Sören
Member
Hallo,
ich ärgere mich seit einigen Tagen mit Systemabstürzen herum, die wie folgt aussehen:
Das system friert einfach ein und ich kann noch nichtmal mehr mit SYS-RQ-Tasten den Rechner beenden, sondern muss wirklich zum stromschalter greifen.
Das tritt nur auf, wenn ich im Internet bin, bzw. wenn die Wlan-Karte aktiviert ist.
Ich hatte erst im Verdacht, dass das nur passiert, wenn das radeon -Modul gleichzeitig geladen ist, aber das modul habe ich nun mit der Zeile "blacklist radeon" in /etc/modprobe.d/blacklist herausgeworfen und trotzdem tritt das Problem noch auf.
Den Arbeitsspeicher habe ich schonmal überprüft, und fsck zeigt keine Badblocks im Read-only-test an. (ich weiß nicht, ob das ausreicht, orphaned inodes gabs teilweise recht viele, aber halt keine Badblocks.)
Der Absturz war hier um 13:49. Aber in /var/log/messages steht nichts wildes.
System:
OS 11.0,
Kernel 2.6.27.13-4-default (das Problem tritt auch beim offiziellen, älteren Suse-Kernel auf)
WLAN: Atheros Communications Inc. AR5212/AR5213
Grafik: Radeon X1300
Kann mir jemand helfen?
Gruß
Sören
ich ärgere mich seit einigen Tagen mit Systemabstürzen herum, die wie folgt aussehen:
Das system friert einfach ein und ich kann noch nichtmal mehr mit SYS-RQ-Tasten den Rechner beenden, sondern muss wirklich zum stromschalter greifen.
Das tritt nur auf, wenn ich im Internet bin, bzw. wenn die Wlan-Karte aktiviert ist.
Ich hatte erst im Verdacht, dass das nur passiert, wenn das radeon -Modul gleichzeitig geladen ist, aber das modul habe ich nun mit der Zeile "blacklist radeon" in /etc/modprobe.d/blacklist herausgeworfen und trotzdem tritt das Problem noch auf.
Den Arbeitsspeicher habe ich schonmal überprüft, und fsck zeigt keine Badblocks im Read-only-test an. (ich weiß nicht, ob das ausreicht, orphaned inodes gabs teilweise recht viele, aber halt keine Badblocks.)
Der Absturz war hier um 13:49. Aber in /var/log/messages steht nichts wildes.
Code:
Feb 14 13:37:29 linux dhclient: caught deadly SIGTERM
Feb 14 13:37:29 linux dhclient: could not restore resolv.conf: No such file or directory
Feb 14 13:37:45 linux gconfd (soeren-3668): (Version 2.22.0) wird gestartet, Prozesskennung 3668, Benutzer »soeren«
Feb 14 13:37:45 linux gconfd (soeren-3668): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Feb 14 13:37:45 linux gconfd (soeren-3668): Die Adresse »xml:readwrite:/home/soeren/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Feb 14 13:37:45 linux gconfd (soeren-3668): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Feb 14 13:37:45 linux gconfd (soeren-3668): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.vendor« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Feb 14 13:37:45 linux gconfd (soeren-3668): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.schemas« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Feb 14 13:38:04 linux su: (to root) soeren on /dev/pts/2
Feb 14 13:38:45 linux kernel: ath5k phy0: noise floor calibration timeout (2442MHz)
Feb 14 13:38:57 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
Feb 14 13:41:46 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
Feb 14 13:41:47 linux kernel: ath5k phy0: noise floor calibration timeout (2442MHz)
Feb 14 13:41:47 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
Feb 14 13:41:47 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try1
Feb 14 13:41:47 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try1
Feb 14 13:41:48 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try2
Feb 14 13:41:48 linux kernel: wlan1 direct probe responded
Feb 14 13:41:48 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:41:48 linux kernel: wlan1: authenticated
Feb 14 13:41:48 linux kernel: wlan1: associate with AP 00:12:43:4e:35:f0
Feb 14 13:41:48 linux kernel: wlan1: deauthenticated
Feb 14 13:41:49 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try1
Feb 14 13:41:49 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try2
Feb 14 13:41:49 linux kernel: wlan1 direct probe responded
Feb 14 13:41:49 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:41:49 linux kernel: wlan1: authenticated
Feb 14 13:41:49 linux kernel: wlan1: associate with AP 00:12:43:4e:35:f0
Feb 14 13:41:49 linux kernel: wlan1: RX ReassocResp from 00:12:43:4e:35:f0 (capab=0x421 status=0 aid=187)
Feb 14 13:41:49 linux kernel: wlan1: associated
Feb 14 13:43:47 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:43:47 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:43:47 linux kernel: wlan1: authenticated
Feb 14 13:43:47 linux kernel: wlan1: associate with AP 00:12:43:4e:35:f0
Feb 14 13:43:47 linux kernel: wlan1: RX ReassocResp from 00:12:43:4e:35:f0 (capab=0x421 status=0 aid=188)
Feb 14 13:43:47 linux kernel: wlan1: associated
Feb 14 13:45:12 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
Feb 14 13:47:17 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
Feb 14 13:47:47 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:47:47 linux syslog-ng[2047]: last message repeated 2 times
Feb 14 13:47:47 linux kernel: wlan1: authenticated
Feb 14 13:47:47 linux kernel: wlan1: associate with AP 00:12:43:4e:35:f0
Feb 14 13:47:47 linux kernel: wlan1: deauthenticated
Feb 14 13:47:48 linux kernel: wlan1: direct probe to AP 00:12:43:4e:35:f0 try1
Feb 14 13:47:48 linux kernel: wlan1 direct probe responded
Feb 14 13:47:48 linux kernel: wlan1: authenticate with AP 00:12:43:4e:35:f0
Feb 14 13:47:48 linux kernel: wlan1: authenticated
Feb 14 13:47:48 linux kernel: wlan1: associate with AP 00:12:43:4e:35:f0
Feb 14 13:47:48 linux kernel: wlan1: RX ReassocResp from 00:12:43:4e:35:f0 (capab=0x421 status=0 aid=189)
Feb 14 13:47:48 linux kernel: wlan1: associated
Feb 14 13:49:31 linux kernel: ath5k phy0: noise floor calibration timeout (2412MHz)
System:
OS 11.0,
Kernel 2.6.27.13-4-default (das Problem tritt auch beim offiziellen, älteren Suse-Kernel auf)
WLAN: Atheros Communications Inc. AR5212/AR5213
Grafik: Radeon X1300
Kann mir jemand helfen?
Gruß
Sören