nach jedem neustart, online erst nach konfiguration mit yast

Hi.

Mein problem liegt darin das ich nach jedem neustart, ich immer erst das dsl konfigurieren muss um online zu kommen. dann funzt alles bis zum nächsten neustart. Ist das normal?

Grüße

Crazy Chao

nö

schau mal in die /var/log/messages da steht warum deine einwahl, Konfiguration nicht gelungen ist

Als Newbie kann ich leider nur sagen: ja da steht was, und sogar sehr viel...
Nach was muß ich suchen?

poste mal /var/log/boot.msg damit fangen wir mal an

Ok:

Inspecting /boot/System.map-2.6.5-7.95-default
Loaded 23735 symbols from /boot/System.map-2.6.5-7.95-default.
Symbols match kernel version 2.6.5.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.5-7.95-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Thu Jul 1 15:23:45 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
<4> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>757MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<4>On node 0 totalpages: 65520
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 61424 pages, LIFO batch:14
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 AMI ) @ 0x000fa2c0
<6>ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x0fff0000
<6>ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x0fff0030
<6>ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hdb9 vga=0x317 desktop resume=/dev/hdb8 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 1024 (order 10: 8192 bytes)
<4>CKRM Initialization
<4>...... Initializing ClassType<taskclass> ........
<4>...... Initializing ClassType<socket_class> ........
<4>CKRM Initialization done
<4>Detected 1344.384 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 254972k/262080k available (1963k kernel code, 6368k reserved, 688k data, 216k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 2662.40 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
<7>CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Athlon(tm) XP 1500+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1115k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Uncovering SIS18 that hid as a SIS503 (compatible=1)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>vesafb: framebuffer at 0xc0000000, mapped to 0xd0807000, size 32768k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
<6>vesafb: protected mode interface info at c000:bdb0
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<4>Initial HugeTLB pages allocated: 0
<5>VFS: Disk quotas dquot_6.5.1
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6> silentjpeg size 37245 bytes,<6>...found (1024x768, 17142 bytes, v3).
<4>Console: switching to colour frame buffer device 118x41
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 208
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS735 ATA 100 (2nd gen) controller
<6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hdaMA, hdbMA
<6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdcMA, hddMA
<4>hda: WDC WD300BB-32CCB0, ATA DISK drive
<4>hdb: IBM-DTLA-305030, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: SAMSUNG SV0644A, ATA DISK drive
<4>hdd: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100)
<4>hda: cache flushes not supported
<6> hda: hda1 hda2 < hda5 hda6 hda7 >
<4>hdb: max request size: 128KiB
<6>hdb: 60036480 sectors (30738 MB) w/380KiB Cache, CHS=59560/16/63, UDMA(100)
<4>hdb: cache flushes not supported
<6> hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 >
<4>hdc: max request size: 128KiB
<6>hdc: 12504240 sectors (6402 MB) w/478KiB Cache, CHS=13232/15/63, UDMA(33)
<4>hdc: cache flushes not supported
<6> hdc: hdc1 < hdc5 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 32768)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/hdb8
<4>Resuming from device hdb8
<3>Resume Machine: This is normal swap space
<6>ACPI: (supports S0 S1 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>ReiserFS: hdb9: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb9: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb9: journal params: device hdb9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb9: checking transaction log (hdb9)
<4>reiserfs: disabling flush barriers on hdb9
<5>ReiserFS: hdb9: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 216k freed
<6>Adding 511520k swap on /dev/hdb8. Priority:42 extents:1
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<6>NTFS driver 2.1.6 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Thu Jul 15 12:55:00 2004

<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.shm boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm boot.ipconfig) is (0 0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneroot file system (/) is NOT being checked.
<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.localfs boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.34 (25-Jul-2003)
fsck: cannot check /dev/hdb9: fsck.reiserfs not found
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hda6 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hda7 on /windows/F type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdb5 on /windows/G type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdb6 on /windows/H type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdb7 on /windows/I type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdc5 on /windows/J type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/hdd on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid)
done<notice>exit status of (boot.localfs boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules boot.klog)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneCreating /var/log/boot.msg
done<notice>killproc: kill(268,29)
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules boot.klog) is (0 0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>exit status of (boot.sched boot.localnet) is (6 0)
System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(268,3)


Boot logging started on /dev/tty1(/dev/console) at Thu Jul 15 13:24:29 2004

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (hwscan coldplug)
Starting hardware scan on bootcoldplug scanning input: ***done
scanning pci: .***...W....Wdone
scanning usb: .*.*.....done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (hwscan coldplug) is (0 0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
eth0 configuration: eth-id-00:0a:e6:70:38:7a
DHCP client dhcpcd is not available
please install package 'dhcpcd' or 'dhcp-client'
failedWaiting for mandatory devices: eth-id-00:0a:e6:70:38:7a
19 17 15 14 13 12 11 9 8 7 6 5 3 2 1 0
eth0 interface could not be set up
failed dsl0
dsl0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)
<notice>start services (syslog)
<notice>killproc: kill(884,15)
<notice>killproc: kill(881,15)
Re-Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (smbfs)
Mount SMB/ CIFS File Systems unused
<notice>exit status of (smbfs) is (6)
<notice>start services (splash_early resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd smpppd powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting sound driver: already runningdone
Starting SMPPPDdone
Starting SSH daemondone
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
<notice>exit status of (sshd smpppd powersaved fbset alsasound) is (0 0 0 0 0)
<notice>start services (xdm splash cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=37 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=41 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=silent sscripts=41 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting cupsddone
Starting service kdmdone
<notice>exit status of (xdm splash cups) is (0 0 0)
<notice>start services (nscd)
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=40 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>exit status of (nscd) is (0)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(4487,3)

Crazy Chao

DHCP client dhcpcd is not available
please install package 'dhcpcd' or 'dhcp-client'
failedWaiting for mandatory devices: eth-id-00:0a:e6:70:38:7a
19 17 15 14 13 12 11 9 8 7 6 5 3 2 1 0
eth0 interface could not be set up
failed dsl0
dsl0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)

Zum Vergrößern anklicken....

deine eth0 netzwerkkarte ist nicht (richtig) konfiguriert. Ich tippe mal, das ist die die zum dsl Modem geht. Die musst du einrichten. Sie kann irgendeine IP-Adresse haben (192.168.0.99)

Zweites Problem:
das System sucht einen dhcpd Server, soll es den geben? wenn nicht wird sich das durch die Einrichtung der Netzwerkkarte mit fester ip erledigen.

Die Netzwerkkarte wird in yast eingerichtet.

Ich versuch es mal gleich mit der IP,
Braucht man denn diesen dhcpd Server fuer irgendwas?

Crazy Chao

DHCPD liefert anfragenden Clients eine eindeutige IP zurück. Lass es erst mal weg

Immer einen Schritt vnach dem anderen, OK?

Ja, super, jetzt gehts.

Vielen Dank!

Crazy Chao