i-net langsam

linux:/home/sebastian # ifconfig
eth0 Protokoll:Ethernet Hardware Adresse 00:03:0D:1D:C6:A5
inet Adresse:192.168.69.2 Bcast:192.168.69.255 Maske:255.255.255.0
inet6 Adresse: fe80::203:dff:fe1d:c6a5/64 Gültigkeitsbereich:Verbindung
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:173215 errors:0 dropped:0 overruns:0 frame:0
TX packets:92745 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:196 Sendewarteschlangenlänge:100
RX bytes:171632321 (163.6 Mb) TX bytes:6936573 (6.6 Mb)
Interrupt:9 Basisadresse:0xa400

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:52 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:3400 (3.3 Kb) TX bytes:3400 (3.3 Kb)

Zum Vergrößern anklicken....

linux:/home/sebastian # route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.69.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.69.254 0.0.0.0 UG 0 0 0 eth0
linux:/home/sebastian #

Zum Vergrößern anklicken....

# Info: This is a temporary resolv.conf created by service dhcpcd.
# The previous file has been saved and will be restored later.
#
# If you don't like your resolv.conf to be changed, you
# can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This
# variables are placed in /etc/sysconfig/network/config.
#
# You can also configure service dhcpcd not to modify it.
#
# If you don't like dhcpcd to change your nameserver
# settings
# then either set DHCLIENT_MODIFY_RESOLV_CONF=no
# in /etc/sysconfig/network/dhcp, or
# set MODIFY_RESOLV_CONF_DYNAMICALLY=no in
# /etc/sysconfig/network/config or (manually) use dhcpcd
# with -R. If you only want to keep your searchlist, set
# DHCLIENT_KEEP_SEARCHLIST=yes in /etc/sysconfig/network/dhcp or
# (manually) use the -K option.
#
### END INFO
#
domain local
nameserver 192.168.69.254

Zum Vergrößern anklicken....