Hallo, ich bekomme die Module für meine Isdn-Karte nicht korrekt geladen. Unter Suse 9.0 ging es einfach nach der Konfiguration mit yast. Jetzt scheine ich ein Problem mit der io-Adresse zu haben. Kann mir jemand einen Tipp geben wie ich das Problem lösen kann? Habe ein paar log-Dateien zur Fehlersuche angehängt.
Danke, Jörg
linux:/home/Joerg # dmesg
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
(teles_cs: looks like the 97 model)
teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles IO driver Rev. 2.19.2.4
HiSax: Teles PCMCIA ports 2f0-350 already in use
teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
/var/log/messages
Jul 6 23:12:11 linux kernel: HiSax module removed
Jul 6 23:12:11 linux kernel: ISDN-subsystem unloaded
Jul 6 23:12:11 linux cardmgr[1967]: socket 0: TELES S0/PC ISDN
Jul 6 23:12:11 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jul 6 23:12:11 linux kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 6 23:12:11 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jul 6 23:12:11 linux kernel: HiSax: Version 3.5 (module)
Jul 6 23:12:11 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jul 6 23:12:11 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jul 6 23:12:11 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jul 6 23:12:11 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jul 6 23:12:11 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jul 6 23:12:11 linux cardmgr[1967]: get dev info on socket 0 failed: No such device
Jul 6 23:12:11 linux kernel: HiSax module removed
Jul 6 23:12:11 linux kernel: ISDN-subsystem unloaded
Jul 6 23:12:15 linux cardmgr[1967]: socket 0: TELES S0/PC ISDN
Jul 6 23:12:16 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jul 6 23:12:16 linux kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 6 23:12:16 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jul 6 23:12:16 linux kernel: HiSax: Version 3.5 (module)
Jul 6 23:12:16 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jul 6 23:12:16 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jul 6 23:12:16 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jul 6 23:12:16 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jul 6 23:12:16 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jul 6 23:12:16 linux kernel: (teles_cs: looks like the 97 model)
Jul 6 23:12:16 linux kernel: teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
Jul 6 23:12:16 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jul 6 23:12:16 linux kernel: HiSax: Teles IO driver Rev. 2.19.2.4
Jul 6 23:12:16 linux kernel: HiSax: Teles PCMCIA ports 2f0-350 already in use
Jul 6 23:12:16 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Jul 6 23:12:16 linux cardmgr[1967]: get dev info on socket 0 failed: No such device
/var/log/boot.msg
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Setting up ISDN card contr0 Teles PCMCIAskipped
Starting Firewall Initialization (phase 1 of 3) done
<notice>exit status of (random isdn hotplug SuSEfirewall2_init) is (0 5 0 0)
<notice>start services (coldplug)
coldplug scanning input: done
scanning pci: ******.WWW****done
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .d
one
<notice>exit status of (coldplug) is (0)
<notice>start services (pcmcia)
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ C
ONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2
.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/us
r/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscr
ipts=50 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
cardmgr[1967]: socket 0: TELES S0/PC ISDN
<notice>exit status of (pcmcia) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
cardmgr[1967]: get dev info on socket 0 failed: No such device
lo IP address: 127.0.0.1/8
Warning: interface eth0 is not (yet?) active.
Warning: No interface active (yet?)done eth0 device: 3Com Corporation 3
c905C-TX/TX-M [Tornado] (rev 78)
eth0 configuration: eth-id-00:06:5b:b9:a5:b2
eth0 IP address: 192.168.1.25/24
done ippp0
error in /usr/sbin/isdnctrl addif ippp0
failedSetting up service network . . . . . . . . . . . . . . . .
done
<notice>exit status of (network) is (0)
<notice>start services (syslog isdngw)
<notice>startproc: execve (/usr/sbin/isdngw) [ /usr/sbin/isdngw -d ], [ CONSOLE=
/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 RED
IRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin v
ga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=50
_=/sbin/startproc DAEMON=/usr/sbin/isdngw ]
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/lo
g ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sy
svinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/
sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=sil
ent sscripts=50 _=/sbin/startproc DAEMON=/sbin/syslogd ]
Starting service isdngw (H.323 - ISDN gateway)done
Starting syslog services<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c
1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSIO
N=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/
usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash
=silent sscripts=50 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog isdngw) is (0 0)
linux:/home/Joerg # isdnctrl dial
Can't open /dev/isdnctrl or /dev/isdn/isdnctrl: No such device
linux:/home/Joerg # ifconfig ippp0 up
ippp0: unbekannte Schnittstelle: Kein passendes Gerät gefunden
Danke, Jörg
linux:/home/Joerg # dmesg
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
(teles_cs: looks like the 97 model)
teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles IO driver Rev. 2.19.2.4
HiSax: Teles PCMCIA ports 2f0-350 already in use
teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
/var/log/messages
Jul 6 23:12:11 linux kernel: HiSax module removed
Jul 6 23:12:11 linux kernel: ISDN-subsystem unloaded
Jul 6 23:12:11 linux cardmgr[1967]: socket 0: TELES S0/PC ISDN
Jul 6 23:12:11 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jul 6 23:12:11 linux kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 6 23:12:11 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jul 6 23:12:11 linux kernel: HiSax: Version 3.5 (module)
Jul 6 23:12:11 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jul 6 23:12:11 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jul 6 23:12:11 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jul 6 23:12:11 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jul 6 23:12:11 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jul 6 23:12:11 linux cardmgr[1967]: get dev info on socket 0 failed: No such device
Jul 6 23:12:11 linux kernel: HiSax module removed
Jul 6 23:12:11 linux kernel: ISDN-subsystem unloaded
Jul 6 23:12:15 linux cardmgr[1967]: socket 0: TELES S0/PC ISDN
Jul 6 23:12:16 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jul 6 23:12:16 linux kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 6 23:12:16 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jul 6 23:12:16 linux kernel: HiSax: Version 3.5 (module)
Jul 6 23:12:16 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jul 6 23:12:16 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jul 6 23:12:16 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jul 6 23:12:16 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jul 6 23:12:16 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jul 6 23:12:16 linux kernel: (teles_cs: looks like the 97 model)
Jul 6 23:12:16 linux kernel: teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
Jul 6 23:12:16 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jul 6 23:12:16 linux kernel: HiSax: Teles IO driver Rev. 2.19.2.4
Jul 6 23:12:16 linux kernel: HiSax: Teles PCMCIA ports 2f0-350 already in use
Jul 6 23:12:16 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Jul 6 23:12:16 linux cardmgr[1967]: get dev info on socket 0 failed: No such device
/var/log/boot.msg
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Setting up ISDN card contr0 Teles PCMCIAskipped
Starting Firewall Initialization (phase 1 of 3) done
<notice>exit status of (random isdn hotplug SuSEfirewall2_init) is (0 5 0 0)
<notice>start services (coldplug)
coldplug scanning input: done
scanning pci: ******.WWW****done
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .d
one
<notice>exit status of (coldplug) is (0)
<notice>start services (pcmcia)
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ C
ONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2
.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/us
r/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscr
ipts=50 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
cardmgr[1967]: socket 0: TELES S0/PC ISDN
<notice>exit status of (pcmcia) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
cardmgr[1967]: get dev info on socket 0 failed: No such device
lo IP address: 127.0.0.1/8
Warning: interface eth0 is not (yet?) active.
Warning: No interface active (yet?)done eth0 device: 3Com Corporation 3
c905C-TX/TX-M [Tornado] (rev 78)
eth0 configuration: eth-id-00:06:5b:b9:a5:b2
eth0 IP address: 192.168.1.25/24
done ippp0
error in /usr/sbin/isdnctrl addif ippp0
failedSetting up service network . . . . . . . . . . . . . . . .
done
<notice>exit status of (network) is (0)
<notice>start services (syslog isdngw)
<notice>startproc: execve (/usr/sbin/isdngw) [ /usr/sbin/isdngw -d ], [ CONSOLE=
/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 RED
IRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin v
ga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=50
_=/sbin/startproc DAEMON=/usr/sbin/isdngw ]
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/lo
g ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sy
svinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/
sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=sil
ent sscripts=50 _=/sbin/startproc DAEMON=/sbin/syslogd ]
Starting service isdngw (H.323 - ISDN gateway)done
Starting syslog services<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c
1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSIO
N=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/
usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash
=silent sscripts=50 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog isdngw) is (0 0)
linux:/home/Joerg # isdnctrl dial
Can't open /dev/isdnctrl or /dev/isdn/isdnctrl: No such device
linux:/home/Joerg # ifconfig ippp0 up
ippp0: unbekannte Schnittstelle: Kein passendes Gerät gefunden