• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

umtsmon ... das ewige Problem

schneemie

Newbie
Servus,
ich musste mein Opensuse neu installieren, seitdem ist das Problem wieder da.
Ich habe einmal umtsmon 0.6.9 mit Yast installiert und einmal den ordner umtsmon0.8 entpackt auf dem Desktop.
Wenn ich jetzt umtsmon starten will kommt:
Code:
frank@linux-g254:~> su
Passwort:
linux-g254:/home/frank # umtsmon
umtsmon version 0.6.9 .
installing GUI SIGABRT handler
/dev/ttyUSB3: Datei oder Verzeichnis nicht gefunden
##P1 t=701:  AutoDetectBase::createDevice() failed :-(
Dann habe ich hier im Forum mal nen guten Hinweis gefunden aber da kommt auch nur noch ein:
Code:
frank@linux-g254:~> su
Passwort:
linux-g254:/home/frank # umtsmon --force-autodetect
umtsmon version 0.6.9 .
##P1 t=612: Set force autodetection to true
installing GUI SIGABRT handler
Beides hängt ... kommt nichtmal mehr ein "frank@linux-g254:"

Dann versuche ich mal ein -v5:
Code:
frank@linux-g254:~> umtsmon -v5
umtsmon version 0.6.9 .
##P2 t=720: set verbosity level to 5
installing text SIGABRT handler
##P5 t=720: TheDeviceManagerSingleton::TheDeviceManagerSingleton()
##P3 t=720: TheDeviceManagerSingleton::setupDevice(void)
##P3 t=720: TheDeviceManagerSingleton::readFromConfigFile()
##P5 t=720: TheSettingsSingleton::TheSettingsSingleton()
##P2 t=720: Settings will be saved in : '/home/frank/.umtsmon'
##P3 t=720: Start iterating through all AutoDetectors

##P3 t=720: AutoDetectBase::go() for 'Device creation from supplied parameters'
##P3 t=720:  AutoDetectBase::createDevice() for Device 600a1000
##P3 t=720: Device creation for type 0x600a1000 requested
##P4 t=720:   Dectection claims AT and PPP should be different ports
/dev/ttyUSB3: Datei oder Verzeichnis nicht gefunden
##P2 t=720: BAD: 'Device couldn't be created'
##P1 t=720:  AutoDetectBase::createDevice() failed :-(
##P3 t=720:  Let's continue with the next AutoDetector

##P3 t=720: AutoDetectBase::go() for 'USB Autodetection'
##P3 t=720:  AutoDetect_USB::traverseTrees()
##P4 t=720:   Checking USB device on 005:001
##P3 t=720:  AutoDetect_USB::matchIDs(0x0000, 0x0000)
##P4 t=720:   Checking USB device on 004:002
##P3 t=720:  AutoDetect_USB::matchIDs(0x12d1, 0x1001)
##P2 t=720: GOOD: 'A 'Huawei E620' modem detected'
##P3 t=720:  AutoDetect_USB::findPortNames()
##P4 t=720:   Found serial port number 1 with name 'ttyUSB0'
##P4 t=720:   Found serial port number 2 with name 'ttyUSB1'
##P4 t=720:   Found serial port number 3 with name 'ttyUSB2'
##P3 t=720: INFO: 'There are 3 USB Serial ports available'
##P3 t=720: set AT  serial to '/dev/ttyUSB2'
##P3 t=720: set PPP serial to '/dev/ttyUSB0'
##P3 t=720:  AutoDetectBase::createDevice() for Device 600a1000
##P3 t=720: Device creation for type 0x600a1000 requested
##P4 t=720:   Dectection claims AT and PPP should be different ports
/dev/ttyUSB0: Keine Berechtigung
##P2 t=720: BAD: 'Device couldn't be created'
##P1 t=720:  AutoDetectBase::createDevice() failed :-(
##P3 t=720:  Let's continue with the next AutoDetector

##P3 t=720: AutoDetectBase::go() for 'PCMCIA (PCCard) Autodetection'
##P3 t=720:  AutoDetect_PCMCIA::traverseTrees()
##P3 t=720: INFO: 'pcmcia_core kernel support (yenta) found'
##P3 t=720: INFO: 'PCMCIA kernel module found - cardctl support possible'
##P3 t=720: INFO: 'pcmcia browsing available'
##P3 t=720:  AutoDetect_PCMCIA::matchIDs(0x1033, 0x0035)
##P1 t=720: KILLING: 'Detected a USB-type PCMCIA card - should have been detected already'
##P3 t=720:  Let's continue with the next AutoDetector

