• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Logitech Webcam

okko

Newbie
Hallo,

ich weiß nicht wo ich ansetzen soll. Meine mehrtägige Recherche im Internet hat nicht geholfen.
Ich habe eine Logitech Quickcam Notebook Pro, diese wird auch vom System erkannt, allerdings kann ich diese nicht in Programmen wie Kopete bzw Skype als Videogerät auswählen, weil sie nicht aufgelistet wird.Ich habe eine TV-Karte. Diese wird allerdings angezeigt .
Ich benutze opensuse 11.2 mit KDE 4.
Ich würde mich freuen wenn mir jemand einen Tip geben könnte.

Danke

okko
 

Divine

Hacker
Na was heisst denn vom system erkannt? Schick doch mal bitte ein lsusb bzw lspci mit. Dann kann man genauer nachforschen ob denn weitere treiber notwendig sind.
 

whois

Ultimate Guru
Kommt bei
Code:
lsusb
sowas hier raus?

Code:
Bus 001 Device 004: ID 046d:0991 Logitech, Inc. QuickCam Pro for Notebooks

Hast du die Firmware installiert?
 
OP
O

okko

Newbie
okay,

okko@linux-50ac:~> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 004: ID 046d:08ae Logitech, Inc. QuickCam for Notebooks
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


inux-50ac:/home/okko # lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:00.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)

laut openSuSE Hardware-Kompabilititätsliste - Webcams : funktioniert "out of the box" (im Kernel integriert)
daher habe ich mir keine Gedanken um ne Firmware gemacht....

Vielen Dank schonmal

okko
 
OP
O

okko

Newbie
Hallo Divine, Hallo whois und Hallo misiu !!!! :D

Ihr werdet mir hoffentlich nachsehen, dass ich eure Zeit "gestohlen" habe... :/

Aber das gibt es nicht. Hab mich schon gefreut das nun jemand meine Log Dateien auswertet und mir sagt was zu tun ist.
DAS IST NICHT MEHR NÖTIG !!

Danke an Alle die mir helfen wollten.

Der kleine Satz von misiu hat mich kurz zum Nachdenken gebracht. Ja, ich hab die Camera im USB Hub betrieben. Im selben Hub in dem auch Drucker, ext HDD und ext DVD-Brenner klaglos ihren Dienst verrichten.
Habe dann die Camera (nicht das ich dachte es bringt was) mal in einen freien USB Port am PC eingesteckt, SIE LÄUFT, SOFORT, EINFACH SO !!
Ihr könnt euch nicht vorstellen wie oft ich schon versucht hab meine Webcam an's laufen zu bringen. :zensur:

DANKE !!

okko
 

misiu

Moderator
Teammitglied
War mir schon irgendwie verdächtig, weil:
Code:
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
deswegen die Frage
;-)

MfG
misiu
 
Oben