• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Samba (fstab) nach Neustart kein Auto mount, nur mount -a

B

BuBu2009

Newbie
Guten Tag,

auf meiner Fritzbox 7270 läuft ein Samba und diese möchte ich mit fstab mounten.

Code: 
//fritz.box/Stoof/ /media/samba cifs user,uid=1000,gid=1000 0 0

Der Samba läuft ohne Benutzername und PW, da dies auf der Fritz noch nicht möglich ist.
Mit dem Befehl mount -a mountet er auch die Freigabe, macht es aber beim Neustart nicht automatisch.

Wer hat die Lösung ?

Danke


mfg
 
A

admine

Ultimate Guru
Findest du dazu etwas im Boot-Log (/var/log/boot.msg) oder auch mit "dmesg" möglich.
Evt. noch greppen nach "fritz.box".
 
OP
B

BuBu2009

Newbie
Also ich finde in dem Log keinerlei Anhaltspunkte über mein Samba mount. Vielleicht wäre jemand so net und könnte einmal drüber fliegen.

Code: 
Inspecting /boot/System.map-2.6.27.21-0.1-pae
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.21-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-03-31 14:50:44 +0200
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000007f6a0000 (usable)
<6> BIOS-e820: 000000007f6a0000 - 000000007f6ae000 (ACPI data)
<6> BIOS-e820: 000000007f6ae000 - 000000007f6e0000 (ACPI NVS)
<6> BIOS-e820: 000000007f6e0000 - 000000007f700000 (reserved)
<6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<6>DMI 2.4 present.
<5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
<6>last_pfn = 0x7f6a0 max_arch_pfn = 0x1000000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 10000-18000
<6>NX (Execute Disable) protection: active
<6>RAMDISK: 37a76000 - 37fef0d9
<4>ACPI: RSDP 000FB7E0, 0024 (r2 ACPIAM)
<4>ACPI: XSDT 7F6A0100, 0054 (r1 A_M_I_ OEMXSDT   7000828 MSFT       97)
<4>ACPI: FACP 7F6A0290, 00F4 (r3 A_M_I_ OEMFACP   7000828 MSFT       97)
<4>ACPI: DSDT 7F6A05C0, 6FC6 (r1  A0844 A0844000        0 INTL 20051117)
<4>ACPI: FACS 7F6AE000, 0040
<4>ACPI: APIC 7F6A0390, 006C (r1 A_M_I_ OEMAPIC   7000828 MSFT       97)
<4>ACPI: MCFG 7F6A0400, 003C (r1 A_M_I_ OEMMCFG   7000828 MSFT       97)
<4>ACPI: OEMB 7F6AE040, 0080 (r1 A_M_I_ AMI_OEM   7000828 MSFT       97)
<4>ACPI: HPET 7F6A7590, 0038 (r1 A_M_I_ OEMHPET   7000828 MSFT       97)
<4>ACPI: GSCI 7F6AE0C0, 2024 (r1 A_M_I_ GMCHSCI   7000828 MSFT       97)
<7>ACPI: Local APIC address 0xfee00000
<7>NUMA - single node, flat memory mode
<6>Node: 0, start_pfn: 0, end_pfn: 7f6a0
<7>  Setting physnode_map array to node 0 for pfns:
<7>  0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 
<7>node 0 pfn: [0 - 7f6a0]
<7>Reserving 4608 pages of KVA for lmem_map of node 0 at 7e400
<7>remove_active_range (0, 517120, 521728)
<6>Reserving total of 1200 pages for numa KVA remap
<6>kva_start_pfn ~ 36800 max_low_pfn ~ 38000
<6>max_pfn = 7f6a0
<5>1142MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>max_low_pfn = 38000, highstart_pfn = 38000
<7>Low memory ends at vaddr f8000000
<7>node 0 will remap to vaddr f6800000 - f7a00000
<7>allocate_pgdat: node 0 NODE_DATA f6800000
<7>remap_numa_kva: node 0
<7>remap_numa_kva: f6800000 to pfn 0007e400
<7>remap_numa_kva: f6a00000 to pfn 0007e600
<7>remap_numa_kva: f6c00000 to pfn 0007e800
<7>remap_numa_kva: f6e00000 to pfn 0007ea00
<7>remap_numa_kva: f7000000 to pfn 0007ec00
<7>remap_numa_kva: f7200000 to pfn 0007ee00
<7>remap_numa_kva: f7400000 to pfn 0007f000
<7>remap_numa_kva: f7600000 to pfn 0007f200
<7>remap_numa_kva: f7800000 to pfn 0007f400
<7>High memory starts at vaddr f8000000
<6>  mapped low ram: 0 - 38000000
<6>  low ram: 00000000 - 38000000
<6>  bootmap 00014000 - 0001b000
<6>(11 early reservations) ==> bootmem [0000000000 - 0038000000]
<6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
<6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
<6>  #3 [0000100000 - 000065445c]    TEXT DATA BSS ==> [0000100000 - 000065445c]
<6>  #4 [0037a76000 - 0037fef0d9]          RAMDISK ==> [0037a76000 - 0037fef0d9]
<6>  #5 [0000655000 - 000065d000]    INIT_PG_TABLE ==> [0000655000 - 000065d000]
<6>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
<6>  #7 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
<6>  #8 [007e400000 - 007f600000]          KVA RAM
<6>  #9 [0036800000 - 0037a00000]           KVA PG ==> [0036800000 - 0037a00000]
<6>  #10 [0000014000 - 000001b000]          BOOTMAP ==> [0000014000 - 000001b000]
<6>found SMP MP-table at [c00ff780] 000ff780
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  Normal   0x00001000 -> 0x00038000
<4>  HighMem  0x00038000 -> 0x0007f6a0
<4>Movable zone start PFN for each node
<4>early_node_map[3] active PFN ranges
<4>    0: 0x00000010 -> 0x0000009f
<4>    0: 0x00000100 -> 0x0007e400
<4>    0: 0x0007f600 -> 0x0007f6a0
<7>On node 0 totalpages: 517167
<7>free_area_init_node: node 0, pgdat f6800000, node_mem_map f6802240
<7>  DMA zone: 3947 pages, LIFO batch:0
<7>  Normal zone: 223300 pages, LIFO batch:31
<7>  HighMem zone: 285333 pages, LIFO batch:31
<6>Using APIC driver default
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
<6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
<6>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
<6>Allocating PCI resources starting at 80000000 (gap: 7f700000:7f700000)
<6>PERCPU: Allocating 38556 bytes of per cpu data
<7>NR_CPUS: 128, nr_cpu_ids: 4, nr_node_ids 8
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512580
<4>Policy zone: HighMem
<5>Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 resume=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part5 splash=silent vga=0x317
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>Extended CMOS year: 2000
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PMTIMER calibration value
<4>Detected 3389.991 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Initializing HighMem for node 0 (00038000:0007f6a0)
<6>Memory: 2038112k/2087552k available (2357k kernel code, 30556k reserved, 1930k data, 292k init, 1151616k highmem)
<6>virtual kernel memory layout:
<6>    fixmap  : 0xff8b7000 - 0xfffff000   (7456 kB)
<6>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
<6>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<6>      .init : 0xc0539000 - 0xc0582000   ( 292 kB)
<6>      .data : 0xc034d5f5 - 0xc05301d0   (1930 kB)
<6>      .text : 0xc0100000 - 0xc034d5f5   (2357 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<7>hpet clockevent registered
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 6779.98 BogoMIPS (lpj=13559964)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
<6>CPU0: Thermal monitoring enabled
<6>Checking 'hlt' instruction... OK.
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 919 Objects with 63 Devices 254 Methods 32 Regions
<4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<6>Mapping cpu 0 to node 0
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
<6>Booting processor 1/1 ip 6000
<6>Initializing CPU#1
<6>Mapping cpu 1 to node 0
<6>Calibrating delay using timer specific routine.. 12995.94 BogoMIPS (lpj=25991895)
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
<6>CPU1: Thermal monitoring enabled
<6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
<6>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>Brought up 2 CPUs
<6>Total of 2 processors activated (19775.92 BogoMIPS).
<7>CPU0 attaching sched-domain:
<7> domain 0: span 0-1 level SIBLING
<7>  groups: 0 1
<7>  domain 1: span 0-1 level NODE
<7>   groups: 0-1
<7>CPU1 attaching sched-domain:
<7> domain 0: span 0-1 level SIBLING
<7>  groups: 1 0
<7>  domain 1: span 0-1 level NODE
<7>   groups: 0-1
<6>net_namespace: 1044 bytes
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
<6>PCI: Not using MMCONFIG.
<6>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1 for base access
<5>perfmon: version 2.82
<5>perfmon: CPU hotplug support enabled
<4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:...................................................................................................................................................................................
<4>Initialized 26/32 Regions 38/38 Fields 49/49 Buffers 66/67 Packages (928 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:
<4>Executed 0 _INI methods requiring 0 _STA executions (examined 69 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 2 Runtime GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
<5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
<6>PCI: Using MMCONFIG for extended config space
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: 0000:00:02.0 reg 10 32bit mmio: [fea00000, fea7ffff]
<7>PCI: 0000:00:02.0 reg 14 io port: [ec00, ec07]
<7>PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff]
<7>PCI: 0000:00:02.0 reg 1c 32bit mmio: [fe900000, fe9fffff]
<7>PCI: 0000:00:02.1 reg 10 32bit mmio: [fea80000, feafffff]
<7>PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe8f8000, fe8fbfff]
<6>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1b.0: PME# disabled
<6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1c.0: PME# disabled
<6>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1c.1: PME# disabled
<7>PCI: 0000:00:1d.0 reg 20 io port: [e400, e41f]
<7>PCI: 0000:00:1d.1 reg 20 io port: [e480, e49f]
<7>PCI: 0000:00:1d.2 reg 20 io port: [e800, e81f]
<7>PCI: 0000:00:1d.3 reg 20 io port: [e880, e89f]
<7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe8f7c00, fe8f7fff]
<6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1d.7: PME# disabled
<6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
<6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
<7>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
<7>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
<7>PCI: 0000:00:1f.1 reg 18 io port: [8f0, 8f7]
<7>PCI: 0000:00:1f.1 reg 1c io port: [8f8, 8fb]
<7>PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
<7>PCI: 0000:00:1f.2 reg 10 io port: [e080, e087]
<7>PCI: 0000:00:1f.2 reg 14 io port: [e000, e003]
<7>PCI: 0000:00:1f.2 reg 18 io port: [dc00, dc07]
<7>PCI: 0000:00:1f.2 reg 1c io port: [d880, d883]
<7>PCI: 0000:00:1f.2 reg 20 io port: [d800, d80f]
<6>pci 0000:00:1f.2: PME# supported from D3hot
<6>pci 0000:00:1f.2: PME# disabled
<7>PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
<7>PCI: 0000:01:00.0 reg 10 64bit mmio: [febc0000, febfffff]
<7>PCI: 0000:01:00.0 reg 30 32bit mmio: [feba0000, febbffff]
<6>pci 0000:01:00.0: PME# supported from D3hot D3cold
<6>pci 0000:01:00.0: PME# disabled
<4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
<7>PCI: bridge 0000:00:1c.1 32bit mmio: [feb00000, febfffff]
<6>pci 0000:00:1e.0: transparent bridge
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 4A, should be 45 [20080609]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 18 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 64-bit timers, 14318180 Hz
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
<6>system 00:07: ioport range 0x290-0x297 has been reserved
<6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:08: ioport range 0x800-0x87f has been reserved
<6>system 00:08: ioport range 0x480-0x4bf has been reserved
<6>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
<6>system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
<6>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
<6>system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
<6>system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
<6>system 00:11: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:11: iomem range 0xc0000-0xcffff could not be reserved
<6>system 00:11: iomem range 0xe0000-0xfffff could not be reserved
<6>system 00:11: iomem range 0x100000-0x7f6fffff could not be reserved
<6>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
<6>pci 0000:00:1c.0:   IO window: disabled
<6>pci 0000:00:1c.0:   MEM window: disabled
<6>pci 0000:00:1c.0:   PREFETCH window: disabled
<6>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:1c.1:   IO window: disabled
<6>pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
<6>pci 0000:00:1c.1:   PREFETCH window: disabled
<6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
<6>pci 0000:00:1e.0:   IO window: disabled
<6>pci 0000:00:1e.0:   MEM window: disabled
<6>pci 0000:00:1e.0:   PREFETCH window: disabled
<6>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:1c.0: setting latency timer to 64
<6>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
<7>pci 0000:00:1c.1: setting latency timer to 64
<7>pci 0000:00:1e.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
<6>bus: 02 index 0 mmio: [0, 0]
<6>bus: 02 index 1 mmio: [0, 0]
<6>bus: 02 index 2 mmio: [0, 0]
<6>bus: 02 index 3 mmio: [0, 0]
<6>bus: 01 index 0 mmio: [0, 0]
<6>bus: 01 index 1 mmio: [feb00000, febfffff]
<6>bus: 01 index 2 mmio: [0, 0]
<6>bus: 01 index 3 mmio: [0, 0]
<6>bus: 03 index 0 mmio: [0, 0]
<6>bus: 03 index 1 mmio: [0, 0]
<6>bus: 03 index 2 mmio: [0, 0]
<6>bus: 03 index 3 io port: [0, ffff]
<6>bus: 03 index 4 mmio: [0, ffffffffffffffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
<7>Switched to high resolution mode on CPU 0
<4> done
<6>Freeing initrd memory: 5604k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1240060588.600:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 435
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>perfmon: added sampling format default
<7>pci 0000:00:02.0: Boot video device
<7>pcieport-driver 0000:00:1c.0: setting latency timer to 64
<6>pcieport-driver 0000:00:1c.0: found MSI capability
<7>pci_express 0000:00:1c.0:pcie00: allocate port service
<7>pci_express 0000:00:1c.0:pcie02: allocate port service
<7>pci_express 0000:00:1c.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:1c.1: setting latency timer to 64
<6>pcieport-driver 0000:00:1c.1: found MSI capability
<7>pci_express 0000:00:1c.1:pcie00: allocate port service
<7>pci_express 0000:00:1c.1:pcie02: allocate port service
<7>pci_express 0000:00:1c.1:pcie03: allocate port service
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 8128k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 100719 bytes
<6>bootsplash: ...found (1024x768, 38691 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<7>hpet_resources: 0xfed00000 is busy
<6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 292k freed
<6>Write protecting the kernel text: 2360k
<6>Write protecting the kernel read-only data: 1748k
<6>processor ACPI_CPU:00: registered as cooling_device0
<6>processor ACPI_CPU:01: registered as cooling_device1
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ata_piix 0000:00:1f.1: version 2.12
<6>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
<7>ata_piix 0000:00:1f.1: setting latency timer to 64
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<6>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
<6>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
<7>ata_piix 0000:00:1f.2: setting latency timer to 64
<6>scsi2 : ata_piix
<6>scsi3 : ata_piix
<6>ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
<6>ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
<6>ata3.00: ATA-7: SAMSUNG HD200HJ, KF100-06, max UDMA7
<6>ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>ata3.01: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
<6>ata3.00: configured for UDMA/133
<6>ata3.01: configured for UDMA/100
<5>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD200HJ  KF10 PQ: 0 ANSI: 5
<5>scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
<6>Uniform Multi-Platform E-IDE driver
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<6>udevd version 128 started
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<5>sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors: (200GB/186GiB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors: (200GB/186GiB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 <<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8f7c00
<4> sda5<6>USB Universal Host Controller Interface driver v3.0
<4> sda6 >
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.21-0.1-pae ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.7
<6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.21-0.1-pae uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb 1-4: new high speed USB device using ehci_hcd and address 5
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb 1-4: configuration #1 chosen from 1 choice
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb 1-4: New USB device found, idVendor=057c, idProduct=8401
<6>usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
<6>usb 1-4: Product: FRITZ!WLAN USB Stick N
<6>usb 1-4: Manufacturer: AVM Berlin
<6>usb 1-4: SerialNumber: 001F3F009FDB
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.21-0.1-pae uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.1
<6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>usb 1-5: new high speed USB device using ehci_hcd and address 6
<6>hub 4-0:1.0: 2 ports detected
<6>usb 1-5: configuration #1 chosen from 1 choice
<6>usb 1-5: New USB device found, idVendor=1307, idProduct=0163
<6>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-5: Product: USB Mass Storage Device
<6>usb 1-5: Manufacturer: USBest Technology
<6>usb 1-5: SerialNumber: 07071900000439
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.21-0.1-pae uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.2
<6>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
<7>uhci_hcd 0000:00:1d.3: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>usb 2-1: new full speed USB device using uhci_hcd and address 2
<6>hub 5-0:1.0: 2 ports detected
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.27.21-0.1-pae uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.3
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: New USB device found, idVendor=0c45, idProduct=613e
<6>usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 2-1: Product: USB camera
<6>PM: Starting manual resume from disk
<6>usb 2-2: new full speed USB device using uhci_hcd and address 3
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>hub 2-2:1.0: USB hub found
<6>hub 2-2:1.0: 2 ports detected
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>usb 2-2: New USB device found, idVendor=043d, idProduct=007a
<6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-2: Product: USB Hub
<6>usb 2-2: Manufacturer: Lexmark
<6>usb 3-1: new low speed USB device using uhci_hcd and address 2
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>usb 3-1: New USB device found, idVendor=04fc, idProduct=05d8
<6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 3-1: Product: Trust Deskset 15176
<6>usb 3-1: Manufacturer: MLK
<6>usb 2-2.1: new full speed USB device using uhci_hcd and address 4
<6>usb 2-2.1: configuration #1 chosen from 1 choice
<6>usb 2-2.1: New USB device found, idVendor=043d, idProduct=007d
<6>usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
<6>usb 2-2.1: Product: X1200 Series
<6>usb 2-2.1: Manufacturer: Lexmark
<6>usb 2-2.1: SerialNumber: 5C000YW
<6>usb 2-2.2: new full speed USB device using uhci_hcd and address 5
<6>usb 2-2.2: configuration #1 chosen from 1 choice
<6>usb 2-2.2: New USB device found, idVendor=043d, idProduct=00ff
<6>usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 2-2.2: Product: Lexmark 1200 Series
<6>usb 2-2.2: Manufacturer: Lexmark 
<6>usb 2-2.2: SerialNumber: 5C000YW
<6>udevd version 128 started
<5>sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 2:0:1:0: Attached scsi generic sg1 type 5
<6>ndiswrapper version 1.54 loaded (smp=yes, preempt=no)
<6>Linux agpgart interface v0.103
<5>intel_rng: FWH not detected
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>vendor=8086 device=27d2
<6>atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<7>atl1 0000:01:00.0: setting latency timer to 64
<6>atl1 0000:01:00.0: version 2.1.3
<6>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>usb 1-4: reset high speed USB device using ehci_hcd and address 5
<6>Linux video capture interface: v2.00
<6>Initializing USB Mass Storage driver...
<6>agpgart-intel 0000:00:00.0: Intel G33 Chipset
<6>agpgart-intel 0000:00:00.0: detected 7164K stolen memory
<6>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 2:0:1:0: Attached scsi CD-ROM sr0
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, y3k, hpet irqs
<6>ACPI: Power Button (CM) [PWRB]
<6>sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
<6>iTCO_vendor_support: vendor-support=0
<6>ndiswrapper: driver fwusbn (AVM Berlin,12/19/2007,4.0.0.48) loaded
<6>parport_pc 00:06: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
<6>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>ppdev: user-space parallel port driver
<6>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>HDA Intel 0000:00:1b.0: setting latency timer to 64
<6>wlan0: ethernet device 00:1f:3f:00:9f:db using NDIS driver: fwusbn, version: 0x40700, NDIS version: 0x501, vendor: 'Atheros OTUS Wireless Network Adapter', 057C:8401.F.conf
<6>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
<6>scsi4 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 6
<7>usb-storage: waiting for device to settle before scanning
<6>usb 2-1: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613E)
<3>usb 2-1: No supported image sensor detected for this bridge
<6>usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x043D pid 0x00FF
<6>usbcore: registered new interface driver ndiswrapper
<6>usbcore: registered new interface driver usblp
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver sn9c102
<6>input: MLK Trust Deskset 15176 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
<6>input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Deskset 15176] on usb-0000:00:1d.1-1
<6>Fixing up Sunplus Wireless Desktop report descriptor
<6>input: MLK Trust Deskset 15176 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input4
<6>input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK Trust Deskset 15176] on usb-0000:00:1d.1-1
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>Adding 3903752k swap on /dev/sda5.  Priority:-1 extents:1 across:3903752k
<5>scsi 4:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
<5>sd 4:0:0:0: [sdb] 3948543 512-byte hardware sectors: (2.02GB/1.88GiB)
<5>sd 4:0:0:0: [sdb] Write Protect is off
<7>sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 4:0:0:0: [sdb] 3948543 512-byte hardware sectors: (2.02GB/1.88GiB)
<5>sd 4:0:0:0: [sdb] Write Protect is off
<7>sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
<3>sd 4:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb:<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<4> sdb1
<5>sd 4:0:0:0: [sdb] Attached SCSI removable disk
<5>sd 4:0:0:0: Attached scsi generic sg2 type 0
<7>usb-storage: device scan complete
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sat Apr 18 13:16:32 2009

Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part5
Invoking userspace resume from /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part5
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part5
Invoking in-kernel resume from /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part5
Waiting for device /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 to appear:  ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 
/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1: clean, 200244/915712 files, 1149347/3662812 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sat Apr 18 15:16:34 2009

done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Activating device mapper...
done
Starting MD Raid unused
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part6: clean, 2054/11051008 files, 778456/44200831 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda6 on /home type ext3 (rw,acl,user_xattr)
doneLoading fuse module done
Mounting fuse control filesystemdone
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(634,29)
Creating /var/log/boot.msg
doneEnabling syn flood protectiondone
Disabling IP forwardingdone
done
ATTENTION: You have modified /etc/resolv.conf.  Leaving it untouched...
You can find my version in /etc/resolv.conf.netconfig ...
Setting up hostname 'Multimedia'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(634,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Sat Apr 18 15:16:42 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5
Initializing random number generatordone
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up


Starting acpid done
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
acpid: 2 rules loaded


<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Loading CPUFreq modulesSetting up (localfs) network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
              No configuration found for eth0
unusedSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .done
 (CPUFreq not supported)
Starting HAL daemon<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
Starting rpcbind done
Starting auditd done
Not starting NFS client services - no NFS found in /etc/fstab:unused
done
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
done
Loading console font lat9w-16.psfu  -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 2721
Starting java.binfmt_misc done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting cupsddone
Starting Name Service Cache Daemondone
Starting Avahi daemon done
Starting smartd done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting mail service (Postfix)done
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting wicddone
Setting up (remotefs) network interfaces:
    wlan0     
    wlan0     starting wpa_supplicant
ioctl[SIOCSIWPMKSA]: Invalid argument
ioctl[SIOCSIWPMKSA]: Invalid argument
<notice>startproc: execve (/usr/sbin/wicd) [ /usr/sbin/wicd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJDPPB04041-part1 _=/sbin/startproc DAEMON=/usr/sbin/wicd ]
    wlan0     Starting DHCP4 client<notice>checkproc: /usr/bin/kdm 2721
. /var/run/wicd/wicd.pid
. . . .  
    wlan0     IP address: 192.168.178.25/24
doneSetting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: nfs
<notice>killproc: kill(2072,3)
 
A

Anonymous

Gast
einmal drüber geflogen ;) ;)

Keine Meldung von Startscipt gefunden das genau das macht.

Befehl als Root
Code: 
insserv /etc/rc.d/smbfs
(so nennt sich das Scipt jedenfalls auf meinem noch 10.2) sollte das Problem beim nächsten boot beheben.

robi
 
OP
B

BuBu2009

Newbie
robi schrieb:
einmal drüber geflogen ;) ;)

Keine Meldung von Startscipt gefunden das genau das macht.

Befehl als Root
Code: 
insserv /etc/rc.d/smbfs
(so nennt sich das Scipt jedenfalls auf meinem noch 10.2) sollte das Problem beim nächsten boot beheben.

robi
Zum Vergrößern anklicken....

Also bei mir gibt es dieses Script nicht, zum anderen wird doch die Freigabe über fstab geladen, bzw sollte dies.

mfg

EDIT: Ach mano ich würd auch mal das Samba Paket installieren........ :???:
 
A

Anonymous

Gast
Möglich das in den neuen Versionen da etwas anders ist, bei mir sucht dieses Script auch in der fstab
Code: 
 grep -q '^[[:space:]]*[^#].*[[:space:]]cifs[[:space:]]' /etc/fstab
                rc=$?
                if [ ! -f ${SMBFSTAB} -a ${rc} -ne 0 ]; then
                        echo -n >&2 "No ${SMBFSTAB} found and no type cifs active in /etc/fstab. "
                        rc_status -s
                        exit 6

robi
 
S

stka

Guru
du hast eine erheblich größere Chance das dir einer hilft, wenn du solche Logfiles auf das wesentliche beschränkst und nicht einfach ohne Sinn und Verstand das ganz logfile hier postest das zeit nämlich, dass du dich selber noch nicht damit beschäftigt hast.
 
T

Tooltime

Advanced Hacker
robi schrieb:
Möglich das in den neuen Versionen da etwas anders ist, bei mir sucht dieses Script auch in der fstab
Zum Vergrößern anklicken....
Ist im Prinzip immer noch so, die Scripte für die Dienste liegen jetzt aber unter /etc/init.d/. Ich würde mal den Befehl insserv -d smbfs vorschlagen, dann spielt es auch keine Rolle wo die Scripte nun sind.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben