Hallo,
habe einen Rechner mal versuchsweise mit Suse Linux 10.2 installiert.
Installation verlief also völlig problemlos. Ja bis auf die Netzwerk Karte, die zwar als Hardware richtig erkannt wird, aber nicht ins Netz kommt.
Wenn ich die Karte vom selben Rechner aus anpinge funktioniert es.
Habe das FAQ zum Netzwerk und Internet durchgearbeitet, kann aber den Fehler nicht finden/beseitigen.
Ich bin also völliger Suse Linux Neuling. Bitte keine Antworten wie lerne erst mal Netzwerk u.s.w helfen mir also nicht weiter.
Ich arbeite in einem Windows Netzwerk mit der Fritz Box als Router.
Funktioniert einwandfrei.
Hier mal eine Windows-IP-Konfiguration von einem Rechner aus dem Netz.
Hostname. . . . . . . . . . . . . : XXXXX (geändert)
Primäres DNS-Suffix . . . . . . . :
Knotentyp . . . . . . . . . . . . : Unbekannt
IP-Routing aktiviert. . . . . . . : Nein
WINS-Proxy aktiviert. . . . . . . :Nein
Ethernetadapter
LAN-Verbindung:
Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC
Physikalische Adresse . . . . . . : 00-11-3B-01-8D-11
DHCP aktiviert. . . . . . . . . . : Nein
IP-Adresse. . . . . . . . . . . . : 192.168.178.XX (geändert)
Subnetzmaske. . . . . . . . . . . : 255.255.255.0 Standardgateway . . . . . . . . . : 192.168.178.1 (Router)
DNS-Server. . . . . . . . . . . . : 192.168.178.1 (Router)
===========================================================================
Schnittstellenliste
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 11 3b 01 8d 11 ...... Micronet SP2612R 10/100/1000 Mbps Gigabit Ethernet Adapter - Paketplaner-Miniport
===========================================================================
===========================================================================
Aktive Routen:
Netzwerkziel Netzwerkmaske Gateway Schnittstelle Anzahl
0.0.0.0 0.0.0.0 192.168.178.1 192.168.178.20 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.178.0 255.255.255.0 192.168.178.20 192.168.178.20 10
192.168.178.20 255.255.255.255 127.0.0.1 127.0.0.1 10
192.168.178.255 255.255.255.255 192.168.178.20 192.168.178.20 10
224.0.0.0 240.0.0.0 192.168.178.20 192.168.178.20 10
255.255.255.255 255.255.255.255 192.168.178.20 192.168.178.20 1
Standardgateway: 192.168.178.1
===========================================================================
Von meinem Linux Rechner
Ich hoffe mir kann jemand helfen. Probiere da jetzt schon mehrere Tage herrum.
Besten Dank im vorraus.
Viele Grüße Peter
habe einen Rechner mal versuchsweise mit Suse Linux 10.2 installiert.
Installation verlief also völlig problemlos. Ja bis auf die Netzwerk Karte, die zwar als Hardware richtig erkannt wird, aber nicht ins Netz kommt.
Wenn ich die Karte vom selben Rechner aus anpinge funktioniert es.
Habe das FAQ zum Netzwerk und Internet durchgearbeitet, kann aber den Fehler nicht finden/beseitigen.
Ich bin also völliger Suse Linux Neuling. Bitte keine Antworten wie lerne erst mal Netzwerk u.s.w helfen mir also nicht weiter.
Ich arbeite in einem Windows Netzwerk mit der Fritz Box als Router.
Funktioniert einwandfrei.
Hier mal eine Windows-IP-Konfiguration von einem Rechner aus dem Netz.
Hostname. . . . . . . . . . . . . : XXXXX (geändert)
Primäres DNS-Suffix . . . . . . . :
Knotentyp . . . . . . . . . . . . : Unbekannt
IP-Routing aktiviert. . . . . . . : Nein
WINS-Proxy aktiviert. . . . . . . :Nein
Ethernetadapter
LAN-Verbindung:
Verbindungsspezifisches DNS-Suffix:
Beschreibung. . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC
Physikalische Adresse . . . . . . : 00-11-3B-01-8D-11
DHCP aktiviert. . . . . . . . . . : Nein
IP-Adresse. . . . . . . . . . . . : 192.168.178.XX (geändert)
Subnetzmaske. . . . . . . . . . . : 255.255.255.0 Standardgateway . . . . . . . . . : 192.168.178.1 (Router)
DNS-Server. . . . . . . . . . . . : 192.168.178.1 (Router)
===========================================================================
Schnittstellenliste
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 11 3b 01 8d 11 ...... Micronet SP2612R 10/100/1000 Mbps Gigabit Ethernet Adapter - Paketplaner-Miniport
===========================================================================
