• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Einwahl ins Internet klappt nicht

Hallo

hab vor 3 tagen mir Suse Linux 9.3 installiert und hab ziemliche Probleme damit. Zuerst würde ich erst mal wollen das mein Internetzugang klappt, aber irgendwie bekomme ich das nicht hin. Hab meine Festplatte geteilt und unter Windows geht’s mit dem Internet. Hab nun schon an einigen rumgestellt, aber der Erfolg war eher gering. Also hier erstmal was zu den Daten:

Ich gehe normalerweise über Faventia ins Internet.
Es ist ein Analogmodem von Sitecom DC-010. In Yast wird es auch als solches erkannt:

Bereits konfigurierte Geräte:
SiteCom Europe BV 536EP Data Fax Modem
Als modem0 mit Provider Faventia konfiguriert
Sobald ich mich mit Kinternet einwählen will, kommt kurz dieser kleine Blitz und dann nichts mehr. Das ist die Fehlermeldung:
SuSE Meta pppd (smpppd-ifcfg), Version 1.58 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
Status is: disconnected
pppd[0] died: pppd options error (exit code 2)
Hab mal die ganzen Tests bei Problemen mit der Internetverbindung gemacht und poste sie hier mal:

Windows-IP-Konfiguration



Hostname. . . . . . . . . . . . . : KATHLEEN

Prim�es DNS-Suffix . . . . . . . :

Knotentyp . . . . . . . . . . . . : Unbekannt

IP-Routing aktiviert. . . . . . . : Nein

WINS-Proxy aktiviert. . . . . . . : Nein



Ethernetadapter LAN-Verbindung:



Verbindungsspezifisches DNS-Suffix:

Beschreibung. . . . . . . . . . . : Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller

Physikalische Adresse . . . . . . : 00-11-D8-C0-B4-61

DHCP aktiviert. . . . . . . . . . : Nein

IP-Adresse. . . . . . . . . . . . : 169.254.8.96

Subnetzmaske. . . . . . . . . . . : 255.255.0.0

Standardgateway . . . . . . . . . :

===========================================================================
Schnittstellenliste
0x1 ........................... MS TCP Loopback interface
0x2 ...00 11 d8 c0 b4 61 ...... Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Paketplaner-Miniport
===========================================================================
===========================================================================
Aktive Routen:
Netzwerkziel Netzwerkmaske Gateway Schnittstelle Anzahl
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
169.254.0.0 255.255.0.0 169.254.8.96 169.254.8.96 20
169.254.8.96 255.255.255.255 127.0.0.1 127.0.0.1 20
169.254.255.255 255.255.255.255 169.254.8.96 169.254.8.96 20
224.0.0.0 240.0.0.0 169.254.8.96 169.254.8.96 20
255.255.255.255 255.255.255.255 169.254.8.96 169.254.8.96 1
===========================================================================
Stndige Routen:
Keine


linux:/home/kathleen # ping localhost
PING localhost (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.076 ms
64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from localhost (127.0.0.1): icmp_seq=3 ttl=64 time=0.052 ms
64 bytes from localhost (127.0.0.1): icmp_seq=4 ttl=64 time=0.067 ms
64 bytes from localhost (127.0.0.1): icmp_seq=5 ttl=64 time=0.067 ms
64 bytes from localhost (127.0.0.1): icmp_seq=6 ttl=64 time=0.065 ms

--- localhost ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 4999ms
rtt min/avg/max/mdev = 0.052/0.066/0.076/0.007 ms

linux:/home/kathleen # ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.061 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.063 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.064 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.069 ms
64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.063 ms
64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.064 ms

--- 127.0.0.1 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 4998ms
rtt min/avg/max/mdev = 0.061/0.064/0.069/0.002 ms

linux:/home/kathleen # ping 169.254.8.96
PING 169.254.8.96 (169.254.8.96) 56(84) bytes of data.
64 bytes from 169.254.8.96: icmp_seq=1 ttl=64 time=0.076 ms
64 bytes from 169.254.8.96: icmp_seq=2 ttl=64 time=0.065 ms
64 bytes from 169.254.8.96: icmp_seq=3 ttl=64 time=0.065 ms
64 bytes from 169.254.8.96: icmp_seq=4 ttl=64 time=0.069 ms
64 bytes from 169.254.8.96: icmp_seq=5 ttl=64 time=0.065 ms

--- 169.254.8.96 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.065/0.068/0.076/0.004 ms

linux:/home/kathleen # ifconfig
eth0 Protokoll:Ethernet Hardware Adresse 00:11:D8:C0:B4:61
inet Adresse:169.254.8.96 Bcast:169.254.255.255 Maske:255.255.0.0
inet6 Adresse: fe80::211:d8ff:fec0:b461/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43 errors:0 dropped:0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:6612 (6.4 Kb) TX bytes:2188 (2.1 Kb)
Interrupt:169 Speicher:d7bfc000-0

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:108 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:7633 (7.4 Kb) TX bytes:7633 (7.4 Kb)

linux:/home/kathleen # route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
link-local * 255.255.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default linux.site 0.0.0.0 UG 0 0 0 eth0


linux:/home/kathleen # cat /etc/resolv.conf

linux:/home/kathleen # iptables -L
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
input_ext all -- anywhere anywhere
LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-IN-ILL-TARGET '
DROP all -- anywhere anywhere

Chain FORWARD (policy DROP)
target prot opt source destination
LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-FWD-ILL-ROUTING '

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere state NEW,RELATED,ESTABLISHED
LOG all -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-OUT-ERROR '

Chain forward_ext (0 references)
target prot opt source destination

Chain input_ext (1 references)
target prot opt source destination
DROP all -- anywhere anywhere PKTTYPE = broadcast
ACCEPT icmp -- anywhere anywhere icmp source-quench
ACCEPT icmp -- anywhere anywhere icmp echo-request
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp echo-reply
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp destination-unreachable
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp time-exceeded
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp parameter-problem
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp timestamp-reply
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp address-mask-reply
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp protocol-unreachable
ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp redirect
reject_func tcp -- anywhere anywhere tcp dpt:ident state NEW
LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp flags:SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
LOG icmp -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
LOG udp -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
LOG all -- anywhere anywhere limit: avg 3/min burst 5 state INVALID LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT-INV '
DROP all -- anywhere anywhere

Chain reject_func (1 references)
target prot opt source destination
REJECT tcp -- anywhere anywhere reject-with tcp-reset
REJECT udp -- anywhere anywhere reject-with icmp-port-unreachable
REJECT all -- anywhere anywhere reject-with icmp-proto-unreachable

linux:/home/kathleen # iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination

Chain POSTROUTING (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
linux:/home/kathleen #


Bin ein absoluter Neuling in Sachen Linux und würde mich freuen wenn ihr mir irgendwie weiterhelfen könnt.
 

Grothesk

Ultimate Guru
Ui.
Das mit den vielen Logs ist ja nettgemeint...
Aber reduzier das doch bitte auf das notwendige... Werte deiner Netzwerkkarte spielen für das Modem keine Rolle...

Wenn ich das richtig sehe, ist in den neuesten Kerneln da einiges gepatched worden, was dein Modem angeht. Vielleicht probierst du mal die Suse 10.0 aus? Die ist ja etwas aktueller als 9.3.
Oder du versuchst einen neuen Kernel in deine 9.3 zu packen.
 
OP
F

Fibsischen

Newbie
Wie mache ich das einen neuen Kernel da rein zu packen?
Oder ist es besser ich hole mir Suse 10.0 und aktualisiere 9.3 so?
:?
 
Oben