Download Problem [gelöst]

mafg · 22 Sep. 2013

Hallo!

Ich habe hier ein openSUSE 12.2 64bit System, dass eigentlich ganz schnuckelig läuft. Allerdings bleiben einige Downloads einfach immer hängen.
Z.B. diese 4 updates,

Code:

Loading repository data...
Reading installed packages...
S | Repository                            | Name         | Current Version | Available Version | Arch  
--+---------------------------------------+--------------+-----------------+-------------------+-------
v | openSUSE-12.2-Update                  | kdelibs4     | 4.8.5-2.28.2    | 4.8.5-2.32.1      | x86_64
v | openSUSE BuildService - Bildungswesen | libopencv2_4 | 2.4.6.1-72.2    | 2.4.6.1-72.3      | x86_64
v | openSUSE-12.2-Update                  | python       | 2.7.3-3.6.1     | 2.7.3-3.9.1       | x86_64
v | openSUSE-12.2-Update                  | python-base  | 2.7.3-3.6.1     | 2.7.3-3.9.1       | x86_64
v | openSUSE-12.2-Update                  | python-xml   | 2.7.3-3.6.1     | 2.7.3-3.9.1       | x86_64
v | Packman Repository                    | transcode    | 1.1.5-110.1     | 1.1.5-110.3       | x86_64

die egal von welchem mirror einfach nicht auf meinen Rechner kommen wollen.
Außerdem wollte ich den Citrix Receiver installieren, der aber auch nach 75% den Download einstellt.

Das sieht jedesmal so aus, dass der Download beginnt und an immer derselben Stelle die Übertragungsrate auf 0byte/s abfällt und da bleibt.

Die Systemanalyse mit colletNWData ergibt, dass ipv6 aktiviert ist, wobei ich das nicht nachvollziehen kann, da
ifconfig

Code:

eth0      Link encap:Ethernet  HWaddr 00:04:76:10:CE:B4  
          inet addr:192.168.178.28  Bcast:192.168.178.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
          RX packets:14102 errors:0 dropped:0 overruns:1 frame:0
          TX packets:10234 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:19006925 (18.1 Mb)  TX bytes:982597 (959.5 Kb)
          Interrupt:20 Base address:0xc000

keine ipv6 Adresse ausgibt und in YAST ipv6 auch deaktiviert ist.

Ein ähnliches Problem hatte ich vor kurzem schon mal hier gepostet, dass aber nach Umstellung der Konfiguration von Nezworkmanager auf ifup zunächst gelöst schien.

Hat noch jemand eine Idee?
Danke!

spoensche · 22 Sep. 2013

Poste mal die vollständige Ausgabe des Scripts

mafg · 24 Sep. 2013

Hier ist der Output von collectNWData

Code:

collectNWData_003.sh V0.6.12 (Rev: 1.369, Build: 2013/06/21 20:58:30 UTC)

--- Which type of your network connection should be tested?
--- (2) Wired connection

--- What's the type of networktopology?
--- (2) DSL HW router <---> LinuxClient

--- On which host is the script executed?
--- (1) LinuxClient

--- NWEliza is analyzing the system for common network configuration errors ...

!!! CND0230I: IPV6 enabled
!!! CND0310W: Classic network configuration with ifup was detected. Configuration with networkmanager is easier
--- Go to http://www.linux-tips-and-tricks.de/CND#English to get more detailed instructions 
--- about the error/warning messages and how to fix the problems on your own.

