• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[Gelöst] Kein Netzwerk mehr nach KDE Update

fab.i.an

Member
Hallo

nach einen update von KDE 4.3.5 zu 4.4.5 (siehe http://www.linux-club.de/viewtopic.php?f=24&t=110089) kriege ich keine Internet verbindung mehr. Es wurde ein neuer Knetwork Manager installiert...aber wenn Ich dort auf mein WLAN klicke passiert garnichts. Genauso kriege ich auch keine Verbindung mit einem Ethernetkabel.

Hier die Daten vom CollectNWData Script:

Code:
collectNWData.sh V0.6.3.8-4 (Rev: 1.235, Build: 2010/07/11 17:49:05 UTC)
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgefuehrt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1

--- NWEliza untersucht das System nach haeufigen Netzwerkkonfigurationsfehlern untersucht ...


!!! CND0330E: Es existierern Schluesselprobleme am Interface wlan0
!!! CND0510W: Der Kanal 2, der vom eigenen Accesspoint benutzt wird, wird von 1 benachbarten Access Points ueberlagert
!!! CND0230W: IPV6 ist eingeschaltet
!!! CND0240E: Knetworkmanager wird fuer die Netzwerkkonfiguration benutzt aber eine YAST Netzwerkkartenkonfiguration fuer eth0 existiert

--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise 
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden koennen.



==================================================================================================================
==================================================================================================================
*** uname -a
Linux home 2.6.27.45-0.1-pae #1 SMP 2010-02-22 16:49:47 +0100 i686 i686 i386 GNU/Linux
==================================================================================================================
*** cat /etc/*[-_]release || cat /etc/*[-_]version
/etc/lsb-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-ia32:core-3.2-ia32"
openSUSE 11.1 (i586)
VERSION = 11.1
==================================================================================================================
*** cat /etc/resolv | grep -i "nameserver"
==================================================================================================================
*** cat /etc/hosts
127.0.0.1       localhost
127.0.0.2	home
==================================================================================================================
*** route -n
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
==================================================================================================================
*** ifconfig
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          inet6 Adresse: fe80::221:85ff:fe61:2336/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:2520 (2.4 Kb)
          Interrupt:219 Basisadresse:0x6000 
lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1345 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1345 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:240157 (234.5 Kb)  TX bytes:240157 (234.5 Kb)
wlan0     Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#2  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
wmaster0  Link encap:UNSPEC  Hardware Adresse 00-22-B0-ED-34-86-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
==================================================================================================================
*** ping tests
connect: Network is unreachable
Ping of 195.135.220.3 failed
ping: unknown host www.suse.de
Ping of www.suse.de failed
==================================================================================================================
*** dhcpcd-test
wlan0: No DHCP server detected info, wlan0: hardware address = ##:##:##:##:##:#2
info, wlan0: broadcasting for a lease
debug, wlan0: sending DHCP_DISCOVER with xid 0x13c7c163
debug, wlan0: waiting for 3 seconds
info, wlan0: exiting
==================================================================================================================
*** lspci
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
05:05.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
==================================================================================================================
*** lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52b Logitech, Inc. 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0745 Microsoft Corp. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 1307:0165 Transcend Information, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==================================================================================================================
*** hwinfo (filtered)
29: PCI 400.0: 0200 Ethernet controller
  Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
  SubDevice: pci 0x519c 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: yes
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
30: PCI 505.0: 0282 WLAN controller
  Model: "D-Link DWL-G510 Rev C"
  Vendor: pci 0x1814 "RaLink"
  Device: pci 0x0302 "RT2561/RT61 rev B 802.11g"
  SubVendor: pci 0x1186 "D-Link System Inc"
  SubDevice: pci 0x3c09 "DWL-G510 Rev C"
  Driver: "rt61pci"
  Driver Modules: "rt61pci"
  Device File: wlan0
  Link detected: yes
    Driver Status: rt61pci is active
    Driver Activation Cmd: "modprobe rt61pci"
==================================================================================================================
*** lsmod # (filtered)
| af_packet       | arc4            | ata_piix        | binfmt_misc     | cfg80211         |
| dock            | ecb             | eeprom_93cx6    | ehci_hcd        | ff_memless       |
| hid             | hwmon           | i2c_core        | i2c_i801        | ip6table_filter  |
| ip6table_mangle | ip6table_raw    | ip6_tables      | ip6t_LOG        | ip6t_REJECT      |
| ip_tables       | jbd             | led_class       | libata          | mac80211         |
| mbcache         | mii             | r8169           | rfkill          | rt2x00lib        |
| rt2x00pci       | rt61pci         | scsi_mod        | sd_mod          | serio_raw        |
| sg              | sr_mod          | uhci_hcd        | usb_storage     | xt_limit         |
| xt_NOTRACK      | xt_pkttype      | xt_state        |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]*
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
==================================================================================================================
*** iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
wmaster0  no wireless extensions.
vboxnet0  no wireless extensions.
wlan0     IEEE 802.11bg  ESSID:""  
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Tx-Power=15 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
==================================================================================================================
*** Actual date for bias of following greps
18:41:21 2010-07-12
==================================================================================================================
*** grep -i radio /var/log/messages* | tail -n 5
==================================================================================================================
*** dmesg | grep -i radio | tail -n 5
Registered led device: rt61pci-phy0::radio
==================================================================================================================
*** tail -n 300 /var/log/messages* | /bin/grep -i firmware | tail -n 5
==================================================================================================================
*** ls /lib/firmware/*
| 2.6.27.45-0.1-pae       | LICENSE.ralink-firmware.txt| rt2561.bin              | rt2561s.bin              |
| rt2661.bin              | rt2860.bin              | rt2870.bin              | rt73.bin                 |
==================================================================================================================
*** ndiswrapper -l
No ndiswrapper module loaded
==================================================================================================================
*** Active processes
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
==================================================================================================================
*** egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$"
NETWORKMANAGER="yes"
==================================================================================================================
*** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net*
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
==================================================================================================================
*** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
/etc/modprobe.conf:install eth0             /bin/true
/etc/modprobe.conf:install eth1             /bin/true
==================================================================================================================
*** iwlist scanning
                    ESSID:"§§§§§§§§2"
                    Channel:2
                    Quality=50/100  Signal level:-60 dBm  
                    Encryption key:on
                    IE: WPA Version 1
                    ESSID:"§§§§§§§§1"
                    Channel:11
                    Quality=51/100  Signal level:-52 dBm  
                    Encryption key:on
                    IE: IEEE 802.11i/WPA2 Version 1
                    ESSID:"§§§§§§§§3"
                    Channel:1
                    Quality=49/100  Signal level:-66 dBm  
                    Encryption key:on
                    IE: IEEE 802.11i/WPA2 Version 1
==================================================================================================================
*** NWElizaStates V0.6.3.8-4
IF:eth0 IM:1 IF:wlan0 IM:2 DI:2 AP:1 FALON:1 NIC:1 cNiC:2:1 NI:2 cNI:2 NIW:wlan0-2 NIWLA:0 CM:0 IP6:1 KM:1 WLW:0 RTDT:SuSE

hier alle Netzwerk Pakete

Code:
fabian@home:~> rpm -qa | grep net
yast2-inetd-2.17.3-1.4
yast2-network-2.17.78.2-0.2.1
net-tools-1.60-725.5
telnet-1.2-134.28
libnetpbm10-10.26.44-98.17.1
plasmoid-networkmanagement-0.9.svn1128615-139.3
netcat-1.10-1005.9
netpbm-10.26.44-98.17.1
gnet-2.0.7-64.207
kdenetwork4-filesharing-4.4.5-152.2
libnet-1.1.2.1-140.27
netcfg-11.1-1.14

ich hoffe Ihr könnt mir weiterhelfen?! :)

Gruß Fabian
 

NaitsabeS

Newbie
Wie sieht es denn aus, wenn du es nicht über den KNetworkmanager laufen lässt. Also die Netzwerkeinstellungen über Yast laufen lässt (müsste dann über ifup sein). Geht es da auch nicht?

Verwendest du einen Router? Denn bei deiner route -n Ausgabe steht als Ziel 127.0.0.0.
Und bei der Ausgabe von /etc/sysconfig/network/ifcfg-eth0 ist auch kein Netzwerk angegeben.
 
OP
F

fab.i.an

Member
hab jetzt einfach mal den Haken in "Traditionelle Methode gemacht...funktioniert aber trotzdem nicht. Ich denke mal dasmandort noch ein paar Einstellungen machen muss...
 
OP
F

fab.i.an

Member
keiner ne Idee? Also Ich hab mir mal die Fehlercodes aus der CollectNWData durchgelesen und der einzigste wirkliche Fehler ist der:
CND0330E: Es existierern Schluesselprobleme am Interface wlan0

so und ein iwconfig zeigte keine eingetragene ESSID an....die habe ich dann nachgetragen.

Hier mal das aktualisierte Daten:

Code:
collectNWData.sh V0.6.3.8-4 (Rev: 1.235, Build: 2010/07/11 17:49:05 UTC)
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgefuehrt?
--- (1) LinuxClient
--- WLAN SSID zu der verbunden werden soll: §§§§§§§§1

--- NWEliza untersucht das System nach haeufigen Netzwerkkonfigurationsfehlern untersucht ...


!!! CND0300E: Keinen dhcp Server am Interface wlan0 gefunden
!!! CND0230W: IPV6 ist eingeschaltet
!!! CND0240E: Knetworkmanager wird fuer die Netzwerkkonfiguration benutzt aber eine YAST Netzwerkkartenkonfiguration fuer eth0 existiert

--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise 
--- zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler selbst beseitigt werden koennen.



==================================================================================================================
==================================================================================================================
*** uname -a
Linux home 2.6.27.45-0.1-pae #1 SMP 2010-02-22 16:49:47 +0100 i686 i686 i386 GNU/Linux
==================================================================================================================
*** cat /etc/*[-_]release || cat /etc/*[-_]version
/etc/lsb-release
/etc/SuSE-release
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-ia32:core-3.2-ia32"
openSUSE 11.1 (i586)
VERSION = 11.1
==================================================================================================================
*** cat /etc/resolv | grep -i "nameserver"
==================================================================================================================
*** cat /etc/hosts
127.0.0.1       localhost
127.0.0.2       home.site home
==================================================================================================================
*** route -n
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
==================================================================================================================
*** ifconfig
eth0      Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:219 Basisadresse:0x6000 
lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:466 errors:0 dropped:0 overruns:0 frame:0
          TX packets:466 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:181182 (176.9 Kb)  TX bytes:181182 (176.9 Kb)
wlan0     Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#2  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
wmaster0  Link encap:UNSPEC  Hardware Adresse 00-22-B0-ED-34-86-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
==================================================================================================================
*** ping tests
connect: Network is unreachable
Ping of 195.135.220.3 failed
ping: unknown host www.suse.de
Ping of www.suse.de failed
==================================================================================================================
*** dhcpcd-test
wlan0: No DHCP server detected info, wlan0: hardware address = ##:##:##:##:##:#2
info, wlan0: broadcasting for a lease
debug, wlan0: sending DHCP_DISCOVER with xid 0x28b22227
debug, wlan0: waiting for 3 seconds
info, wlan0: exiting
==================================================================================================================
*** lspci
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
05:05.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
==================================================================================================================
*** lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0745 Microsoft Corp. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52b Logitech, Inc. 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13fd:1840 Initio Corporation 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==================================================================================================================
*** hwinfo (filtered)
29: PCI 400.0: 0200 Ethernet controller
  Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
  SubDevice: pci 0x519c 
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  Link detected: no
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
30: PCI 505.0: 0282 WLAN controller
  Model: "D-Link DWL-G510 Rev C"
  Vendor: pci 0x1814 "RaLink"
  Device: pci 0x0302 "RT2561/RT61 rev B 802.11g"
  SubVendor: pci 0x1186 "D-Link System Inc"
  SubDevice: pci 0x3c09 "DWL-G510 Rev C"
  Driver: "rt61pci"
  Driver Modules: "rt61pci"
  Device File: wlan0
  Link detected: yes
    Driver Status: rt61pci is active
    Driver Activation Cmd: "modprobe rt61pci"
==================================================================================================================
*** lsmod # (filtered)
| af_packet       | arc4            | ata_piix        | binfmt_misc     | cfg80211         |
| dock            | ecb             | eeprom_93cx6    | ehci_hcd        | ff_memless       |
| hid             | hwmon           | i2c_core        | i2c_i801        | ip6table_filter  |
| ip6table_mangle | ip6table_raw    | ip6_tables      | ip6t_LOG        | ip6t_REJECT      |
| ip_tables       | jbd             | led_class       | libata          | mac80211         |
| mbcache         | mii             | r8169           | rfkill          | rt2x00lib        |
| rt2x00pci       | rt61pci         | scsi_mod        | sd_mod          | serio_raw        |
| sg              | sr_mod          | uhci_hcd        | usb_storage     | xt_limit         |
| xt_NOTRACK      | xt_pkttype      | xt_state        |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]*
--- /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
==================================================================================================================
*** iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
wmaster0  no wireless extensions.
vboxnet0  no wireless extensions.
wlan0     IEEE 802.11bg  ESSID:"§§§§§§§§1"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated   
          Tx-Power=15 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
==================================================================================================================
*** Actual date for bias of following greps
20:56:41 2010-07-12
==================================================================================================================
*** grep -i radio /var/log/messages* | tail -n 5
==================================================================================================================
*** dmesg | grep -i radio | tail -n 5
Registered led device: rt61pci-phy0::radio
==================================================================================================================
*** tail -n 300 /var/log/messages* | /bin/grep -i firmware | tail -n 5
Übereinstimmungen in Binärdatei (Standardeingabe).
==================================================================================================================
*** ls /lib/firmware/*
| 2.6.27.45-0.1-pae       | LICENSE.ralink-firmware.txt| rt2561.bin              | rt2561s.bin              |
| rt2661.bin              | rt2860.bin              | rt2870.bin              | rt73.bin                 |
==================================================================================================================
*** ndiswrapper -l
No ndiswrapper module loaded
==================================================================================================================
*** Active processes
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
==================================================================================================================
*** egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$"
NETWORKMANAGER="yes"
==================================================================================================================
*** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net*
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#2", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
/etc/modprobe.conf:install eth0             /bin/true
/etc/modprobe.conf:install eth1             /bin/true
==================================================================================================================
*** iwlist scanning
                    ESSID:"§§§§§§§§1"
                    Channel:11
                    Quality=51/100  Signal level:-52 dBm  
                    Encryption key:on
                    IE: IEEE 802.11i/WPA2 Version 1
                    ESSID:"§§§§§§§§2"
                    Channel:1
                    Quality=30/100  Signal level:-64 dBm  
                    Encryption key:on
                    IE: IEEE 802.11i/WPA2 Version 1
==================================================================================================================
*** NWElizaStates V0.6.3.8-4
IF:eth0 IM:1 IF:wlan0 IM:2 DI:2 AP:1 FALON:1 NIC:1 cNiC:2:1 NI:2 cNI:2 NIW:wlan0-0 DHCP:2 CM:0 IP6:1 KM:1 WLW:0 RTDT:SuSE
 

NaitsabeS

Newbie
*** route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo


Ist 127.0.0.0 die IP vom Router?
 

admine

Ultimate Guru
Dann muss der als Default-Gateway eingetragen werden!
Wie bekommst du deine IP?
Via DHCP? Wenn ja, dann scheint das auch nicht zu klappen!
 
OP
F

fab.i.an

Member
Also Ich habs nach viel Versuchen hin gekriegt. Ich hab in YAST auf "Traditionelle Methode gestellt und die Karte konfiguriert. Jetzt scheints erstmal zu funktionieren. Ich werd den Thread dann schließen.

Danke für die Hilfe
 
Oben