• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

WLan - Verbindung vorhanden aber kein Ping zum Router

T

TinoHi

Newbie
Hallo,
ich versuche jetzt seit ca. zwei Wochen mit Linux Suse 10.2 meinen Laptop dazu zu überreden mit dem Wirelessrouter eine Verbindung auf zu bauen!

Laptop: Compaq Evo 620C
PCMCIA - Karte: Orinoco (Silver auf Gold geflasht)
Router: Arcor WLan 200

Unter Win2000 (Parallel - Installation) kein Problem.
Unter Linux bekomme ich bei Vergabe von festen IPs auch eine Verbindung angezeigt. Aber wenn ich dann einen Ping zum Router versuche ist dieser nicht erreichbar. (Somit natürlich auch kein Internet!)

Die Firewall habe ich abgeschaltet!
Wenn ich das System so konfiguriere, das es ohne WEP Verschlüsselung arbeitet (Router und Laptop), funktioniert alles!? (Sogar DHCP)
Kann mir da jemand einen Tipp geben?
Vielen Dank!
 
G

Greedy

Member
Vermutlich hast Du einen falschen Schlüssel eingetragen. Verwendest Du wirklich noch WEP? Falls ich das falsch verstandne habe und Du WPA verwendest, installiere mal wpa_supplicant nach und teste dann nochmal
 
OP
T

TinoHi

Newbie
Hallo,

also das Linux das ich verwende ist Suse 10.2. Natürlich habe ich auch schon Yast probiert und nach dem ca. 100sten Versuch bin ich mir auch sicher den richtigen WEP - Schlüssel zu verwenden. Zum anderen habe ich gedacht mal mit WEP anzufangen, da dies wohl einfacher sein dürfte!? (Bitte Wiedersprechen wenn meine Ansichten falsch sind.) Geht WAP den mit den alten Orinoco - Karten?

Wenn ich feste IPs eintrage und den Rechner neu starte zeigt der Networkmanager auch vier kleine Verbindungsbalken. Mache ich dann einen Ping zu meinem Router ist die Antwort immer die selbe (außer ich lasse die WEP - Verschlüsselung weg.):
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.22: icmp_seq=1 Destination Host Unreachable
From 192.168.1.22 icmp_seq=1 Destination Host Unreachable
From 192.168.1.22 icmp_seq=2 Destination Host Unreachable
From 192.168.1.22 icmp_seq=3 Destination Host Unreachable
...

Bei ifconfig erhalte ich:
eth0 Protokoll:Ethernet Hardware Adresse 00:08:02:D7:09:CB
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11

eth1 Protokoll:Ethernet Hardware Adresse 00:60:1D:F2:81:E6
inet Adresse:192.168.1.12 Bcast:255.255.255.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:3264 (3.1 Kb)
Interrupt:3 Basisadresse:0x2100

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:71 errors:0 dropped:0 overruns:0 frame:0
TX packets:71 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:5442 (5.3 Kb) TX bytes:5442 (5.3 Kb)


Antwort: iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

eth1 IEEE 802.11b ESSID:"VNET2" Nickname:"HERMES I"
Mode:Managed Frequency:2.422 GHz Access Point: 00:13:49:F3:98:71
Bit Rate:2 Mb/s Sensitivity:1/3
Retry limit:4 RTS thr:eek:ff Fragment thr:eek:ff
Encryption key:6162-6364-6566-6768-696A-6B6C-6D Security mode:eek:pen
Power Management:eek:ff
Link Quality=44/92 Signal level=-45 dBm Noise level=-89 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:1
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Normalerweise verwende ich natürlich einen anderen WEP - Schlüssel, aber zum probieren habe ich diesen einfachen verwendet.

Antwort auf: route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

Antwort auf:cat /etc/resolv.conf
### BEGIN INFO
#
# Modified_by: NetworkManager
# Process: /usr/bin/NetworkManager
# Process_id: 2742
#
### END INFO
nameserver 192.168.1.1

Mein Router hat natürlich die IP 192.168.1.1

Vielleicht kann jemand mit diesen Infos mehr anfangen als ich!?
Bitte melden im Vorfeld schon mal vielen Dank.

Gruß TinoHi
 
F

Freecoffee

Guru
Das deutet alles darauf hin, dass du nicht mit dem Router verbunden bist. Was steht denn so (auszugsweise!!) in der /var/log/NetworkManager?
 
OP
T

TinoHi

Newbie
Hallo!

Laut dem Ping würde ich dies auch sagen. Aber woher kommt dann die MAC - Adresse des Routers? Ich habe sie nicht eingegeben!
Im Router kann ich auch sehen, das sich der Laptop angemeldet hat!
Und ohne WEP - Verschlüsselung geht alles!!!

So aber nun zur NetworkManager - Log: (Hatte ich bis jetzt noch nicht reingeschaut, aber auch keine Ahnung das es sie gibt.)
Inhalt:

Oct 7 20:06:53 evo1500 NetworkManager: <info> starting...
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.555241] nm_system_device_get_system_config(): found config '/etc/sysconfig/network/ifcfg-wlan-id-00:60:1d:f2:81:e6' for interface 'eth1'
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.555547] nm_system_device_get_system_config(): BOOTPROTO=static
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.555776] nm_system_device_get_system_config(): Adding 'VNET2' to the list of trusted networks
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556009] nm_system_device_get_system_config(): ------ Config (eth1)
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556077] nm_system_device_get_system_config(): dhcp=0
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556161] nm_system_device_get_system_config(): addr=192.168.1.12
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556222] nm_system_device_get_system_config(): gw=192.168.1.1
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556281] nm_system_device_get_system_config(): mask=255.255.255.0
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556348] nm_system_device_get_system_config(): ns_0=192.168.1.1
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.556432] nm_system_device_get_system_config(): ---------------------
Oct 7 20:07:06 evo1500 NetworkManager: <info> eth1: Device is fully-supported using driver 'orinoco_cs'.
Oct 7 20:07:06 evo1500 NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start
Oct 7 20:07:06 evo1500 NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.
Oct 7 20:07:06 evo1500 NetworkManager: <info> Now managing wireless (802.11) device 'eth1'.
Oct 7 20:07:06 evo1500 NetworkManager: <info> Deactivating device eth1.
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983220] nm_system_device_get_system_config(): found config '/etc/sysconfig/network/ifcfg-eth-id-00:08:02:d7:09:cb' for interface 'eth0'
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983420] nm_system_device_get_system_config(): BOOTPROTO=dhcp
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983495] nm_system_device_get_system_config(): ------ Config (eth0)
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983557] nm_system_device_get_system_config(): dhcp=1
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983620] nm_system_device_get_system_config(): addr=0.0.0.0
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983681] nm_system_device_get_system_config(): gw=0.0.0.0
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983741] nm_system_device_get_system_config(): mask=0.0.0.0
Oct 7 20:07:06 evo1500 NetworkManager: <debug> [1191780426.983800] nm_system_device_get_system_config(): ---------------------
Oct 7 20:07:06 evo1500 NetworkManager: <info> eth0: Device is fully-supported using driver 'tg3'.
Oct 7 20:07:06 evo1500 NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start
Oct 7 20:07:07 evo1500 NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.
Oct 7 20:07:07 evo1500 NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'.
Oct 7 20:07:07 evo1500 NetworkManager: <info> Deactivating device eth0.
Oct 7 20:07:20 evo1500 NetworkManager: <WARN> request_and_convert_scan_results(): card took too much time scanning. Get a better one.
Oct 7 20:07:40 evo1500 NetworkManager: <info> SWITCH: no current connection, found better connection 'eth1'.
Oct 7 20:07:40 evo1500 NetworkManager: <info> Will activate connection 'eth1/VNET2'.
Oct 7 20:07:40 evo1500 NetworkManager: <info> Device eth1 activation scheduled...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) started...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 7 20:07:40 evo1500 NetworkManager: <info> Activation (eth1/wireless): access point 'VNET2' is encrypted, and a key exists. No new key needed.
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'AP_SCAN 2'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'ADD_NETWORK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was '0'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 ssid 564e455432'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 scan_ssid 1'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: sending command 'ENABLE_NETWORK 0'
Oct 7 20:07:41 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to access point 'VNET2'.
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Get) scheduled...
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Get) started...
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Get) complete.
Oct 7 20:07:41 evo1500 NetworkManager: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Oct 7 20:07:42 evo1500 NetworkManager: <info> Clearing nscd hosts cache.
Oct 7 20:07:42 evo1500 NetworkManager: <info> Activation (eth1) successful, device activated.
Oct 7 20:07:42 evo1500 NetworkManager: <info> Activation (eth1) Finish handler scheduled.
Oct 7 20:07:42 evo1500 NetworkManager: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
Oct 7 20:07:42 evo1500 NetworkManager: <debug> [1191780462.846803] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:07:55 evo1500 NetworkManager: <info> Updating allowed wireless network lists.
Oct 7 20:08:02 evo1500 NetworkManager: <debug> [1191780482.847721] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:08:22 evo1500 NetworkManager: <debug> [1191780502.848998] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:08:42 evo1500 NetworkManager: <debug> [1191780522.850245] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:09:02 evo1500 NetworkManager: <debug> [1191780542.851469] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:11:22 evo1500 NetworkManager: <debug> [1191780682.860107] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:13:22 evo1500 NetworkManager: <debug> [1191780802.867645] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:15:22 evo1500 NetworkManager: <debug> [1191780922.875155] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:17:22 evo1500 NetworkManager: <debug> [1191781042.882796] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:19:22 evo1500 NetworkManager: <debug> [1191781162.890288] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:21:22 evo1500 NetworkManager: <debug> [1191781282.901927] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:23:22 evo1500 NetworkManager: <debug> [1191781402.909391] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:25:22 evo1500 NetworkManager: <debug> [1191781522.916844] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:27:22 evo1500 NetworkManager: <debug> [1191781642.924330] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'
Oct 7 20:29:22 evo1500 NetworkManager: <debug> [1191781762.932314] nm_device_802_11_wireless_update_bssid(): Roamed from BSSID 00:13:49:F3:98:71 to 00:14:7F:21:43:3C on wireless network 'VNET2'

Auf jedenfall schon mal vielen Dank.

Gruß TinoHi
 
F

Freecoffee

Guru
Also die MAC des Routers kann man per Scan herausfinden ohne eine Verbindung aufzubauen.
Bitte setze die WLAN-Karte noch einmal auf DHCP und poste dann den zugehörigen Abschnitt aus der /var/log/NetworkManager.
 
OP
T

TinoHi

Newbie
Hallo!

Also das NetworkManager - Log mit DHCP:
Oct 8 20:18:08 evo1500 NetworkManager: <info> starting...
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964042] nm_system_device_get_system_config(): found config '/etc/sysconfig/network/ifcfg-wlan-id-00:60:1d:f2:81:e6' for interface 'eth1'
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964238] nm_system_device_get_system_config(): BOOTPROTO=dhcp
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964423] nm_system_device_get_system_config(): Adding 'VNET2' to the list of trusted networks
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964468] nm_system_device_get_system_config(): ------ Config (eth1)
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964492] nm_system_device_get_system_config(): dhcp=1
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964537] nm_system_device_get_system_config(): addr=0.0.0.0
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964559] nm_system_device_get_system_config(): gw=0.0.0.0
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964581] nm_system_device_get_system_config(): mask=0.0.0.0
Oct 8 20:18:19 evo1500 NetworkManager: <debug> [1191867499.964606] nm_system_device_get_system_config(): ---------------------
Oct 8 20:18:19 evo1500 NetworkManager: <info> eth1: Device is fully-supported using driver 'orinoco_cs'.
Oct 8 20:18:19 evo1500 NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start
Oct 8 20:18:20 evo1500 NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.
Oct 8 20:18:20 evo1500 NetworkManager: <info> Now managing wireless (802.11) device 'eth1'.
Oct 8 20:18:20 evo1500 NetworkManager: <info> Deactivating device eth1.
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424074] nm_system_device_get_system_config(): found config '/etc/sysconfig/network/ifcfg-eth-id-00:08:02:d7:09:cb' for interface 'eth0'
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424302] nm_system_device_get_system_config(): BOOTPROTO=static
Oct 8 20:18:20 evo1500 NetworkManager: <info> Network configuration for device 'eth0' does not specify a gateway but is statically configured (non-DHCP).
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424633] nm_system_device_get_system_config(): ------ Config (eth0)
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424698] nm_system_device_get_system_config(): dhcp=0
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424762] nm_system_device_get_system_config(): addr=10.0.0.2
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424823] nm_system_device_get_system_config(): gw=0.0.0.0
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424883] nm_system_device_get_system_config(): mask=255.255.255.0
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.424951] nm_system_device_get_system_config(): ns_0=192.168.1.1
Oct 8 20:18:20 evo1500 NetworkManager: <debug> [1191867500.425009] nm_system_device_get_system_config(): ---------------------
Oct 8 20:18:20 evo1500 NetworkManager: <info> eth0: Device is fully-supported using driver 'tg3'.
Oct 8 20:18:20 evo1500 NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start
Oct 8 20:18:20 evo1500 NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.
Oct 8 20:18:20 evo1500 NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'.
Oct 8 20:18:20 evo1500 NetworkManager: <info> Deactivating device eth0.
Oct 8 20:18:34 evo1500 NetworkManager: <WARN> request_and_convert_scan_results(): card took too much time scanning. Get a better one.
Oct 8 20:18:54 evo1500 NetworkManager: <info> SWITCH: no current connection, found better connection 'eth1'.
Oct 8 20:18:54 evo1500 NetworkManager: <info> Will activate connection 'eth1/VNET2'.
Oct 8 20:18:54 evo1500 NetworkManager: <info> Device eth1 activation scheduled...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) started...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 8 20:18:54 evo1500 NetworkManager: <info> Activation (eth1/wireless): access point 'VNET2' is encrypted, and a key exists. No new key needed.
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant '
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'AP_SCAN 2'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'ADD_NETWORK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was '0'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 ssid 564e455432'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 scan_ssid 1'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: sending command 'ENABLE_NETWORK 0'
Oct 8 20:18:55 evo1500 NetworkManager: <info> SUP: response was 'OK'
Oct 8 20:18:55 evo1500 NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 8 20:18:55 evo1500 NetworkManager: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to access point 'VNET2'.
Oct 8 20:18:55 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 8 20:18:55 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Oct 8 20:18:56 evo1500 NetworkManager: <info> Activation (eth1) Beginning DHCP transaction.
Oct 8 20:18:56 evo1500 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Oct 8 20:18:56 evo1500 NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth1
Oct 8 20:18:57 evo1500 NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth1
Oct 8 20:19:03 evo1500 NetworkManager: <info> Old device 'eth1' activating, won't change.
Oct 8 20:19:03 evo1500 NetworkManager: <info> Updating allowed wireless network lists.
Oct 8 20:19:03 evo1500 NetworkManager: <info> Old device 'eth1' activating, won't change.
Oct 8 20:19:41 evo1500 NetworkManager: <info> Device 'eth1' DHCP transaction took too long (>45s), stopping it.
Oct 8 20:19:42 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Timeout) scheduled...
Oct 8 20:19:42 evo1500 NetworkManager: <info> DHCP daemon state is now 14 (normal exit) for interface eth1
Oct 8 20:19:42 evo1500 NetworkManager: <info> DHCP daemon state is now 11 (unknown) for interface eth1
Oct 8 20:19:42 evo1500 NetworkManager: <info> DHCP daemon state is now 14 (normal exit) for interface eth1
Oct 8 20:19:42 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Timeout) started...
Oct 8 20:19:42 evo1500 NetworkManager: <debug> [1191867582.322007] real_act_stage4_ip_config_timeout(): Activation (eth1/wireless): could not get IP configuration info for 'VNET2', asking for new key.
Oct 8 20:19:42 evo1500 NetworkManager: <info> Activation (eth1) New wireless user key requested for network 'VNET2'.
Oct 8 20:19:42 evo1500 NetworkManager: <info> Activation (eth1) Stage 4 of 5 (IP Configure Timeout) complete.
Oct 8 20:19:55 evo1500 NetworkManager: <WARN> nm_dbus_get_user_key_for_network_cb(): nm_dbus_get_user_key_for_network_cb(): dbus returned an error. (org.freedesktop.NetworkManagerInfo.GetKeyError) org.freedesktop.NetworkManagerInfo.GetKeyError
Oct 8 20:19:55 evo1500 NetworkManager: <info> Deactivating device eth1.
Oct 8 20:19:55 evo1500 NetworkManager: <info> Activation (eth1): cancelling...
Oct 8 20:19:55 evo1500 NetworkManager: <info> Activation (eth1) cancellation handler scheduled...
Oct 8 20:19:55 evo1500 NetworkManager: <info> Activation (eth1): waiting for device to cancel activation.
Oct 8 20:19:55 evo1500 NetworkManager: <info> Activation (eth1) cancellation handled.
Oct 8 20:19:55 evo1500 NetworkManager: <info> Activation (eth1): cancelled.

Was mich stört, ist das wpa_supplicant immer auftaucht! Ich bin mir nicht bewußt dies gezielt installiert zu haben, aber wenn ich unter Yast nachschaue finde ich dieses Packet als installiert vor.
Soll ich wpa_supplicant mal deinstallieren?

Vielen Dank.
Gruß TinoHi
 
F

Freecoffee

Guru
Also das sieht komisch aus. Was ist das denn für eine Gegenstelle? Hast du die Möglichkeit, einmal einen anderen WLAN-Adapter zu testen?
 
OP
T

TinoHi

Newbie
Hallo,

also der WLan - Router ist ein Arcor WLAN 200. (Eigentlich ein Zyxel)
Eine zweite Orinoco - Karte habe ich auch schon probiert, aber das Ergebnis ist das selbe. Dann habe ich noch eine WLAN - Karte mit rtl8185 Chipsatz probiert, aber hier bin ich am Treiber kompilieren gescheitert.

Ich habe noch einen Arcor WLAN 100. (Auch Zyxel)
Den werde ich mal probieren. Ansonsten muß ich mal zu einem Bekannten mit einem anderen Router fahren.

Ansonsten werde ich auch mal WPA probiern, da wpa_supplicant ja nach meinen neuesten Erkenntnissen auch für die Hostap_cs geeignet ist.

Auf jeden Fall vielen Dank, und ich werde mich wieder melden.

Gruß TinoHi
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben