• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Host auflösen- kvpnc / kein Netz

garm

Newbie
Hallo,
nachdem ich mit kVpnc gestern im Netz war, geht heut nichts mehr. :???:
Das Programm meldet ... konnte Host nicht auflösen. Komme nur noch bis zur Fritzbox aber nicht mehr ins Netz.(mit Win7 funzt aber alles)


Code:
--- NWEliza is analyzing the system for common network configuration errors ...

!!! CND0250E: The system can't lookup external DNS name www.suse.de
!!! CND0410E: Configured nameserver with IP 83.149.80.123 is no nameserver
!!! CND0310W: Classic network configuration with ifup was detected. Configuration with knetworkmanager is much easier

--- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions 
--- about the error/warning messages and how to fix the problems on your own.

--- If you are unsuccessful then place the contents of file collectNWData.txt in the net
--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links) 
--- and then paste the nopaste link on your favorite Linux forum.

==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/lsb-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
openSUSE 11.2 (x86_64)
VERSION = 11.2
===== uname -a ===================================================================================================
Linux linux-lj6o 2.6.31.14-0.8-desktop #1 SMP PREEMPT 2011-04-06 18:09:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
===== lspci ======================================================================================================
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:369c]
	Kernel driver in use: r8169
===== find /lib/modules/`uname -r` -name "*.ko" ==================================================================
Available kernelmodules for VendorId:DeviceId - 10ec:8168
Module: r8169
===== lsusb | grep -v "root hub" =================================================================================
Bus 001 Device 004: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 002 Device 002: ID 04f9:01cf Brother Industries, Ltd DCP-150C
Bus 002 Device 003: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
===== hwinfo (filtered) ==========================================================================================
32: PCI 300.0: 0200 Ethernet controller
  Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
  SubDevice: pci 0x369c 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: yes
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
===== lsmod (filtered) ===========================================================================================
| af_packet       | amd64_edac_mod  | amd74xx         | btcx_risc       | cx24123          |
| cx8800          | cx8802          | cx88_alsa       | cx88_vp3054_i2c | cx88xx           |
| edac_core       | i2c_algo_bit    | i2c_nforce2     | ieee1394        | ip_tables        |
| isl6421         | k8temp          | ohci1394        | ppdev           | r8169            |
| sg              | sr_mod          | tveeprom        | usblp           | v4l1_compat      |
| v4l2_common     | v4l2_compat_ioctl32| vmblock         | vmmemctl        | vmsync           |
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          inet Adresse:192.168.178.20  Bcast:192.168.178.255  Maske:255.255.255.0
          inet6 Adresse: fe80::221:85ff:fe32:3eef/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:289 errors:0 dropped:0 overruns:0 frame:0
          TX packets:288 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:27757 (27.1 Kb)  TX bytes:25298 (24.7 Kb)
          Interrupt:29 Basisadresse:0x4000 
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller'
STARTMODE='auto'
USERCONTROL='no'
===== dhcpcd-test ================================================================================================
eth0: DHCP server available
===== ping tests =================================================================================================
Ping of 195.135.220.3 OK
ping: unknown host www.suse.de
Ping of www.suse.de failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 83.149.80.123
nameserver 85.17.150.123
nameserver 83.149.80.123
nameserver 85.17.150.123
nameserver 83.149.80.123
nameserver 85.17.150.123
nameserver 87.118.120.128
nameserver 193.22.254.22
nameserver 87.118.120.128
nameserver 193.22.254.22
nameserver 4.2.2.4
nameserver 95.143.207.201
nameserver 4.2.2.4
nameserver 95.143.207.201
nameserver 4.2.2.4
nameserver 95.143.207.201
nameserver 82.195.224.21
nameserver 82.195.224.20
nameserver 192.168.178.1
===== cat /etc/hosts =============================================================================================
127.0.0.1       localhost
127.0.0.2       linux-lj6o.site linux-lj6o
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
192.168.178.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
0.0.0.0         192.168.178.1   0.0.0.0         UG    0      0        0 eth0
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** NWElizaStates V0.6.5.4.3_i
IF:eth0 IM:1 DI:1 FALON:1 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:0 DNS:2 MTU:1 NISS:0 IP6:0 KM:0 WLW:0 RTDT:SuSE


könnt Ihr mir da bitte weiterhelfen.

mfg
 
OP
G

garm

Newbie
So,bin wieder mit dem Hauptrechner im Netz ! :roll:

1. mit yast Netzwerkkarte gelöscht
2. in etc resolv.config gelöscht
3. mit yast Karte wieder installiert ( resolv.config wird neu geschrieben )

i like Rambo-Linux ! ;)

mfg
garm
 
Oben