windowsfreigabe mit fstab einbinden

hi!
ich weiss dass es das thema schon x mal gab, und ich hab mirs auch alles durchgelesen. leider klappt es trotzdem nicht.

ich würde gerne eine freigabe von einem win rechner (ntsf) einbinden. als root in der konsole klappt das auch ganz genau so wie ich es will mit:
smbmount //server/mp3 /home/mat/mp3 -o password=,uid=1000,gid=100

in meine fstab hab ich diese als letzte zeile eingegeben:
//server/mp3 /home/mat/mp3 smbfs auto,password=,uid=1000,gid=100 0 0

ich habe schon einiges andres durchprobiert (mist schon wieder 4 uhr), aber es will einfach nicht funktionieren!! wäre super wenn ihr mir weiterhelfen könntet!!

danke im vorraus!

Was bekommst du denn für Fehlermeldungen ?
Sollten in der boot.msg zu lesen sein.

Bzw. setze als Filesystem mal "cifs" anstelle von "smbfs" ein.

Btw. sollte eher die /etc/samba/smbfstab genutzt werden, wegen dem Passwort im Klartext.
Die smbfstab kann nur root einsehen ... die fstab jeder User

danke für die schnelle antwort!

mit cifs als dateisystem gings auch nicht!
in der boot.msg finde ich nicht wirklcih eine fehlermeldung, nur dass keine devices gemountet wurden. hier mal die ganze boot.msg!

das mit der smbsfstab und der fstab weiss ich, aber da es ein kleines privates netzwerk ist war mir das für den anfang ziehmlich

Inspecting /boot/System.map-2.6.13-15.12-default
Loaded 24248 symbols from /boot/System.map-2.6.13-15.12-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15.12-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Thu Aug 24 11:23:58 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
<4> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<6>found SMP MP-table at 000fb990
<7>On node 0 totalpages: 65520
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 61424 pages, LIFO batch:31
<7> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 AMI ) @ 0x000fa9f0
<7>ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0fff0000
<7>ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0fff0030
<7>ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0fff00c0
<7>ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<6>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
<4>Processor #0 6:8 APIC version 17
<6>I/O APIC #2 Version 3 at 0xFEC00000.
<6>Processors: 1
<4>Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda2 vga=0x31a selinux=0 resume=/dev/hda1 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 1024 (order: 10, 16384 bytes)
<4>Detected 1804.291 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 253912k/262080k available (2030k kernel code, 7580k reserved, 694k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 3612.06 BogoMIPS (lpj=7224128)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 64K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>mtrr: v2.0 (20020519)
<4>CPU: AMD Duron(tm) stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1773k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 1c00)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 10 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: dde00000-dfefffff
<6> PREFETCH window: cdc00000-ddcfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(1158582880.912:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:edd0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
<4>Console: switching to colour frame buffer device 158x59
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<4>PNP: PS/2 controller doesn't have AUX irq; using default 0xc
<6>PNP: PS/2 Controller [PNP0303S2K] at 0x60,0x64 irq 112
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>PCI0 USB1 USB2 USB3 USB4 EHCI USBD UAR1 AC9 MC9 ILAN SLPB
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<7>libata version 1.12 loaded.
<7>sata_via version 1.1
<4> ACPI-0212: *** Warning: Device is not power manageable
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:0f.0 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
<6>PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 10
<6>sata_via(0000:00:0f.0): routed to hard irq line 10
<6>ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 10
<6>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
<6>ata1: no device found (phy stat 00000000)
<6>scsi0 : sata_via
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>ata2: no device found (phy stat 00000000)
<6>scsi1 : sata_via
<6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
<4> ACPI-0212: *** Warning: Device is not power manageable
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 11
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
<6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddio
<7>Probing IDE interface ide0...
<4>hda: Maxtor 34098H4, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
<6>hda: cache flushes not supported
<6> hda: hda1 hda2
<7>Probing IDE interface ide1...
<4>hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>ACPI: CPU0 (power states: C1[C1])
<6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda2: using ordered data mode
<5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda2: checking transaction log (hda2)
<5>ReiserFS: hda2: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>bootsplash: status on console 0 changed to on
<6>Adding 1036152k swap on /dev/hda1. Priority:-1 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon Sep 18 14:34:52 2006

Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneMounting shared memory FS on /dev/shmdone
Activating swap-devices in /etc/fstab...
doneActivating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
parsing options: rw,password=,uid=1000,gid=100
mount error: could not find target server. TCP name server/mp3 not found
No ip address specified and hostname not found
failedSetting up the CMOS clockdone
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=788 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/udevd ]
done
<notice>killproc: kill(2044,29)
Creating /var/log/boot.msg
doneStarting udevd done
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
Starting Firewall Initialization (phase 1 of 2) Coldplug
Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer'
processing eventsdone
SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Restore device permissionsdone
Loading required kernel modules
doneActivating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(2044,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Mon Sep 18 14:35:06 2006

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 4280<notice>checkproc: /sbin/udevd 4239<notice>checkproc: /sbin/udevd 4206<notice>checkproc: /sbin/udevd 3757<notice>checkproc: /sbin/udevd 3718<notice>checkproc: /sbin/udevd 2295
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
Starting resource managerdone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneSetting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
eth0 configuration: eth-id-00:0c:76:40:f7:95
eth0 (DHCP) . . . <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
. . no IP address yet... backgrounding.
waiting
Waiting for mandatory devices: eth-id-00:0c:76:40:f7:95 __NSC__
13 <notice>pidofproc: dhcpcd 4828
12 <notice>checkproc: /opt/kde3/bin/kdm 4873
<notice>killproc: kill(4854,15)

eth0 device: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
eth0 configuration: eth-id-00:0c:76:40:f7:95
eth0 DHCP client (dhcpcd) is running
eth0 IP address: 192.168.0.3/24
doneSetting up service network . . . . . . . . . . . . . . . .done
Starting service kdmdone
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting mail service (Postfix)Starting nfsboot (sm-notify) done
Importing Net File System (NFS)unused
done
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting cupsddone
Starting HAL daemondone
Checking/updating CPU microcodeMount SMB/ CIFS File Systems
from /etc/fstab . done
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>checkproc: /opt/kde3/bin/kdm 4873
Starting powersaved (accessing ACPI events over acpid) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: nfs
<notice>killproc: kill(4277,3)

mount error: could not find target server. TCP name server/mp3 not found
No ip address specified and hostname not found

Zum Vergrößern anklicken....

Er findet den "server" nicht.
Läuft dieser zum Zeitpunkt des Mountens ?
Hast du dessen IP plus Namen in der /etc/hosts eingetragen?
Hast du schon versucht mit IP zu mounten ?

Bzw. startest das Netzwerk erst _nach_ dem Mount-Versuch ... da wird es wohl daran liegen.
=> doch besser die /etc/samba/smbfstab nutzen :roll:


EDIT:
Bitte demnächst für solche Log-Files nopaste nutzen:
http://phpfi.com/
Danke

danke!! es klappt!
ich hab das filesystem auf cifs umgestellt, in die /etc/hosts den server mit ip eingetragen, das ganze in die smbfstab eingetragen!!
vielen dank für die hilfe!