Das analoge Modem Devolo Microlink 56k Fun USB wird in der SUSE Datenbank als full supported gelistet. Dennoch gelingt mir die Einwahl nicht. Wer hat hilfreiche Hinweise (idealerweise eigene Erfahrungen). Randnotiz: Von SUSE bekomme ich keine Hilfestellung.
Vielen Dank
Das Einwahlprotokoll sieht so aus:
SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT019102345
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT019102345
pppd[0]: CONNECT 42667
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: NO CARRIER
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Using interface ppp0
Status is: connecting
pppd[0]: Connect: ppp0 <--> /dev/ttySL0
Vielen Dank
Das Einwahlprotokoll sieht so aus:
SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT019102345
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT019102345
pppd[0]: CONNECT 42667
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: NO CARRIER
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Using interface ppp0
Status is: connecting
pppd[0]: Connect: ppp0 <--> /dev/ttySL0