--- If you are unsuccessful then place the contents of file in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL#English for links) 
--- and then paste the nopaste link on your favorite Linux forum.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/SuSE-release
/etc/os-release
openSUSE 12.2 (x86_64)
VERSION = 12.2
CODENAME = Mantis
NAME=openSUSE
VERSION="12.2 (Mantis)"
VERSION_ID="12.2"
PRETTY_NAME="openSUSE 12.2 (Mantis) (x86_64)"
ID=opensuse
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:opensuse:12.2"
===== uname -a ===================================================================================================
Linux linux-sauc 3.4.47-2.38-desktop #1 SMP PREEMPT Fri May 31 20:17:40 UTC 2013 (3961086) x86_64 x86_64 x86_64 GNU/Linux
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp4'
STARTMODE='auto'
NAME='3c905C-TX/TX-M [Tornado]'
MTU='1492'
USERCONTROL='yes'
===== ping tests =================================================================================================
Ping of 173.194.35.176 OK
Ping of www.google.com OK
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.178.1
===== cat /etc/hosts =============================================================================================
127.0.0.1	localhost
===== (route -n && route -A inet6 -n) | egrep "(eth|ath|ra|wlan|dsl|ppp)" ========================================
0.0.0.0         192.168.178.1   0.0.0.0         UG    0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
192.168.178.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
===== ifconfig (filtered for eth|wlan|ra|ath|dsl|ppp) ============================================================
eth0      Link encap:Ethernet  HWaddr ##:##:##:##:##:#1  
          inet addr:192.168.178.28  Bcast:192.168.178.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
          RX packets:14029 errors:0 dropped:0 overruns:1 frame:0
          TX packets:10200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:18968611 (18.0 Mb)  TX bytes:975716 (952.8 Kb)
          Interrupt:20 Base address:0xc000 
===== lspci ======================================================================================================
02:06.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
	Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000]
	Kernel driver in use: 3c59x
===== lsusb | grep -v "root hub" =================================================================================
===== hwinfo (filtered) ==========================================================================================
29: PCI 206.0: 0200 Ethernet controller
  Model: "3Com 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC"
  Vendor: pci 0x10b7 "3Com Corporation"
  Device: pci 0x9200 "3c905C-TX/TX-M [Tornado]"
  SubVendor: pci 0x10b7 "3Com Corporation"
  SubDevice: pci 0x1000 "3C905CX-TX/TX-M Fast Etherlink for PC Management NIC"
  Driver: "3c59x"
  Driver Modules: "3c59x"
  Device File: eth0
  Link detected: yes
    Driver Status: 3c59x is active
    Driver Activation Cmd: "modprobe 3c59x"
===== lsmod (filtered) ===========================================================================================
| 3c59x           | af_packet       | drm             | drm_kms_helper  | edac_core        |
| edac_mce_amd    | i2c_algo_bit    | i2c_piix4       | ip_tables       | k10temp          |
| microcode       | mperf           | pci_hotplug     | powernow_k8     | scsi_dh          |
| scsi_dh_alua    | scsi_dh_emc     | scsi_dh_hp_sw   | scsi_dh_rdac    | serio_raw        |
| sg              | shpchp          | sp5100_tco      | sr_mod          | ttm              |
| wmi             |
===== egrep 'eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==========
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** NWElizaStates V0.6.12
IF:eth0 IM:2 DI:1 FALON:1 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:0 NISS:0 IP6:1 KM:0 WLW:0 RTDT:SuSE GUI:0 UID:0

spoensche · 25 Sep. 2013

Versuch mal, ob du das jeweilige Paket ganz normal per Browser von http://download.opensuse.org/update/12.2/ downloaden kannst.
Bleibt der Download dann auch hängen? Tritt das Problem auch bei anderen Downloads auf? (z.B, beim Download eines ISO-Images)

Poste bitte mal die Ausgabe von

Code:

dmesg | egrep -i "err|warn|fail|fault|crit"

mafg · 26 Sep. 2013

Der manuelle Download von http://download.opensuse.org/update/12.2/x86_64/ bleibt ebenfalls hängen.
Weitere nicht beendete Downloads sind
http://download.citrix.com.edgesuite.net/akdlm/7044/ICAClient_12.1.0-0.x86_64.rpm
http://ftp4.gwdg.de/pub/opensuse/distribution/12.3/iso/openSUSE-12.3-NET-x86_64.iso

Hier ist die Ausgabe von

Code:

dmesg | egrep -i "err|warn|fail|fault|crit"

Code:

[    0.000000] MTRR default type: uncachable
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.001000] Fast TSC calibration failed
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.622566] ACPI: Using IOAPIC for interrupt routing
[    0.942733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.942932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.942977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.943010]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.952103] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952141] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952177] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952212] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952248] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952320] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.952355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.961275] NetLabel:  unlabeled traffic allowed by default
[    1.587929] PCI: CLS 64 bytes, default 64
[    1.821619] io scheduler cfq registered (default)
[    3.337202] [drm] radeon defaulting to kernel modesetting.
[   15.011788] microcode: failed to load file amd-ucode/microcode_amd.bin
[   15.205460] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[   15.210510]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   15.210511]  (Note that use of the override may cause unknown side effects.)
[   15.271170] ALSA patch_realtek.c:1271 SKU: override=0x1
[ 2247.133425] PK-Backend[3190] general protection ip:7ff0c755c590 sp:7ff0c0a25828 error:0 in libpk_backend_zypp.so[7ff0c751e000+47000]

