• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

deal on demand schaltet ab

H

herbk

Member
hallo,
ich habe seit langer Zeit einen alten PC mit Linux als Router laufen.
Leider schaltet sich die deal on demand Funktion immer wieder mal selbsttätig ab - sichtbar dadurch, dass der rote punkt vor dem Kinternet Stecker verschwunden ist.
Reaktion ist dann natürlich auch keine da.
Das tritt recht unregelmäßig auf, manchmal 2 Wochen nicht, manchmal aber auch alle 2 Stunden (heute z.B.)
Ich habe den Router jetzt neu aufgesetzt (von Suse 10.0 auf 10.3, läuft seit heute Abend...) das Prob ist jedoch nach wie vor da...
Für Ideen wo ich mit der Suche beginnen kann währe ich dankbar.
 
OP
H

herbk

Member
hier das Protokol:
Code: 
SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on router2.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: lurking
pppd[0]: Plugin capiplugin.so loaded.
pppd[0]: capiplugin: $Revision: 1.36 $
pppd[0]: capiconn:  1.13 
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: Renamed interface ppp0 to dsl0
pppd[0]: Using interface dsl0
Status is: lurking
pppd[0]: local  IP address 192.168.99.1
pppd[0]: remote IP address 192.168.99.99
pppd[0]: capiplugin: phase dormant.
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: Starting link
Establishing connection due to activity.
Status is: connecting
pppd[0]: capiplugin: phase serialconn (was dormant).
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: connected: "" -> "" outgoing
pppd[0]: capiplugin: using /dev/capi/0: "" -> "" outgoing
pppd[0]: Connect: dsl0 <--> /dev/capi/0
pppd[0]: capiplugin: phase establish (was serialconn).
pppd[0]: capiplugin: phase authenticate (was establish).
pppd[0]: PAP authentication succeeded
pppd[0]: capiplugin: phase network (was authenticate).
pppd[0]: Local IP address changed to 87.175.195.213
pppd[0]: Remote IP address changed to 217.0.117.8
pppd[0]: capiplugin: phase running (was network).
pppd[0]: Script /etc/ppp/ip-up finished (pid 21313), status = 0x0
Status is: connected
bis hierher macht der router was er soll....

dann wird irgendwann das ausgeführt und smpppd schaltet ab - trennt nicht nur die Verbindung, sondern stellt auch deal on demand ab.
Code: 
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3326) - No additional information
pppd[0]: Hangup (SIGHUP)
pppd[0]: Modem hangup
pppd[0]: capiplugin: phase network (was running).
pppd[0]: Connect time 90.9 minutes.
pppd[0]: Sent 374799 bytes, received 4282985 bytes.
pppd[0]: capiplugin: phase establish (was network).
pppd[0]: capiplugin: phase disconnect (was establish).
pppd[0]: Connection terminated.
pppd[0]: capiplugin: phase dead (was disconnect).
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: capiplugin: phase holdoff (was dead).
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: Script /etc/ppp/ip-down finished (pid 21569), status = 0x0
Status is: lurking
pppd[0]: capiplugin: phase dormant (was holdoff).
pppd[0]: capiplugin: phase dormant, again.
pppd[0]: Starting link
Establishing connection due to activity.
Status is: connecting
pppd[0]: capiplugin: phase serialconn (was dormant).
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: connected: "" -> "" outgoing
pppd[0]: capiplugin: using /dev/capi/0: "" -> "" outgoing
pppd[0]: Connect: dsl0 <--> /dev/capi/0
pppd[0]: capiplugin: phase establish (was serialconn).
pppd[0]: capiplugin: phase authenticate (was establish).
pppd[0]: PAP authentication succeeded
pppd[0]: capiplugin: phase network (was authenticate).
pppd[0]: Local IP address changed to 87.175.201.44
pppd[0]: capiplugin: phase running (was network).
pppd[0]: Script /etc/ppp/ip-up finished (pid 21685), status = 0x0
Status is: connected
pppd[0]: Terminating connection due to lack of activity.
The connection was idle and shut down.
Status is: disconnecting
pppd[0]: capiplugin: phase terminate (was running).
pppd[0]: capiplugin: phase network (was terminate).
pppd[0]: Connect time 125.5 minutes.
pppd[0]: Sent 77981 bytes, received 194623 bytes.
pppd[0]: capiplugin: phase establish (was network).
pppd[0]: capiplugin: phase disconnect (was establish).
pppd[0]: Connection terminated.
pppd[0]: capiplugin: phase dead (was disconnect).
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: capiplugin: disconnect(local): "" -> "" outgoing 0x0000 (0x3312) - No additional information
pppd[0]: capiplugin: phase dormant (was dead).
pppd[0]: Script /etc/ppp/ip-down finished (pid 22009), status = 0x0
Status is: lurking
pppd[0]: Starting link
Establishing connection due to activity.
Status is: connecting
pppd[0]: capiplugin: phase serialconn (was dormant).
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: connected: "" -> "" outgoing
pppd[0]: capiplugin: using /dev/capi/0: "" -> "" outgoing
pppd[0]: Connect: dsl0 <--> /dev/capi/0
pppd[0]: capiplugin: phase establish (was serialconn).
pppd[0]: capiplugin: phase authenticate (was establish).
pppd[0]: PAP authentication succeeded
pppd[0]: capiplugin: phase network (was authenticate).
pppd[0]: Local IP address changed to 87.175.233.254
pppd[0]: capiplugin: phase running (was network).
pppd[0]: Script /etc/ppp/ip-up finished (pid 23084), status = 0x0
Status is: connected
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3326) - No additional information
pppd[0]: Hangup (SIGHUP)
pppd[0]: Modem hangup
pppd[0]: capiplugin: phase network (was running).
pppd[0]: Connect time 3.6 minutes.
pppd[0]: Sent 208053 bytes, received 2115352 bytes.
pppd[0]: capiplugin: phase establish (was network).
pppd[0]: capiplugin: phase disconnect (was establish).
pppd[0]: Connection terminated.
pppd[0]: capiplugin: phase dead (was disconnect).
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: capiplugin: phase holdoff (was dead).
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: controller 1: listen_change_state state=0 event=3 ????
pppd[0]: Script /etc/ppp/ip-down finished (pid 23219), status = 0x0
Status is: lurking
pppd[0]: capiplugin: phase dormant (was holdoff).
pppd[0]: capiplugin: phase dormant, again.
pppd[0]: Starting link
Establishing connection due to activity.
Status is: connecting
pppd[0]: capiplugin: phase serialconn (was dormant).
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information
pppd[0]: capiplugin: leased line (adslpppoe)
pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information
pppd[0]: capiplugin: couldn't make connection
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: controller 1: listen_change_state state=1 event=1 ????
pppd[0]: capiplugin: exit
Status is: disconnected
pppd[0] died: Fatal pppd error (exit code 1)

Das Problem tritt am neuen Router noch häufiger auf als am alten. Im Moment 2-3 mal am Tag, auch wenn ich gerade am Surfen bin.

nochmals die Bitte um Hilfe...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben