nebukaddezar
Newbie
Hi,
nach dem ich endlich das System so hin bekommen habe wie ich es will dachte ich mir "so jetzt ab ins www"...
vorab..
dsl mit pppoe hat funktioniert. Ich habe mein Linux neu installiert da ich etwas anderes haben wollte... Netzwerkkarte fujktioniert auch.Unter Windows komme ich normal ins internet rein. bei der letzten installation hat die einrichtung voninternet genau 2 Minuten gedauert. Alles war ok.
Ich weiss nicht wo das problem liegt. Er kann sich einfach nicht verbinden.
unter lspci ist das gerät sichtbar...
protokol-KInternet sagt mir:
---------------------------------------------------------------------
SuSe Meta pppd (smppd-ifcfg),Version 1.59 on Linux
Status is: disconnected
trying to connecting to smppd
connected to smppd
Status is .disconnected
interface is eth0.
Status is: connecting
pppd[0]lugin rp-pppoe.so loaded
pppd[0]:Rp
P-PPPoE plugin version 3.3 compiled against ppd 2.4.3
pppd[0]lugin passwordfd.so loaded
pppd[0]:Renamed interface ppp0 to dsl0
pppd[0]:using interface dsl0
Status is: connecting
pppd[0]: Connect:dsl0<-->eth0
pppd[0]:Couldn't increase MTU to 1500
pppd[0]:Couldn't increase MRU to 1500
pppd[0]:CHAP authentication failed: Request denied
pppd[0]:Couldn't increase MTU to 1500
pppd[0]:Couldn't increase MRU to 1500
pppd[0]:Connection terminated
status is: disconnecting
status is: disconnected
pppd[0] died: Authentication error (exit code 19)
----------------------------------------------------------
ich habe die netzwerkkarte als 192.168.0.1 konfiguriert.
dsl von Hansanet...
username und passwort stimmen...
Ich weiss nicht was ihr noch braucht um mir da weiter zu helfen...DAs interessante ist das ich bei der letzten installation wirklich nur 2 minuten gebraucht habe für die Konfiguration. es hat auchwährend der Installation funktioniert. Ist mir ein rätsel wenn ich es mal so sagen darf..
dank im Voraus für die Hilfe....
Gruß
nach dem ich endlich das System so hin bekommen habe wie ich es will dachte ich mir "so jetzt ab ins www"...
vorab..
dsl mit pppoe hat funktioniert. Ich habe mein Linux neu installiert da ich etwas anderes haben wollte... Netzwerkkarte fujktioniert auch.Unter Windows komme ich normal ins internet rein. bei der letzten installation hat die einrichtung voninternet genau 2 Minuten gedauert. Alles war ok.
Ich weiss nicht wo das problem liegt. Er kann sich einfach nicht verbinden.
unter lspci ist das gerät sichtbar...
protokol-KInternet sagt mir:
---------------------------------------------------------------------
SuSe Meta pppd (smppd-ifcfg),Version 1.59 on Linux
Status is: disconnected
trying to connecting to smppd
connected to smppd
Status is .disconnected
interface is eth0.
Status is: connecting
pppd[0]lugin rp-pppoe.so loaded
pppd[0]:Rp
P-PPPoE plugin version 3.3 compiled against ppd 2.4.3
pppd[0]lugin passwordfd.so loaded
pppd[0]:Renamed interface ppp0 to dsl0
pppd[0]:using interface dsl0
Status is: connecting
pppd[0]: Connect:dsl0<-->eth0
pppd[0]:Couldn't increase MTU to 1500
pppd[0]:Couldn't increase MRU to 1500
pppd[0]:CHAP authentication failed: Request denied
pppd[0]:Couldn't increase MTU to 1500
pppd[0]:Couldn't increase MRU to 1500
pppd[0]:Connection terminated
status is: disconnecting
status is: disconnected
pppd[0] died: Authentication error (exit code 19)
----------------------------------------------------------
ich habe die netzwerkkarte als 192.168.0.1 konfiguriert.
dsl von Hansanet...
username und passwort stimmen...
Ich weiss nicht was ihr noch braucht um mir da weiter zu helfen...DAs interessante ist das ich bei der letzten installation wirklich nur 2 minuten gebraucht habe für die Konfiguration. es hat auchwährend der Installation funktioniert. Ist mir ein rätsel wenn ich es mal so sagen darf..
dank im Voraus für die Hilfe....
Gruß