bob:~ # /etc/init.d/ntp ntptimeset
. . . . . . . . . . no server reached
cat /etc/ntp.conf
################################################################################
## /etc/ntp.conf
##
## Sample NTP configuration file.
## See package 'ntp-doc' for documentation, Mini-HOWTO and FAQ.
## Copyright (c) 1998 S.u.S.E. GmbH Fuerth, Germany.
##
## Author: Michael Andres, <ma@suse.de>
## Michael Skibbe, <mskibbe@suse.de>
##
################################################################################
##
## Radio and modem clocks by convention have addresses in the
## form 127.127.t.u, where t is the clock type and u is a unit
## number in the range 0-3.
##
## Most of these clocks require support in the form of a
## serial port or special bus peripheral. The particular
## device is normally specified by adding a soft link
## /dev/device-u to the particular hardware device involved,
## where u correspond to the unit number above.
##
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address: 127.127.8.u
## Serial Port: /dev/refclock-u
##
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer
##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
server 127.127.1.0
# local clock (LCL)
fudge 127.127.1.0 stratum 10
# LCL is unsynchronized
##
## Add external Servers using
## # rcntp addserver <yourserver>
##
##
## Miscellaneous stuff
##
driftfile /var/lib/ntp/drift/ntp.drift
# path for drift file
logfile /var/log/ntp
# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all
# statsdir /tmp/ # directory for statistics files
# filegen peerstats file peerstats type day enable
# filegen loopstats file loopstats type day enable
# filegen clockstats file clockstats type day enable
#
# Authentication stuff
#
keys /etc/ntp.keys
# path for keys file
trustedkey 1
# define trusted keys
requestkey 1
server de.pool.ntp.org iburst
restrict
restrict de.pool.ntp.org
# key (7) for accessing server variables
# controlkey 15 # key (6) for accessing server variables