfb_Ti3026
blacklist mdacon
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist radeonfb
blacklist rivafb
blacklist sisfb
blacklist sstfb
blacklist tdfxfb
blacklist tridentfb
blacklist unikey
blacklist vga16fb
blacklist vgastate
blacklist vmware
# for kyrofb see Bug 35810
blacklist kyrofb
# list was not complete (bug 106715)
blacklist arcfb
blacklist backlight
blacklist lcd
blacklist cirrusfb
blacklist gx1fb
blacklist intelfb
blacklist macmodes
blacklist nvidiafb
blacklist s1d13xxxfb
blacklist savagefb

# ISDN modules are load from /lib/udev/isdn.sh
blacklist fcusb
blacklist fcusb2
blacklist fxusb
blacklist fxusb_CZ
blacklist fcdslusb
blacklist fcdslusb2
blacklist fcdslusba
blacklist fcdslslusb
blacklist fcdslslusb2
blacklist e2220pc
blacklist e5520pc
blacklist bfusb
blacklist b1isa
blacklist b1pci
blacklist b1pcmcia
blacklist c4
blacklist t1isa
blacklist t1pci
blacklist divas
blacklist act2000
blacklist hfc_usb
blacklist hisax
blacklist hisax_fcpcipnp
blacklist hisax_st5481
blacklist hysdn
blacklist icn
blacklist pcbit
blacklist sc
blacklist tpam
blacklist fcpci
blacklist fcclassic
blacklist fcdsl
blacklist fcdsl2

# OSS PCI sound modules
blacklist ad1889
blacklist ali5455
blacklist btaudio
blacklist cmpci
blacklist cs4281
blacklist emu10k1
blacklist es1370
blacklist es1371
blacklist esssolo1
blacklist forte
blacklist i810_audio
blacklist maestro
blacklist maestro3
blacklist nm256_audio
blacklist opl3sa2                 # Bug 219758
blacklist rme96xx
blacklist sonicvibes
blacklist trident
blacklist via82cxxx_audio
blacklist ymfpci

# If you really need firewire direct networking, then remove this entry
blacklist eth1394

# this is a debugging module which should only be loaded manually
blacklist evbug

# These mtd drivers should be loaded manually.
blacklist scb2_flash
blacklist ich2rom
blacklist pci
blacklist l440gx
blacklist amd76xrom

# job of rcdvb
blacklist snd_bt87x
blacklist snd-bt87x

# HP Touch Screen usb input driver. breaks all other mouse input devices
blacklist tsdev

# The TPM modules are supposed to support the Trusted Platform chip.
# The TPM is connected to the LPC bus, so these modules logically need to
# specify the PCI ID of the LPC interface.
# It's probably a reasonable thing to disable automatic loading of these
# modules, given that we're not doing much with them anyway ATM.
# In the future we may need a bit of more intelligent scanning of devices
# that are connected to busses such as LPC or I2C.
blacklist tpm_infineon
blacklist tpm_nsc
blacklist tpm_atmel

# https://bugzilla.novell.com/show_bug.cgi?id=115132
blacklist slamr
blacklist slusb

# This module seems to be good for nothing. See bug 129301.
blacklist dpt_i2o

# This driver is obsolete and should never be loaded as default.
# See https://bugzilla.novell.com/show_bug.cgi?id=146728
blacklist eepro100

# This driver is obsolete and should never be loaded as default.
# See https://bugzilla.novell.com/show_bug.cgi?id=146930
blacklist sk98lin

# This driver is rarely needed and causes trouble when scanning devices.
# See: https://bugzilla.novell.com/show_bug.cgi?id=144623
blacklist stradis

# These devices have bt878 chip without PCI Subsystem ID. Without that info bttv
# does not know how to treat them properly. Therefore we disable autoloading of
# modules for these devices.
# See https://bugzilla.novell.com/show_bug.cgi?id=149588
# To enable your device create a hardware configuration file for your device.
# See man hwup for details.
# You will probably have to specify an option to identify your card. Have a
# look in /usr/src/linux/Documentation/video4linux/CARDLIST.bttv.
alias pci:v0000109Ed0000036Esv00000000sd00000000bc04sc00i00 bttv_skip_it
alias pci:v0000109Ed00000878sv00000000sd00000000bc04sc80i00 bttv_skip_it
install bttv_skip_it /bin/echo "module alias skipped (bt878 chip without PCI Subsystem ID)"

# For some bridges both intel-agp and i82875p_edac are loaded. If i82875p_edac
# is loaded first it will grab the device. Then intel-agp doesn't work.
# Therefore we disable automatic loading of 82875p_edac. (Bug 213840)
blacklist i82875p_edac
blacklist ath5k

madwifi packet hab ich das default-kernel Paket von der offiziellen Homepage
Der Ping test zum Internet funktioniert übrigens dehalb, weil ich per Lan Kabel mit meinem Router verbunden bin.

Ich hoffe das reicht an Informationen und vielleicht könnte mir bitte jemand kurz auf die Sprünge helfen?

Vielen Dank schon im Vorraus

mfg tbo
 
A

Anonymous

Gast
Ich beziehe mich in meinem Posting auf diese zwei anderen Threads
Zum Vergrößern anklicken....

Macht keinen Sinn, weil das mit deren Problem mit Deinem wenig bis gar nichts zu tun hat.

http://www.pc-forum24.de/beta-forum/9635-suse11rc1-ath5k.html

http://www.pc-forum24.de/suse-treiber/9272-aufruf-zum-test-der-respeced-wlan-pakete.html

madwifi packet hab ich das default-kernel Paket von der offiziellen Homepage
Zum Vergrößern anklicken....

+

Linux linux-7397 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 athlon i386 GNU/Linux
Zum Vergrößern anklicken....

Fällt uns etwas auf?
 
OP
F

fhihu

Member
Stimmt, hab wohl echt den pae Kernel bei mir drauf.

Aber wenn ich über YAST das Kernel-Modul installieren möchte (madwifi-kmp-pae-0.9.4_2.6.25_26-1.i586.rpm ), fehlt die Paketabhängigkeit "kernel(vmlinux) = 1f623d7cfa1b112".

Hab ich den falschen kernel dafür, oder ist das Paket nicht geeignet, da am Schluss 26.1 steht? Hab leider keine Ahnung, sorry.

mfg und vielen Dank

tbo
 
A

Anonymous

Gast
Wieso liest Du nicht _aufmerksam_ die beiden Links durch?

Dein Problem wurde dort (selbe Karte) zweimal gelöst (mit dem "neuen" ath5k-Treiber).

Für Madwifi und 11.0 würde es sogar genügen, sich die letzten paar Threads in diesem Unterforum anzusehen.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben