• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Wlan auf Notebook/Laptop HP 510 konfigurieren

mnzmrk

Newbie
Hallo,
bin Suse 10.3 Neuling.
ich hatte mir bisher alles selbst aus dem Netz gesucht und auch installiert bekommen, hier scheine ich zu scheitern:
Wie bekomme ich das interne Wlan zum Laufen? Hersteller ist Compaq nw 8240 mobiöe Workstation.
Ich kann es scheinbar nicht mal anschalten?In den Yast Netwaro settings taucht die Wlan Karte auf, enable at boot ist eingetragen, aber es passiert nichts.
Kann da jemand helfen ?

Gruß

mnzmrk
 
Vl. waere es nicht schlecht zu erfahren was das genau fuer eine WLan Karte ist? In meinem HP ist z.B.:
Atheros Communications, Inc. AR5212 802.11abg NIC
 
OP
M

mnzmrk

Newbie
Ha, hoppla, ich dachte, was mir Yast anzeigt würde genügen. Also:
11: PCI 204.0: 0282 WLAN controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_4220
Unique ID: JNkJ.9MdF+lEYWg2
Parent ID: 6NW+.InKz0bgid89
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
SysFS BusID: 0000:02:04.0
Hardware Class: network
Model: "Hewlett-Packard Company HP Compaq nw8240 Mobile Workstation"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4220 "PRO/Wireless 2200BG Network Connection"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x12f6 "HP Compaq nw8240 Mobile Workstation"
Revision: 0x05
Driver: "ipw2200"
Driver Modules: "ipw2200"
Device File: eth1
Features: WLAN
Memory Range: 0xd0000000-0xd0000fff (rw,non-prefetchable)
IRQ: 20 (no events)
HW Address: 00:16:6f:c5:90:c6
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Requires: ipw-firmware
Module Alias: "pci:v00008086d00004220sv0000103Csd000012F6bc02sc80i00"
Driver Info #0:
Driver Status: ipw2200 is active
Driver Activation Cmd: "modprobe ipw2200"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #6 (PCI bridge)
Sieht aus wie Intel wireless Pro 2200 ? Oder doch nicht?
Gruß

mnzmrk
 
Oben