A
Anonymous
Gast
hallo,
ich hab folgendes problem....
meine windowskiste bekommt kein internet....obwohl die tcp/ip kommunikation geht....
ich habe den dhcp eingerichtet und er läuft....alle ping versuche funktionieren vom server aus....
der lan client kann auch den server pingen....doch wenn ich den dns server meines internetprovider vom lan client pingen will....spuckt dieser "host unknown" aus....
hier ist meine dhcpd.conf:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
#
option broadcast-address 192.168.1.255;
option subnet-mask 255.255.255.0;
option domain-name-servers 62.2.24.162, 62.2.17.60;
option routers 192.168.1.1;
#
# if you do not use dynamical DNS updates:
#
# this statement is needed by dhcpd-3 needs at least this statement.
# you have to delete it for dhcpd-2, because it does not know it.
#
# if you want to use dynamical DNS updates, you should first read
# read /usr/share/doc/packages/dhcp-server/DDNS-howto.txt
#
ddns-update-style none;
#
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.128 192.168.1.254;
default-lease-time 86400;
max-lease-time 86400;
}
#
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
group {
host bad3 {
hardware ethernet 00:0E:A6:6C:09:79;
fixed-address 192.168.1.11;
}
}
meine Frage ist nun, was da nicht stimmt.....?
p.s. eth0 ist listening to the net und eth1 is listening to eth0, es wäre soweit alles korrekt ?? der client gibt auch alle vom dhcp zugewiesenen einstellungen richtig aus....
danke für die geduld mit linux newbies
ich hab folgendes problem....
meine windowskiste bekommt kein internet....obwohl die tcp/ip kommunikation geht....
ich habe den dhcp eingerichtet und er läuft....alle ping versuche funktionieren vom server aus....
der lan client kann auch den server pingen....doch wenn ich den dns server meines internetprovider vom lan client pingen will....spuckt dieser "host unknown" aus....
hier ist meine dhcpd.conf:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
#
option broadcast-address 192.168.1.255;
option subnet-mask 255.255.255.0;
option domain-name-servers 62.2.24.162, 62.2.17.60;
option routers 192.168.1.1;
#
# if you do not use dynamical DNS updates:
#
# this statement is needed by dhcpd-3 needs at least this statement.
# you have to delete it for dhcpd-2, because it does not know it.
#
# if you want to use dynamical DNS updates, you should first read
# read /usr/share/doc/packages/dhcp-server/DDNS-howto.txt
#
ddns-update-style none;
#
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.128 192.168.1.254;
default-lease-time 86400;
max-lease-time 86400;
}
#
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
group {
host bad3 {
hardware ethernet 00:0E:A6:6C:09:79;
fixed-address 192.168.1.11;
}
}
meine Frage ist nun, was da nicht stimmt.....?
p.s. eth0 ist listening to the net und eth1 is listening to eth0, es wäre soweit alles korrekt ?? der client gibt auch alle vom dhcp zugewiesenen einstellungen richtig aus....
danke für die geduld mit linux newbies