Gruß,
mafg

Sauerland · 26 Sep. 2013

Poste einmal:

Code:

zypper lr -uP

spoensche · 26 Sep. 2013

Code:

PK-Backend[3190] general protection ip:7ff0c755c590 sp:7ff0c0a25828 error:0 in libpk_backend_zypp.so[7ff0c751e000+47000]

Deaktiviere mal den Package Kit Dienst und danach führst du das Update mit zypper erneut durch.

mafg · 26 Sep. 2013

Vielen Dank für die Hinweise!

Die Pakete habe ich von unterschiedlichen Mirrors versucht, herunter zu laden. Leider ohne Erfolg.

Code:

linux-sauc:~ # zypper lr -uP                                                                                                                                                                               
#  | Alias                             | Name                                    | Enabled | Refresh | Priority | URI                                                                                      
---+-----------------------------------+-----------------------------------------+---------+---------+----------+-----------------------------------------------------------------------------             
 7 | packman.inode.at-suse             | Packman Repository                      | Yes     | Yes     |   50     | http://packman.jacobs-university.de/suse/12.2/                                           
 3 | download.opensuse.org-Stable      | openSUSE BuildService - LibreOffice     | Yes     | Yes     |   75     | http://download.opensuse.org/repositories/LibreOffice:/Stable/openSUSE_12.2/             
 4 | download.opensuse.org-UpdatedApps | openSUSE BuildService - KDE:UpdatedApps | Yes     | Yes     |   75     | http://download.opensuse.org/repositories/KDE:/UpdatedApps/openSUSE_12.2/   
 5 | download.opensuse.org-mozilla     | openSUSE BuildService - Mozilla         | Yes     | Yes     |   75     | http://download.opensuse.org/repositories/mozilla/openSUSE_12.2/            
13 | repo-update                       | openSUSE-12.2-Update                    | Yes     | Yes     |   80     | http://ftp5.gwdg.de/pub/linux/suse/opensuse/update/12.2/                    
14 | repo-update-non-oss               | openSUSE-12.2-Update-Non-Oss            | Yes     | Yes     |   80     | http://ftp5.gwdg.de/pub/linux/suse/opensuse/update/12.2-non-oss/            
 1 | Medical                           | Medical                                 | Yes     | Yes     |   90     | http://download.opensuse.org/repositories/medical/openSUSE_12.2/            
 2 | download.opensuse.org-Education   | openSUSE BuildService - Bildungswesen   | Yes     | Yes     |   90     | http://download.opensuse.org/repositories/Education/openSUSE_12.2/          
 6 | openSUSE-12.2-1.6                 | openSUSE-12.2-1.6                       | Yes     | Yes     |   99     | http://download.opensuse.org/distribution/12.2/repo/oss/                    
 8 | repo-debug                        | openSUSE-12.2-Debug                     | No      | Yes     |   99     | http://download.opensuse.org/debug/distribution/12.2/repo/oss/              
 9 | repo-debug-update                 | openSUSE-12.2-Update-Debug              | No      | Yes     |   99     | http://download.opensuse.org/debug/update/12.2/                             
10 | repo-debug-update-non-oss         | openSUSE-12.2-Update-Debug-Non-Oss      | No      | Yes     |   99     | http://download.opensuse.org/debug/update/12.2-non-oss/                     
11 | repo-non-oss                      | openSUSE-12.2-Non-Oss                   | Yes     | Yes     |   99     | http://download.opensuse.org/distribution/12.2/repo/non-oss/                
12 | repo-source                       | openSUSE-12.2-Source                    | No      | Yes     |   99     | http://download.opensuse.org/source/distribution/12.2/repo/oss/

Deaktivieren von Packagekit hat leider nicht die Lösung gebracht.

Gruß,
mafg

Heinz-Peter · 27 Sep. 2013

mafg schrieb:
Deaktivieren von Packagekit hat leider nicht die Lösung gebracht.

