• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

SuseFirewall2 mit ISDN

D

darkangel2k

Member
Hallo Leute!!
Die Such-Fkt hier hat mich leider nicht schlauer gemacht.
Also, ich wähle mich über T-Online mit kinternet (Suse9.1Prof) ein.
Ohne Firewall kein Problem, wenn ich sie einschalte, findet er 1. nicht den Nameserver (in kinternet).
2. Kann ich keine Homepages betrachten.

Die Firewall ist auf ippp0 konfiguriert, und lässt nur SSH zu.

Hilfe!!
Was mache ich nur falsch??
Was bedeutet die ständige resolv.conf - Warnung??

Hier mal nen Auszug aus meiner Boot.MSG:

Code: 
Setting up ISDN card contr0 AVM FRITZ!Card PCIdone
Loading Driver contr0 hisaxdone
Starting Firewall Initialization (phase 1 of 3) done
<notice>exit status of (random isdn hotplug SuSEfirewall2_init) is (0 0 0 0)
<notice>start services (coldplug)
coldplug scanning input: done
         scanning pci: *WWWWW******W*.**WWdone
         scanning usb: done
         .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
    lo       
    lo        IP address: 127.0.0.1/8   
Warning: /etc/resolv.conf not found

 Warning: No interface active (yet?)done    eth0      device: nVidia Corporation nForce2 Ethernet Controller (rev a1)
    eth0      configuration: eth-id-00:0e:a6:21:1b:2a
    eth0      IP address: 192.168.1.1/24   
Warning: /etc/resolv.conf not found

 Warning: No interface active (yet?)done    ippp0    
    ippp0     Startmode is 'manual'
skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (smbfs SuSEfirewall2_setup)
Mount SMB File System unused
Starting Firewall Initialization (phase 2 of 3) Warning: /etc/resolv.conf not found

 Warning: No interface active (yet?)done
<notice>exit status of (smbfs SuSEfirewall2_setup) is (6 0)
<notice>start services (splash_early resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting resource managerdone
Starting RPC portmap daemondone
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) Backgrounding to notify hosts...
done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd smpppd powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SMPPPDdone
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done
Starting sound driver:  intel8x0done
Restoring the previous sound settingdone
<notice>exit status of (sshd smpppd powersaved fbset alsasound) is (0 0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial (K
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=0 sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting Name Service Cache Daemondone
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=45 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=64 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=0 sscripts=47 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
<notice>start services (SuSEfirewall2_final)
Starting Firewall Initialization (phase 3 of 3) Warning: /etc/resolv.conf not found

 Warning: No interface active (yet?)done
<notice>exit status of (SuSEfirewall2_final) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(734,3)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben