Hallo alle,
nun bastele ich schon 3 Tage und komme nicht weiter.
Also ich habe einen WLAN-USB-Stick TP-Link (TL-WN821N) über den ich in mein Heimnetzwerk (vodafone easybox 803) kommen will.
Über YAST habe ich den Netzwerkeinstellungen eine neue "Drahtlose Netzwerkkarte" eingerichtet. Weitere Einstellungen in YAST:
Das Gerät wird bei Systemstart aktiviert, ich habe es der Externen Zone zugewiesen.
Betriebsmodus ist "Verwaltet" und wenn ich das Netzwerk nach ESSID's durchsuche, wird mein Netzwerk gefunden (und andere), soweit so gut. Auhentifizierungsmodus ist WPA-PSK mit dem richtigen Schlüssel.
Mit ifconfig wird mir "wlan0" nur angezeigt, wenn ich auch das Netzwerkkabel stecken habe und nur dann habe ich dafür auch eine IP-Adresse bekommen.
Ein Zugriff auf mein Netzwerk oder Internet ist nicht möglich.
Hier nun noch ein paar Ausgaben des Skripts collectNWData.sh, das Netzwerkkabel ist bei Ausführung des Codes nicht gesteckt gewesen:
Vielen Dank für alle Tips!
nun bastele ich schon 3 Tage und komme nicht weiter.
Also ich habe einen WLAN-USB-Stick TP-Link (TL-WN821N) über den ich in mein Heimnetzwerk (vodafone easybox 803) kommen will.
Über YAST habe ich den Netzwerkeinstellungen eine neue "Drahtlose Netzwerkkarte" eingerichtet. Weitere Einstellungen in YAST:
Das Gerät wird bei Systemstart aktiviert, ich habe es der Externen Zone zugewiesen.
Betriebsmodus ist "Verwaltet" und wenn ich das Netzwerk nach ESSID's durchsuche, wird mein Netzwerk gefunden (und andere), soweit so gut. Auhentifizierungsmodus ist WPA-PSK mit dem richtigen Schlüssel.
Mit ifconfig wird mir "wlan0" nur angezeigt, wenn ich auch das Netzwerkkabel stecken habe und nur dann habe ich dafür auch eine IP-Adresse bekommen.
Ein Zugriff auf mein Netzwerk oder Internet ist nicht möglich.
Hier nun noch ein paar Ausgaben des Skripts collectNWData.sh, das Netzwerkkabel ist bei Ausführung des Codes nicht gesteckt gewesen:
Code:
collectNWData.sh V0.6.5.4.2_i1 (Rev: 1.283, Build: 2011/03/03 21:14:38 UTC)
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (1) WLAN access point <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1
--- NWEliza untersucht das System nach häufigen Netzwerkkonfigurationsfehlern ...
!!! CND0100E: Keine Netzwerkkarte für den gewählten Verbindungstyp kann auf dem System gefunden werden
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden können.
--- Wenn eigene Lösungsversuche erfolglos waren dann den Inhalt der Datei collectNWData.txt im Netz ablegen
--- (Links siehe http://www.linux-tips-and-tricks.de/CND_UPL)
--- und dann der nopaste Link im bevorzugten Linux Forum posten.
==================================================================================================================
===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
/etc/SuSE-release
openSUSE 11.4 (x86_64)
VERSION = 11.4
CODENAME = Celadon
===== uname -a ===================================================================================================
Linux rechsmall 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
===== lspci ======================================================================================================
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP79 Ethernet [10de:0ab0] (rev b1)
Subsystem: ASRock Incorporation Device [1849:0ab0]
Kernel driver in use: forcedeth
===== find /lib/modules/`uname -r` -name "*.ko" ==================================================================
===== lsusb | grep -v "root hub" =================================================================================
Bus 002 Device 002: ID 046d:c52e Logitech, Inc.
Bus 001 Device 002: ID 0cf3:7015 Atheros Communications, Inc.
===== hwinfo (filtered) ==========================================================================================
19: PCI 0a.0: 0200 Ethernet controller
Model: "nVidia MCP79 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0ab0 "MCP79 Ethernet"
SubVendor: pci 0x1849 "ASRock Incorporation"
SubDevice: pci 0x0ab0
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Link detected: no
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
===== lsmod (filtered) ===========================================================================================
| af_packet | arc4 | ath | ath9k_common | ath9k_htc |
| ath9k_hw | cfg80211 | compat | drm | drm_kms_helper |
| ecb | forcedeth | fscache | i2c_algo_bit | i2c_nforce2 |
| ip_tables | jbd2 | mac80211 | microcode | mperf |
| nouveau | pci_hotplug | rfkill | serio_raw | sg |
| shpchp | sr_mod | ttm | wmi |
===== ls /lib/firmware/* =========================================================================================
| 2.6.37.1-1.2-desktop | 3com | acenic | adaptec |
| advansys | agere_ap_fw.bin | agere_sta_fw.bin | amd-ucode |
| ar7010_1_1.fw | ar7010.fw | ar9170-1.fw | ar9170-2.fw |
| ar9271.fw | ath3k-1.fw | ath3k-2.fw | av7110 |
| bnx2 | bnx2x-e1-4.8.53.0.fw | bnx2x-e1-5.2.13.0.fw | bnx2x-e1-5.2.7.0.fw |
| bnx2x-e1h-4.8.53.0.fw | bnx2x-e1h-5.2.13.0.fw | bnx2x-e1h-5.2.7.0.fw | brcm |
| cis | cpia2 | cxgb3 | dabusb |
| dsp56k | dvb-fe-xc5000-1.6.114.fw| dvb-usb-dib0700-1.20.fw | e100 |
| edgeport | emi26 | emi62 | ess |
| f2255usb.bin | GPL-3 | i2400m-fw-usb-1.4.sbcf | i2400m-fw-usb-1.5.sbcf |
| i6050-fw-usb-1.5.sbcf | isdn | iwlwifi-1000-3.ucode | iwlwifi-100-5.ucode |
| iwlwifi-3945-2.ucode | iwlwifi-4965-2.ucode | iwlwifi-5000-1.ucode | iwlwifi-5000-2.ucode |
| iwlwifi-5150-2.ucode | iwlwifi-6000-4.ucode | iwlwifi-6000g2a-5.ucode | iwlwifi-6000g2b-5.ucode |
| iwlwifi-6050-4.ucode | iwlwifi-6050-5.ucode | kaweth | keyspan |
| keyspan_pda | korg | lgs8g75.fw | libertas |
| LICENCE.agere | LICENCE.atheros_firmware| LICENCE.broadcom_bcm43xx| LICENCE.i2400m |
| LICENCE.iwlwifi_firmware| LICENCE.Marvell | LICENCE.mwl8335 | LICENCE.phanfw |
| LICENCE.qla2xxx | LICENCE.ralink-firmware.txt| LICENCE.rtlwifi_firmware.txt| LICENCE.ti-connectivity |
| LICENCE.ueagle-atm4-firmware| LICENCE.via_vt6656 | LICENCE.xc5000 | LICENSE.dib0700 |
| LICENSE.radeon_rlc | matrox | microcode.dat | mrvl |
| mts_mt9234mu.fw | mts_mt9234zba.fw | mwl8335_duplex.fw | mwl8k |
| myricom | ositech | phanfw.bin | ql2100_fw.bin |
| ql2200_fw.bin | ql2300_fw.bin | ql2322_fw.bin | ql2400_fw.bin |
| ql2500_fw.bin | qlogic | r128 | radeon |
| rt2561.bin | rt2561s.bin | rt2661.bin | rt2860.bin |
| rt2870.bin | rt3070.bin | rt3071.bin | rt3090.bin |
| rt73.bin | RTL8192E | rtl_nic | rtlwifi |
| s2250.fw | s2250_loader.fw | sb16 | slicoss |
| sun | sxg | tehuti | ti-connectivity |
| tigon | tlg2300_firmware.bin | tr_smctr.bin | ttusb-budget |
| ueagle-atm | usbdux | usbduxfast_firmware.bin | usbdux_firmware.bin |
| v4l-cx231xx-avcore-01.fw| v4l-cx23418-apu.fw | v4l-cx23418-cpu.fw | v4l-cx23418-dig.fw |
| v4l-cx23885-avcore-01.fw| v4l-cx23885-enc.fw | v4l-cx25840.fw | vicam |
| vntwusb.fw | vxge | yam | yamaha |
===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
inet Adresse:192.168.2.103 Bcast:192.168.2.255 Maske:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:4718 errors:0 dropped:0 overruns:0 frame:0
TX packets:4416 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:4605222 (4.3 Mb) TX bytes:662643 (647.1 Kb)
Interrupt:20 Basisadresse:0xe000
wlan0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#2
inet Adresse:192.168.2.34 Bcast:192.168.2.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:398 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:73988 (72.2 Kb) TX bytes:6950 (6.7 Kb)
===== iwconfig ===================================================================================================
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"§§§§§§§§1"
Mode:Managed Frequency:2.412 GHz Access Point: ##:##:##:##:##:#3
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=42/70 Signal level=-68 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:7 Missed beacon:0
===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp4'
STARTMODE='nfsroot'
NAME='MCP79 Ethernet'
USERCONTROL='no'
--- /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='dhcp4'
STARTMODE='auto'
USERCONTROL='yes'
WIRELESS_AP_SCANMODE='1'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='§§§§§§§§1'
WIRELESS_KEY_LENGTH='@@@@@@'
WIRELESS_MODE='Managed'
WIRELESS_POWER='yes'
WIRELESS_WPA_PSK='@@@@@@'
===== iwlist scanning ============================================================================================
Channel:1
Quality=40/70 Signal level=-70 dBm
Encryption key:on
ESSID:"§§§§§§§§1"
IE: WPA Version 1
IE: IEEE 802.11i/WPA2 Version 1
===== ndiswrapper -l =============================================================================================
No ndiswrapper module loaded
===== Active processes ===========================================================================================
wpa_supplicant:YES knetworkmanager:NO nm-applet:YES
===== Active WPA processes =======================================================================================
wpa_supplicant -iwlan0 -c/var/run/wpa_supplicant-wlan0.conf -Dnl80211,wext -P/var/run/wpa_supplicant/wlan0.pid -B
===== ===== egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$" =================
NETWORKMANAGER="no"
===== dhcpcd-test ================================================================================================
wlan0: DHCP server available
===== ping tests =================================================================================================
Ping of 195.135.220.3 failed
Ping of www.suse.de failed
===== cat /etc/resolv | grep -i "nameserver" =====================================================================
nameserver 192.168.2.1
nameserver 195.50.140.246
nameserver 195.50.140.252
===== cat /etc/hosts =============================================================================================
127.0.0.1 localhost
127.0.0.2 rechsmall.t-knack.local rechsmall
192.168.2.2 rechfix rechfix.t-knack.local
===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth0
===== Actual date for bias of following greps ====================================================================
07:58:12 2011-03-30
===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
===== dmesg | grep -i radio | tail -n 5 ==========================================================================
[ 5.693729] Registered led device: ath9k-phy0::radio
===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|backlist' ================
==================================================================================================================
*** NWElizaStates V0.6.5.4.2_i1
IF:eth0 IM:1 IF:wlan0 IM:2 DI:2 AP:1 FALON:0
Vielen Dank für alle Tips!