===========================================================================
Aktive Routen:
Netzwerkziel Netzwerkmaske Gateway Schnittstelle Anzahl
0.0.0.0 0.0.0.0 192.168.178.1 192.168.178.20 10
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.178.0 255.255.255.0 192.168.178.20 192.168.178.20 10
192.168.178.20 255.255.255.255 127.0.0.1 127.0.0.1 10
192.168.178.255 255.255.255.255 192.168.178.20 192.168.178.20 10
224.0.0.0 240.0.0.0 192.168.178.20 192.168.178.20 10
255.255.255.255 255.255.255.255 192.168.178.20 192.168.178.20 1
Standardgateway: 192.168.178.1
===========================================================================
Von meinem Linux Rechner
Code:
collectNWData.sh 0.3.4
Invocation parameters: -sf
*** uname -a
Linux linux-7ms2 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux
*** cat /etc/SuSE-release
openSUSE 10.2 (i586)
VERSION = 10.2
*** cat /etc/resolv.conf | grep -v "^#" | grep -v "^$"
nameserver 192.168.178.1
*** cat /etc/hosts | grep -v "^#" | grep -v "^$" | grep -v "::"
127.0.0.1 localhost
192.168.178.29 linux-7ms2.S1 linux-7ms2
*** cat /proc/sys/net/ipv4/ip_forward
0
*** iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
*** route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.178.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.178.1 0.0.0.0 UG 0 0 0 eth0
*** ifconfig
eth0 Link encap:Ethernet HWaddr 00:40:33:A6:5A:5D
inet addr:192.168.178.29 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::240:33ff:fea6:5a5d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:2 dropped:0 overruns:0 frame:0
TX packets:127 errors:4 dropped:0 overruns:0 carrier:8
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:5598 (5.4 Kb)
Interrupt:10 Base address:0xc800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:203 errors:0 dropped:0 overruns:0 frame:0
TX packets:203 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17636 (17.2 Kb) TX bytes:17636 (17.2 Kb)
*** pingMyLocalIPs
192.168.178.29 : Ping response
127.0.0.1 : Ping response
*** ping -c1 -W 3 195.135.220.3
PING 195.135.220.3 (195.135.220.3) 56(84) bytes of data.
From 192.168.178.29: icmp_seq=1 Destination Host Unreachable
--- 195.135.220.3 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
*** ping -c1 -W 3 www.suse.de
*** iptables -L -vn
Chain INPUT (policy ACCEPT 49 packets, 4036 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 76 packets, 5656 bytes)
pkts bytes target prot opt in out source destination
*** cat /etc/sysconfig/SuSEfirewall2 | grep -v "^#" | grep -v "^$"
FW_DEV_EXT="any"
FW_DEV_INT=""
FW_DEV_DMZ=""
FW_ROUTE="no"
FW_MASQUERADE="no"
FW_MASQ_DEV="$FW_DEV_EXT"
FW_MASQ_NETS="0/0"
FW_PROTECT_FROM_INT="no"
FW_SERVICES_EXT_TCP=""
FW_SERVICES_EXT_UDP=""
FW_SERVICES_EXT_IP=""
FW_SERVICES_EXT_RPC=""
FW_CONFIGURATIONS_EXT=""
FW_SERVICES_DMZ_TCP=""
FW_SERVICES_DMZ_UDP=""
FW_SERVICES_DMZ_IP=""
FW_SERVICES_DMZ_RPC=""
FW_CONFIGURATIONS_DMZ=""
FW_SERVICES_INT_TCP=""
FW_SERVICES_INT_UDP=""
FW_SERVICES_INT_IP=""
FW_SERVICES_INT_RPC=""
FW_CONFIGURATIONS_INT=""
FW_SERVICES_DROP_EXT=""
FW_SERVICES_REJECT_EXT="0/0,tcp,113"
FW_SERVICES_ACCEPT_EXT=""
FW_TRUSTED_NETS=""
FW_ALLOW_INCOMING_HIGHPORTS_TCP=""
FW_ALLOW_INCOMING_HIGHPORTS_UDP=""
FW_FORWARD=""
FW_FORWARD_MASQ=""
FW_REDIRECT=""
FW_LOG_DROP_CRIT="yes"
FW_LOG_DROP_ALL="no"
FW_LOG_ACCEPT_CRIT="yes"
FW_LOG_ACCEPT_ALL="no"
FW_LOG_LIMIT=""
FW_LOG=""
FW_KERNEL_SECURITY="yes"
FW_STOP_KEEP_ROUTING_STATE="no"
FW_ALLOW_PING_FW="yes"
FW_ALLOW_PING_DMZ="no"
FW_ALLOW_PING_EXT="no"
FW_ALLOW_FW_SOURCEQUENCH=""
FW_ALLOW_FW_BROADCAST_EXT="no"
FW_ALLOW_FW_BROADCAST_INT="no"
FW_ALLOW_FW_BROADCAST_DMZ="no"
FW_IGNORE_FW_BROADCAST_EXT="yes"
FW_IGNORE_FW_BROADCAST_INT="no"
FW_IGNORE_FW_BROADCAST_DMZ="no"
FW_ALLOW_CLASS_ROUTING=""
FW_CUSTOMRULES=""
FW_REJECT=""
FW_REJECT_INT="yes"
FW_HTB_TUNE_DEV=""
FW_IPv6=""
FW_IPv6_REJECT_OUTGOING=""
FW_IPSEC_TRUST="no"
FW_ZONES=""
FW_USE_IPTABLES_BATCH=""
FW_LOAD_MODULES=""
FW_FORWARD_ALWAYS_INOUT_DEV=""
FW_SERVICES_ACCEPT_INT=""
FW_SERVICES_ACCEPT_DMZ=""
Ich hoffe mir kann jemand helfen. Probiere da jetzt schon mehrere Tage herrum.
Besten Dank im vorraus.
Viele Grüße Peter