Hast du deine Verbindung schon getestet? z.B. hier http://dsl-speedtest.computerbild.de/
Grüße Heinz-Peter

Edit: Eventuell mit dem Befehl

Code:

top

überprüfen was im Hintergrund den Prozessor beschäftigt.

mafg · 29 Sep. 2013

Heinz-Peter schrieb:
Hast du deine Verbindung schon getestet? z.B. hier http://dsl-speedtest.computerbild.de/

Die Verbindung ist ansonsten perfekt. Es bleiben nur einige Downloads hängen, während andere völlige problemlos auf den Rechner kommen. :???:

Code:
Edit: Eventuell mit dem Befehl

Code:

top

überprüfen was im Hintergrund den Prozessor beschäftigt.

Der Prozessor ist nicht ausgelastet.

Gruß,
mafg

spoensche · 29 Sep. 2013

Boote mal mit der Bootoption

Code:

acpi_os=Linux

mafg · 1 Okt. 2013

spoensche schrieb:
Boote mal mit der Bootoption

Code:

acpi_os=Linux

Das hat leider auch keine Abhilfe gebracht. Bei der Gelegenheit habe ich es auch mal im failsafe modus probiert. Leider auch frustran. :nosmile:

spoensche · 2 Okt. 2013

Ok, wie siehts mit der Bootoption

Code:

acpi_enforce_resources=lax

? Wenn du mit diesem Parameter gebootet hast, dann poste bitte mal die Ausgabe von

Code:

dmesg | egrep -i "err|warn|fail|fault|crit|acpi"

mafg · 2 Okt. 2013

Hallo!
Langsam bin ich echt gespannt, ob sich dieses Problem lösen lässt...

Nach booten mit

Code:

acpi_enforce_resources=lax

Code:

matthias@linux-sauc:~> dmesg | egrep -i "err|warn|fail|fault|crit|acpi"
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.47-2.38-desktop root=UUID=01c22361-406d-490e-8225-a4d8ab33f1b3 video=1440x900 resume=/dev/disk/by-id/ata-ST3160812AS_5LS1EM6K-part1 splash=silent quiet showopts acpi_enforce_resources=lax
[    0.000000]  BIOS-e820: 00000000afdf0000 - 00000000afdf3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afdf3000 - 00000000afe00000 (ACPI data)
[    0.000000] MTRR default type: uncachable
[    0.000000] ACPI: RSDP 00000000000f7750 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000afdf3000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000afdf3080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000afdf3100 06398 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000afdf0000 00040
[    0.000000] ACPI: SSDT 00000000afdf9580 0095E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: MSDM 00000000afdf9f00 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000afdf9f80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000afdf9fc0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 00000000afdfa000 000A2 (v01 GBT    GBT   B0 5455312E BG?? 45240101)
[    0.000000] ACPI: APIC 00000000afdf94c0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.47-2.38-desktop root=UUID=01c22361-406d-490e-8225-a4d8ab33f1b3 video=1440x900 resume=/dev/disk/by-id/ata-ST3160812AS_5LS1EM6K-part1 splash=silent quiet showopts acpi_enforce_resources=lax
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.003423] ACPI: Core revision 20120320
[    0.158998] PM: Registering ACPI NVS region [mem 0xafdf0000-0xafdf2fff] (12288 bytes)
[    0.159321] ACPI: bus type pci registered
[    0.177085] ACPI: Added _OSI(Module Device)
[    0.177087] ACPI: Added _OSI(Processor Device)
[    0.177089] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177090] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177726] ACPI: EC: Look up EC in DSDT
[    0.181990] ACPI: Interpreter enabled
[    0.181993] ACPI: (supports S0 S3 S4 S5)
[    0.182010] ACPI: Using IOAPIC for interrupt routing
[    0.186561] ACPI: No dock devices found.
[    0.186566] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.186625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.188401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.188601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.188646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.188676]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.188679]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.188680] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.197776] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197851] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.197996] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.198031] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.198439] PCI: Using ACPI for IRQ routing
[    0.206942] NetLabel:  unlabeled traffic allowed by default
[    0.211149] pnp: PnP ACPI init
[    0.211164] ACPI: bus type pnp registered
[    0.211337] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.211416] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212387] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212507] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.212585] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.212629] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.212656] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.212690] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.212990] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.213072] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.213126] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.213189] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.213441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.213461] pnp: PnP ACPI: found 13 devices
[    0.213462] ACPI: ACPI bus type pnp unregistered
[    0.534330] PCI: CLS 64 bytes, default 64
[    0.768052] io scheduler cfq registered (default)
[    2.296289] [drm] radeon defaulting to kernel modesetting.
[   12.082602] microcode: failed to load file amd-ucode/microcode_amd.bin
[   12.082777] microcode: failed to load file amd-ucode/microcode_amd.bin
[   12.211717] ACPI: Power Button [PWRB]
[   12.212017] ACPI: Power Button [PWRF]
[   12.354111]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   12.354112]  (Note that use of the override may cause unknown side effects.)
[   12.354196] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[   12.354201] ACPI: This conflict may cause random problems and system instability
[   12.354202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.398954] ALSA patch_realtek.c:1271 SKU: override=0x1
[   33.825604] pci 0000:00:14.4: wake-up capability enabled by ACPI