##P3 t=720: AutoDetectBase::go() for 'PCMCIA Serial Modem Probing'
##P3 t=720:  AutoDetect_Rawport::traverseTrees()
##P3 t=720:   Checking for ports of type /dev/ttyS*
##P3 t=720:    Checking properties of port /dev/ttyS0
/dev/ttyS0: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS0
##P3 t=720:    Checking properties of port /dev/ttyS1
/dev/ttyS1: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS1
##P3 t=720:    Checking properties of port /dev/ttyS2
/dev/ttyS2: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS2
##P3 t=720:    Checking properties of port /dev/ttyS3
/dev/ttyS3: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS3
##P3 t=720:    Checking properties of port /dev/ttyS4
/dev/ttyS4: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS4
##P3 t=720:    Checking properties of port /dev/ttyS5
/dev/ttyS5: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS5
##P3 t=720:    Checking properties of port /dev/ttyS6
/dev/ttyS6: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS6
##P3 t=720:    Checking properties of port /dev/ttyS7
/dev/ttyS7: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyS7
##P3 t=720: end of traverseTrees()
##P2 t=720: BAD: 'No usable device found'
##P3 t=720:  Let's continue with the next AutoDetector

##P3 t=720:  AutoDetect_PhoneModems::go()
##P3 t=720: AutoDetectBase::go() for 'Phone Modem Probing'
##P3 t=720:  AutoDetect_Rawport::traverseTrees()
##P3 t=720:   Checking for ports of type /dev/ttyACM*
##P3 t=720: end of traverseTrees()
##P2 t=720: BAD: 'No usable device found'
##P3 t=720: AutoDetectBase::go() for 'Phone Modem Probing'
##P3 t=720:  AutoDetect_Rawport::traverseTrees()
##P3 t=720:   Checking for ports of type /dev/rfcomm*
##P3 t=720: end of traverseTrees()
##P2 t=720: BAD: 'No usable device found'
##P3 t=720:  Let's continue with the next AutoDetector

##P3 t=720: AutoDetectBase::go() for 'Raw USB Serial Probing'
##P3 t=720:  AutoDetect_Rawport::traverseTrees()
##P3 t=720:   Checking for ports of type /dev/ttyUSB*
##P3 t=720:    Checking properties of port /dev/ttyUSB0
/dev/ttyUSB0: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyUSB0
##P3 t=720:    Checking properties of port /dev/ttyUSB1
/dev/ttyUSB1: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyUSB1
##P3 t=720:    Checking properties of port /dev/ttyUSB2
/dev/ttyUSB2: Keine Berechtigung
##P3 t=720:      - Nothing on port /dev/ttyUSB2
##P3 t=720: end of traverseTrees()
##P2 t=720: BAD: 'No usable device found'
##P3 t=720:  Let's continue with the next AutoDetector

umtsmon: src/controller/TheDeviceManagerSingleton.cpp:89: static DeviceCapabilities& TheDeviceManagerSingleton::getDeviceCapsRef(): Zusicherung »theStaticDevicePtr != __null« nicht erfüllt.


  *** umtsmon version 0.6.9 closed due to an unrecoverable program error.
  *** Please e-mail all of the above output to umtsmon-develop@lists.sourceforge.net,
  *** Or go to the umtsmon website and file a bug.


Abgebrochen
frank@linux-g254:~>
... und das sagt mir ehrlich gesagt nicht soooo viel ...

Dann bin ich in den Ordner umtsmon0.8 gewechselt und habe umtsmon eingegeben ... dann hat er brav die Version 0.6.9 geöffnet ...

Diese Ausgabe kann ich leider nicht posten, weil sie nicht mehr da ist :(
 

gelau

Newbie
Halllo,

ich würde zunächst mit yast erst einmal umtsmon 0.6.9 sauber deinstallieren, Rechner neu starten und dann über yast umtsmon 0.8 installieren, wenn Du einen recht neuen Kernel betreibst.

Was soll denn eigentlich angesprochen werden? - Ein USB-Gerät oder eine PCMCIA Karte?

Schönen Gruß
Gerhard
 
OP
S

schneemie

Newbie
Die Lösung war Dein Beitrag: "ich würde zunächst mit yast erst einmal umtsmon 0.6.9 sauber deinstallieren, Rechner neu starten und dann über yast umtsmon 0.8 installieren" und der Link von xandl12 zum RPM.

Und danke nochmals :wink:
 

gelau

Newbie
Freue mich darüber, dass es bei Dir geklappt und dass mein Vorschlag funktioniert hat. Hatte ein ähnliches Problem, dass ich so gelöst habe.

Es gibt auch einen MCC Driver for linux von vodafone, der zwar deutlich stabiler, aber auch deutlich langsamer ist.

https://forge.vodafonebetavine.net/projects/vodafonemobilec/

Hat aber auch im Vergleich zu umtsmon ein paar nette features.

Schönen Gruß
Gerhard
 
OP
S

schneemie

Newbie
Deutlich langsamer ? Nein danke. Mich verschlägt es eh meisst in Ecken wo nur GPRS ist ... das ist mir langsam genug :roll:
 
Oben