Uwe.Lü
Hacker
Hallo Linux-Gemeide,
Bei mir läuft seit Wochen Leap15.0 ohne Probleme - bis heute morgen. Zur Erklärung, gestern habe ich mal wieder mit geparted eine Datensicherung meiner Daten gemacht. Diese war bei Arbeitsschluss noch nicht fertig, so das ich mit dem Befehl shutdown 0:00 die Maschine um 0 Uhr herunter fahren ließ.
Heute morgen rödelte der Rechner eine weile rum und landete auf der Konsole. Also habe ich mit der Installations-DVD ein Upgrade gemacht und dabei wurden ca. 10 Dateien neu installiert. Danach wieder alles schön, bis auf das LAN.
Es wäre schön, wenn einer von Euch sich des Themas annehmen könnte.
Danke. Uwe
Bei mir läuft seit Wochen Leap15.0 ohne Probleme - bis heute morgen. Zur Erklärung, gestern habe ich mal wieder mit geparted eine Datensicherung meiner Daten gemacht. Diese war bei Arbeitsschluss noch nicht fertig, so das ich mit dem Befehl shutdown 0:00 die Maschine um 0 Uhr herunter fahren ließ.
Heute morgen rödelte der Rechner eine weile rum und landete auf der Konsole. Also habe ich mit der Installations-DVD ein Upgrade gemacht und dabei wurden ca. 10 Dateien neu installiert. Danach wieder alles schön, bis auf das LAN.
Das sagt collectNWData - und nun?Code:collectNWData.sh V0.7.5.8 2016/05/22/15:43:21 - e8982e6 This program comes with ABSOLUTELY NO WARRANTY; This is free software, and you are welcome to redistribute it under certain conditions --- Welcher Netzwerkverbindungtyp soll getestet werden? --- (2) Kabelgebundene Verbindung --- Welche Netzwerktopologie liegt vor? --- (2) DSL HW router <---> LinuxClient --- Auf welchem Rechner wird das Script ausgeführt? --- (1) LinuxClient --- NWCollect sammelt Netzwerkkonfigurationsinformationen in Datei collectNWData.txt ... --- NWEliza untersucht das System nach häufigen Netzwerkkonfigurationsfehlern ... --- Keine offensichtlichen Konfigurationsfehler/-warnungen gefunden. Die Datei collectNWData.txt im bevorzugten Linux Forum posten und http://www.linux-tips-and-tricks.de/CND_UPL lesen. --- Wenn eigene Lösungsversuche erfolglos waren dann den Inhalt der Datei collectNWData.txt im Netz ablegen --- (Links siehe http://www.linux-tips-and-tricks.de/CND_UPL) --- und dann der nopaste Link im bevorzugten Linux Forum posten. ================================================================================================================== ===== cat /etc/*[-_]release || cat /etc/*[-_]version ============================================================= /etc/os-release NAME="openSUSE Leap" VERSION="15.0" ID="opensuse-leap" ID_LIKE="suse opensuse" VERSION_ID="15.0" PRETTY_NAME="openSUSE Leap 15.0" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:leap:15.0" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" ===== uname -a =================================================================================================== Linux linux1 4.12.14-lp150.12.4-default #1 SMP Tue May 22 05:17:22 UTC 2018 (66b2eda) x86_64 x86_64 x86_64 GNU/Linux ===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================ --- /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='dhcp' DHCLIENT_SET_DEFAULT_ROUTE='yes' IFPLUGD_PRIORITY='0' NAME=@@@@@@ STARTMODE='ifplugd' ZONE=public --- /etc/sysconfig/network/ifcfg-eth0.bak BOOTPROTO='dhcp' DHCLIENT_SET_DEFAULT_ROUTE='yes' IFPLUGD_PRIORITY='0' NAME=@@@@@@ STARTMODE='ifplugd' ZONE=external --- /etc/sysconfig/network/ifcfg-wlan1 BOOTPROTO='dhcp' DHCLIENT_SET_DEFAULT_ROUTE='yes' IFPLUGD_PRIORITY='0' NAME=@@@@@@ STARTMODE='ifplugd' WIRELESS_AP_SCANMODE='1' WIRELESS_AUTH_MODE='open' WIRELESS_BITRATE='auto' WIRELESS_DEFAULT_KEY=@@@@@@ WIRELESS_ESSID=@@@@@@ WIRELESS_KEY_0=@@@@@@ WIRELESS_KEY_LENGTH=@@@@@@ WIRELESS_MODE='Managed' WIRELESS_POWER='no' ZONE= --- /etc/sysconfig/network/ifcfg-wlan1.bak BOOTPROTO='dhcp' DHCLIENT_SET_DEFAULT_ROUTE='yes' IFPLUGD_PRIORITY='0' NAME=@@@@@@ STARTMODE='ifplugd' WIRELESS_AP_SCANMODE='1' WIRELESS_AUTH_MODE='open' WIRELESS_BITRATE='auto' WIRELESS_DEFAULT_KEY=@@@@@@ WIRELESS_ESSID=@@@@@@ WIRELESS_KEY_0=@@@@@@ WIRELESS_KEY_LENGTH=@@@@@@ WIRELESS_MODE='Managed' WIRELESS_POWER='no' ZONE=external ===== ping tests ================================================================================================= Ping of 8.8.8.8 OK Ping of www.google.com OK ===== cat /etc/resolv | grep -i "nameserver" ===================================================================== nameserver 192.168.2.50 ===== cat /etc/hosts ============================================================================================= 127.0.0.1 localhost ===== (route -n && route -A inet6 -n) | egrep "(en|wl|eth|ath|ra|wlan|dsl|ppp)" ================================== Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 20100 0 0 eth0 0.0.0.0 192.168.2.1 0.0.0.0 UG 20600 0 0 wlan1 192.168.2.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 192.168.2.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan1 Kernel IPv6 Routentabelle fe80::/64 :: U 100 1 0 eth0 fe80::/64 :: U 256 1 468 wlan1 fe80::/64 :: U 256 1 0 eth0 fe80::/64 :: U 600 1 0 wlan1 ff00::/8 :: U 256 9 295 wlan1 ff00::/8 :: U 256 2 3 eth0 ===== ifconfig (filtered for en|wl|eth|wlan|ra|ath|dsl|ppp) ====================================================== eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.2.109 netmask 255.255.255.0 broadcast 192.168.2.255 inet6 fe80::c915:9df2:eb12:7fd prefixlen 64 scopeid 0x20<link> ether ##:##:##:##:##:#1 txqueuelen 1000 (Ethernet) RX packets 52306 bytes 70942620 (67.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 31152 bytes 3019530 (2.8 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 wlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.2.114 netmask 255.255.255.0 broadcast 192.168.2.255 inet6 fe80::13a1:b1a2:2a93:4cad prefixlen 64 scopeid 0x20<link> ether ##:##:##:##:##:#2 txqueuelen 1000 (Ethernet) RX packets 79076 bytes 89411830 (85.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 58325 bytes 7462776 (7.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ===== lspci ====================================================================================================== 07:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 20) Subsystem: Foxconn International, Inc. Device [105b:e08e] Kernel driver in use: ath10k_pci -- 08:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01) Subsystem: Acer Incorporated [ALI] Device [1025:091d] Kernel driver in use: tg3 ===== lsusb | grep -v "root hub" ================================================================================= Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 003 Device 005: ID 04f2:b474 Chicony Electronics Co., Ltd Bus 003 Device 004: ID 06cb:2970 Synaptics, Inc. touchpad Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 006: ID 0489:e092 Foxconn / Hon Hai Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse ===== hwinfo (filtered) ========================================================================================== 08: PCI 700.0: 0282 WLAN controller Model: "Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter" Vendor: pci 0x168c "Qualcomm Atheros" Device: pci 0x003e "QCA6174 802.11ac Wireless Network Adapter" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0xe08e Driver: "ath10k_pci" Driver Modules: "ath10k_pci" Device File: wlan1 Link detected: yes Driver Status: ath10k_pci is active Driver Activation Cmd: "modprobe ath10k_pci" 20: PCI 800.0: 0200 Ethernet controller Model: "Broadcom NetLink BCM57780 Gigabit Ethernet PCIe" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1692 "NetLink BCM57780 Gigabit Ethernet PCIe" SubVendor: pci 0x1025 "Acer Incorporated [ALI]" SubDevice: pci 0x091d Driver: "tg3" Driver Modules: "tg3" Device File: eth0 Link detected: yes Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" ===== lsmod (filtered) =========================================================================================== | ac | acer_wmi | aesni_intel | aes_x86_64 | af_packet | | ahci | arc4 | ath10k_core | ath10k_pci | ath | | bcm_phy_lib | bnep | broadcom | ccm | cfg80211 | | cifs | cmac | coretemp | dm_multipath | dns_resolver | | drm | drm_kms_helper | drm_panel_orientation_quirks| ebtable_broute | ebtable_filter | | ebtable_nat | ebtables | ecdh_generic | efivarfs | ehci_hcd | | ehci_pci | fb_sys_fops | fscache | ghash_clmulni_intel| glue_helper | | hid_generic | hid_multitouch | i2c_algo_bit | i2c_i801 | i915 | | ie31200_edac | intel_powerclamp| intel_rapl | ipmi_devintf | ipmi_msghandler | | ip_set | ip_tables | irqbypass | iscsi_boot_sysfs| iscsi_ibft | | kvm | kvm_intel | libahci | libphy | llc | | lpc_ich | mac80211 | mei | mei_me | memstick | | mmc_core | msr | nfnetlink | pcbc | pps_core | | ptp | rfcomm | rfkill | rtsx_usb | rtsx_usb_ms | | rtsx_usb_sdmmc | scsi_dh_alua | scsi_dh_emc | scsi_dh_rdac | serio_raw | | sg | shpchp | sparse_keymap | sr_mod | stp | | syscopyarea | sysfillrect | sysimgblt | tg3 | wmi | | xfs | xhci_hcd | xhci_pci | ===== egrep 'en|wl|eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==== /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1" /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" ================================================================================================================== *** NWElizaStates PNIN:1 CFR:1 IF:wlan1 IM:1 DI:1 FALON:1 NI:1 cNI:1 NIWD:0 IP6:0 WLW:0 RTDT:Unknown GUI:0 UID:0
Es wäre schön, wenn einer von Euch sich des Themas annehmen könnte.
Danke. Uwe