josef-wien · 2 Okt. 2013

Als Laie stört mich die (aus drivers/edac/amd64_edac.c stammende) Meldung (die erste Zeile fehlt durch den grep-Filter):

Code:

[            ] ECC disabled in the BIOS or no ECC capability, module will not load.
[   15.210510]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   15.210511]  (Note that use of the override may cause unknown side effects.)

Ist da ein "falscher" Speicher am Werk?

mafg · 3 Okt. 2013

von http://www.bios-info.de/4p92x846/befe.htm
stammt diese Information

ECC Check oder ECC Control
Die neueren Boards mit HX-Chipsatz sind wieder verstärkt mit Fehlererkennung und Fehlerkorrektur (Error Correction Code) von Speicherfehlern ausgestattet. Sie schalten hier lediglich die Option ein damit die Fehlererkennung aktiv wird. Vor allem beim Netzwerkserver sollte die Option verwendet werden. Nicht verwendet dagegen bei herkömmlichen Speichern (z.B. 2M x 32).

Das lässt mich, ebenfalls als Laie, annehmen, dass ich im Bios die Funktion deaktiviert habe und darum auch das entsprechende Modul nicht geladen wird. Nach allem, was ich auch aus anderen Quellen bezogen habe, scheint diese Funktion für einfache Desktopsysteme auch verzichtbar zu sein.

josef-wien · 3 Okt. 2013

mafg schrieb:
Das lässt mich ... annehmen

Niemand außer Dir kann das wissen, und nur Wissen nützt. Im übrigen ist das BIOS-Kompendium uralt.

Hast Du den Hauptspeicher ausführlich mit memtest geprüft, um ihn als Ursache auszuschalten?

Was ergibt als root:

Code:

dmidecode -t 2 -t memory

mafg · 5 Okt. 2013

josef-wien schrieb:
Niemand außer Dir kann das wissen, und nur Wissen nützt. Im übrigen ist das BIOS-Kompendium uralt.

ECC ist deaktivert. Auch wenn das Kompendium uralt ist, hat sich an der Information an sich in der Zwischenzeit nichts geändert.

Memtest läuft ohne Fehlermeldungen durch.

Code:

linux-sauc:~ # dmidecode -t 2 -t memory
# dmidecode 2.11
SMBIOS 2.4 present.

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
        Manufacturer: Gigabyte Technology Co., Ltd.
        Product Name: GA-78LMT-S2P
        Version: x.x
        Serial Number:  

Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
        Error Detecting Method: 64-bit ECC
        Error Correcting Capabilities:
                None
        Supported Interleave: One-way Interleave
        Current Interleave: One-way Interleave
        Maximum Memory Module Size: 4096 MB
        Maximum Total Memory Size: 8192 MB
        Supported Speeds:
                70 ns
                60 ns
                50 ns
        Supported Memory Types:
                Standard
                DIMM
        Memory Module Voltage: 2.9 V
        Associated Memory Slots: 2
                0x0006
                0x0007
        Enabled Error Correcting Capabilities:
                None

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: A0
        Bank Connections: 1
        Current Speed: 42 ns
        Type: Other Unknown EDO
        Installed Size: 4096 MB (Single-bank Connection)
        Enabled Size: 4096 MB (Single-bank Connection)
        Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: A1
        Bank Connections: 2
        Current Speed: 144 ns
        Type: Other Unknown EDO
        Installed Size: Not Installed
        Enabled Size: Not Installed
        Error Status: OK

Handle 0x0020, DMI type 16, 15 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 8 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2

Handle 0x0021, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0020
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 4096 MB
        Form Factor: DIMM
        Set: None
        Locator: A0
        Bank Locator: Bank0/1
        Type: Unknown
        Type Detail: None
        Speed: 1066 MHz
        Manufacturer: None
        Serial Number: None
        Asset Tag: None
        Part Number: None

Handle 0x0022, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0020
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: No Module Installed
        Form Factor: DIMM
        Set: None
        Locator: A1
        Bank Locator: Bank2/3
        Type: Unknown
        Type Detail: None
        Speed: 400 MHz
        Manufacturer: None
        Serial Number: None
        Asset Tag: None
        Part Number: None

spoensche · 5 Okt. 2013

Sehr seltsam. Auf der Webseite von Gigabyte (Hersteller deines Boards) steht in den technischen Daten, dass auf dem Board (rev 3.1) ein Realtek 8111E Ethernet Chip verbaut ist und kein 3Com. Die rev 4.x und 5.x haben einen Atheros LAN Chip.

Jetzt mal Butter bei die Fische und poste mal die vollständige Ausgabe von

Code:

lspci -vk

mafg · 5 Okt. 2013

spoensche schrieb:
Sehr seltsam. Auf der Webseite von Gigabyte (Hersteller deines Boards) steht in den technischen Daten, dass auf dem Board (rev 3.1) ein Realtek 8111E Ethernet Chip verbaut ist und kein 3Com. Die rev 4.x und 5.x haben einen Atheros LAN Chip.

Der Onboard Chip ist deaktiviert, weil ich ihn unter Linux nicht zum Laufen bekommen habe. Darum steckt eine 3Com Netzwerkkarte in dem Rechner, die ich sowieso noch herumliegen hatte.

Code:
Jetzt mal Butter bei die Fische und poste mal die vollständige Ausgabe von

Code:

lspci -vk

Code:

linux-sauc:~ # lspci -vk
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
        Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge
        Flags: bus master, 66MHz, medium devsel, latency 32
        Memory at <ignored> (64-bit, non-prefetchable)
        Capabilities: [c4] HyperTransport: Slave or Primary Interface
        Capabilities: [54] HyperTransport: UnitID Clumping
        Capabilities: [40] HyperTransport: Retry Mode
        Capabilities: [9c] HyperTransport: #1a
        Capabilities: [f8] HyperTransport: #1c

00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fdc00000-fddfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)

00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
        I/O ports at ff00 [size=8]
        I/O ports at fe00 [size=4]
        I/O ports at fd00 [size=8]
        I/O ports at fc00 [size=4]
        I/O ports at fb00 [size=16]
        Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [60] Power Management version 2
        Capabilities: [70] SATA HBA v1.0
        Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
        Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
        Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
        Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd

00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
        Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
        Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
        Memory at fe029000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd

00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
        Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard
        Flags: 66MHz, medium devsel
        Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+

00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
        Subsystem: Giga-byte Technology Device 5002
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at fa00 [size=16]
        Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
        Kernel driver in use: pata_atiixp

00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
        Subsystem: Giga-byte Technology Device a002
        Flags: bus master, slow devsel, latency 32, IRQ 16
        Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
        Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
        Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
        Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fdf00000-fdffffff
        Prefetchable memory behind bridge: fde00000-fdefffff

00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Device 5004
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
        Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
        Flags: fast devsel

01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780L [Radeon HD 3000] (prog-if 00 [VGA controller])
        Subsystem: Giga-byte Technology Device d000
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at d0000000 (32-bit, prefetchable) [size=256M]
        I/O ports at ee00 [size=256]
        Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
        Memory at fdc00000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [50] Power Management version 3
        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Kernel driver in use: radeon

02:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
        Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
        Flags: bus master, medium devsel, latency 64, IRQ 20
        I/O ports at df00 [size=128]
        Memory at fdfff000 (32-bit, non-prefetchable) [size=128]
        [virtual] Expansion ROM at fde00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: 3c59x

Download Problem [gelöst]

Member

Moderator

Member

Moderator

Member

Ultimate Guru

Moderator

Member

Guru

Member

Moderator

Member

Moderator

Member

Ultimate Guru

Member

Ultimate Guru

Member

Moderator

Member